Feit Electric WORK2000 2000 Lumens Rechargeable Portable LED Work Light Instruction Manual

1. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, oswa blesi grav.

• AVÈTISMAN: These LED lights are extremely bright. Never point toward your eyes or people around you. Do not point at moving vehicles or aircraft.
• Danje boule: Do not touch the lens when the light is on or immediately after use, as it may be hot.
• Kenbe limyè travay la lwen materyèl ki ka pran dife.
• Do not immerse the unit in water. This product is UL wet rated, meaning it can withstand wet conditions, but it is not submersible.
• Do not attempt to disassemble, repair, or modify the unit. Contact qualified service personnel for repairs.
• Ensure the charging cable and port are dry before connecting to power.
• Operating temperature range: 32°F to 113°F (0°C to 45°C). Discharge temperature range: -4°F to 113°F (-20°C to 45°C).

Image: Control panel with safety warning and operational details.

2. Pwodwi souview

The Feit Electric WORK2000 is a durable, rechargeable, and portable LED work light designed for various applications. It features a robust cast metal housing and is UL wet rated for both indoor and outdoor use.

Karakteristik kle:

• Ekleraj ultra klere: Outputs up to 2000 lumens of 6500K Daylight color temperature light.
• Klate reglabl: Five preset lighting levels (2000, 1600, 1200, 750, or 350 lumens).
• Batri rechargeable: Integrated lithium-ion battery provides up to 10 hours of continual light at the lowest setting.
• USB Power Bank: Features a 1 AMP USB port to charge external devices like smartphones.
• Konsepsyon pòtab: Attached foldable handle allows for easy transport and setup on various surfaces.
• Endikatè batri: Built-in indicator displays the current battery level.

Imaj: Devan view of the WORK2000 portable LED work light.

Image: Product packaging illustrating key features and design.

3. Enstalasyon

Charging the Work Light:

1. Locate the charging port on the control panel of the work light.
2. Connect the included charging cable to the work light's charging port.
3. Plug the other end of the charging cable into a compatible USB power adapter (not included) or a USB power source.
4. The battery level indicator lights will illuminate to show charging progress. The indicator will blink while charging.
5. A full charge typically takes several hours. The indicator lights will show a solid charge when complete.

Nòt: The battery level indicator will blink while charging. Charging time will be longer while the light is in use.

Image: Control panel detailing the charging port and battery indicator.

4. Operasyon Enstriksyon

Limen/Etenyen:

• Press the power button (labeled '1' on the control panel image) to turn the work light on or off.

Ajiste klète:

• Use the brightness adjustment buttons (labeled '2' on the control panel image, '+' for increase, '-' for decrease) to cycle through the five brightness levels.
• Available brightness levels and approximate run times:

Sèvi ak kòm yon bank pouvwa:

• The work light includes a 1 AMP USB output port (labeled '5V1A' on the control panel image).
• Connect your USB-powered device (e.g., smartphone) to this port using its charging cable to utilize the work light as a portable power bank.

Endikatè nivo batri:

• The battery level indicator (labeled '3' on the control panel image) shows the remaining charge:

• Four solid lights: 80% - 100% charge
• Three solid lights: 60% - 79% charge
• Two solid lights: 20% - 59% charge
• One solid light: 1% - 19% charge

Foldable Handle and Stand:

• The integrated handle can be folded to serve as a stand, allowing you to position the light at various angles for optimal illumination.
• The handle also facilitates easy carrying of the work light.

Image: Work light in use, providing illumination for electrical work.

Image: Work light in use, providing illumination for mechanical work.

5. Antretyen

Netwayaj:

• Ensure the work light is turned off and unplugged before cleaning.
• Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Avoid getting moisture into the charging port or USB output port.

Depo:

• Store the work light in a cool, dry place away from direct sunlight and extreme temperatures.
• For prolonged storage, it is recommended to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

NAN. Depanaj

• Limyè pa limen: Ensure the battery is charged. If the battery is low, connect the charging cable and allow it to charge.
• Limyè a pa chaje: Verify that the charging cable is securely connected to both the work light and the power source. Check if the power source is active. Ensure the charging port is clean and free of debris.
• Short run time: Battery run time varies significantly with brightness level. Ensure the light is fully charged. Battery performance may decrease over time with repeated use and charging cycles.
• USB power bank not charging devices: Ensure the work light has sufficient battery charge. Check the connection between the device and the USB output port.

If you experience issues not covered here, please refer to the support section for assistance.

7. Espesifikasyon

Imaj: Dyagram dimansyon pwodwi a.

Image: Manufacturer's detailed specifications sheet.

8. Enfòmasyon sou Garanti

The Feit Electric WORK2000 Rechargeable Portable LED Work Light comes with a 1-ane garanti limite from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.

9. Sipò

For 24/7 customer support, troubleshooting assistance, or any product-related inquiries, please visit the official Feit Electric help center:

Visit Feit Electric Help Center

Image: Customer support contact information.