Ferrex 20V Cordless Jigsaw User Manual

1. Enfòmasyon enpòtan sou sekirite

Toujou li epi konprann tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon ki vini ak zouti elektrik sa a. Si ou pa swiv tout enstriksyon ki anba yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

• Sekirite Zòn Travay: Kenbe zòn travay ou pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Evite kontak kò ak sifas ki konekte ak tè. Pa ekspoze zouti elektrik yo anba lapli oswa nan kondisyon mouye.
• Sekirite Pèsonèl: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte pake batri a nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Itilizasyon ak swen zouti batri: Rechaje sèlman avèk plato ki espesifye pa manifakti a. Sèvi ak zouti elektrik sèlman avèk pil ki fèt espesyalman pou sa.

2. Pake kontni

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.

• 1 x Ferrex 20V Cordless Jigsaw (Bare Unit)
• 1 x Parallel Guide
• 1 x Jigsaw Blade
• 1 x Dust Extraction Adapter
• 1 x manyèl itilizatè

Nòt: Battery and charger are not included with this bare unit and must be purchased separately.

3. Pwodwi souview

Familiarize yourself with the components of your Ferrex 20V Cordless Jigsaw before operation.

Imaj 3.1: Devan view of the Ferrex 20V Cordless Jigsaw, showing the blade, base plate, and parallel guide attachment.

Konpozan kle:

1. Chanjman deklanche: Aktive zouti a.
2. Bouton fèmen: Pou operasyon kontinyèl.
3. Kontwòl vitès Dial: Ajiste vitès koupe a.
4. Pendulum Action Selector: Controls the orbital action of the blade.
5. Lam Clamp: Li byen sere lam si a.
6. Plak baz: Supports the tool on the workpiece.
7. Levier Ajisteman Bizote: For changing the cutting angle of the base plate.
8. Dust Blower Nozzle: Directs air to clear the cutting line.
9. Pò pou ekstraksyon pousyè: For connecting the dust extraction adapter.
10. Limyè travay ki ap dirije: Eklere zòn koupe a.

4. Enstalasyon

4.1 Enstalasyon batri

This jigsaw operates with a 20V battery (not included). Ensure the battery is fully charged before use.

• Align the battery pack with the battery port on the rear of the jigsaw handle.
• Glise pake batri a nan pò a jiskaske li fè yon klik byen fèm nan plas li.
• Pou retire li, peze bouton lage batri a epi glise batri a soti.

Imaj 4.1: Side view of the Ferrex 20V Cordless Jigsaw with a 20V battery pack inserted.

4.2 Enstalasyon lam (san zouti)

The jigsaw features a quick-change tool holder system for easy blade replacement.

• Asire w ou retire batri a nan zouti a.
• Jwenn klou lam laamp lever at the front of the tool.
• Pouse lam la clamp lever forward to open the blade clamp.
• Insert the shank of the jigsaw blade fully into the clamp ouvèti a, asire w ke dan yo fè fas pi devan.
• Lage cl lamamp lever. The blade should be securely held. Gently pull on the blade to confirm it is locked.
• To remove a blade, push the clamp levye a pi devan epi rale lam la deyò.

Imaj 4.2: A standard jigsaw blade and the parallel guide accessory.

4.3 Parallel Guide Installation

The parallel guide assists in making straight cuts parallel to an edge.

• Slide the parallel guide rod into the guide slots on the base plate.
• Adjust the guide to the desired cutting width.
• Tighten the locking screw(s) to secure the guide in place.

4.4 Dust Extraction Adapter

Attach the dust extraction adapter to the dust port at the rear of the tool to connect a vacuum cleaner for dust collection.

5. Operasyon Enstriksyon

5.1 Limen/Etenyen

• Pou kòmanse zouti a, peze bouton deklanche a.
• For continuous operation, press the lock-on button while the trigger is depressed. Release the trigger to stop the tool.
• To stop the tool from continuous operation, press the trigger switch again.

5.2 Kontwòl vitès

The electronic speed control allows adjustment of the cutting speed from 500 to 3,000 strokes per minute (SPM). Use lower speeds for harder materials or intricate cuts, and higher speeds for softer materials or faster cutting.

• Rotate the speed control dial to select the desired speed setting.

5.3 Pendulum Action Adjustment

3-s yotage pendulum action (orbital action) allows the blade to move in an elliptical motion, increasing cutting speed and efficiency, especially in softer materials. The '0' setting is for straight cuts and fine finishes.

• Anviwònman 0: No pendulum action. For fine, precise cuts in wood, metal, and plastic.
• Anviwònman I: Small pendulum action. For general cutting in wood and plastic.
• Anviwònman II: Medium pendulum action. For faster cutting in wood.
• Anviwònman III: Large pendulum action. For very fast, rough cutting in wood.

Adjust the pendulum action using the selector switch on the side of the tool.

5.4 Bevel Angle Adjustment (Tool-Free)

The base plate can be adjusted for bevel cuts at angles of 0°, 15°, 30°, and 45°.

• Asire w retire batri a.
• Locate the bevel adjustment lever beneath the base plate.
• Loosen the lever and tilt the base plate to the desired angle. The tool has detents for common angles.
• Tighten the lever to secure the base plate at the chosen angle.

5.5 Teknik Koupe

Toujou asire w ke pyès la byen sere.amped. Allow the blade to reach full speed before engaging the material. Apply steady, even pressure; do not force the tool.

Imaj 5.1: A user wearing gloves operating the Ferrex 20V Cordless Jigsaw to cut a wooden board.

• Koupe Dwat: Use the parallel guide for accuracy.
• Koupe Koub: Use a narrow blade and a slower speed.
• Koupe plonje: Only perform plunge cuts if you are experienced and the material allows. Otherwise, drill a pilot hole.
• Espesifikasyon materyèl: Use appropriate blades for wood, metal, or plastic. For metal, apply cutting lubricant.

5.6 LED Work Light and Air Blast Function

The integrated LED work light illuminates the cutting line, improving visibility. The air blast function directs air towards the cutting line to keep it clear of sawdust, further enhancing visibility.

6. Antretyen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan si ou a.

• Netwayaj: Apre chak itilizasyon, netwaye zouti a avèk yon twal mou,amp cloth. Do not use harsh chemicals or abrasive cleaners. Clear sawdust from the ventilation slots and blade area.
• Swen lam: Inspect blades regularly for sharpness and damage. Replace dull or bent blades immediately.
• Enspeksyon jeneral: Periodically check all screws and fasteners for tightness. Inspect the power cord (if applicable) and battery contacts for damage.
• Depo: Sere zouti a nan yon kote ki sèk, an sekirite, kote timoun pa ka rive. Retire pil la anvan ou sere l.

NAN. Depanaj

If you encounter issues with your jigsaw, refer to the following common problems and solutions:

8. Espesifikasyon

Technical data for the Ferrex 20V Cordless Jigsaw.

9. Garanti ak sipò

This Ferrex 20V Cordless Jigsaw is manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.