Artemide Yanzi Table Lamp (Model USC-1101010A) Instruction Manual

1. Entwodiksyon

The Artemide Yanzi Table Lamp is a decorative lighting fixture designed to provide elegant illumination for modern interiors. This manual provides essential information for the safe and proper setup, operation, and maintenance of your Yanzi Table Lamp.

Figi 1: The Artemide Yanzi Table Lamp. This image displays the Artemide Yanzi Table Lamp. It features a spherical, opaque white glass diffuser resting on a slender, angled brass-colored arm. The arm is supported by a dark, horizontal base. A power cord is visible extending from the back.

2. Eleman yo

The Artemide Yanzi Table Lamp consists of the following primary components:

• Brass Structure: The main body and arm of the lamp, providing structural support and aesthetic appeal.
• Blown Glass Diffuser: A spherical, opaque glass element that houses the LED light source and diffuses light evenly.
• Integrated LED Light Source: An energy-efficient light-emitting diode system.
• Microswitch Dimmer: An integrated control for adjusting light intensity.
• Kòd pouvwa: For connecting the lamp nan yon priz elektrik.

3. Enstalasyon ak Enstalasyon

The Yanzi Table Lamp is designed for tabletop installation and requires minimal setup.

1. Dekonpoze: Retire tout konpozan yo nan anbalaj la avèk prekosyon. Kenbe anbalaj la pou transpò oswa depo pita.
2. Plasman: Pozisyon lamp on a stable, flat surface in your desired location, such as a table in a bedroom, living room, or office. Ensure the surface can support the lamp's weight and that there is adequate space around it.
3. Koneksyon pouvwa: Ploge kòd elektrik la nan yon priz elektrik estanda 120V.
4. Enspeksyon: Before operation, visually inspect the lamp for any signs of damage that may have occurred during shipping. If damage is found, do not proceed with operation and contact customer support.

4. Operasyon Enstriksyon

The Yanzi Table Lamp features an integrated microswitch dimmer for light control.

• Limen/Etenyen: Locate the microswitch dimmer on the lamp's base or arm. A single press will typically turn the lamp sou oswa koupe.
• Dimming: To adjust the brightness, press and hold the microswitch dimmer. The light intensity will gradually increase or decrease. Release the switch when the desired brightness level is reached.

L laamp utilizes an LED light source, which is not user-replaceable. Do not attempt to open the light source housing.

5. Swen ak Antretyen

Proper care will ensure the longevity and appearance of your Artemide Yanzi Table Lamp.

• Netwayaj: Dekonekte lamp from the power source before cleaning. Use a soft, dry cloth to gently wipe the brass structure and glass diffuser. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Manyen: Manyen l laamp with care, especially the glass diffuser, to prevent breakage.
• Anviwònman: Pa ekspoze lamp to excessive moisture or extreme temperatures. This lamp se pa enpèmeyab.

NAN. Depanaj

If you encounter issues with your Yanzi Table Lamp, gade solisyon komen sa yo:

• Lamp pa limen:
  • Asire w ke kòd kouran an byen branche nan yon priz elektrik ki fonksyone.
  • Check if the outlet itself is functional by plugging in another device.
  • Verify that the microswitch dimmer is being pressed correctly.
• Limyè a tranble oswa diminye sanzatann:
  • Asire w ke koneksyon kouran an estab.
  • Si pwoblèm nan kontinye, kontakte sipò kliyan.

For problems not addressed here, or if troubleshooting steps do not resolve the issue, please contact Artemide customer support.

7. Espesifikasyon

8. Garanti ak sipò

For information regarding warranty coverage, product support, or service inquiries, please contact Artemide customer service directly. Keep your purchase receipt as proof of purchase.

Artemide Contact Information: Please refer to the official Artemide websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.