ECHOGEAR EGLF324 Full Motion TV Wall Mount Instruction Manual

1. Enfòmasyon sou Sekirite

Please read this entire manual before installation and use. If you have any questions, contact ECHOGEAR customer support. Improper installation can result in property damage or personal injury.

• Kapasite pwa: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This mount is designed for TVs between 43" and 82".
• Stud Mounting Only: This mount is designed for installation into wood studs. PA FÈ mount into drywall alone. Ensure studs are located accurately.
• Verify VESA Pattern: Ensure your TV's VESA pattern (mounting holes on the back) is compatible with this mount (200x100 to 600x400).
• Zouti: Use appropriate tools for installation. A ratchet is recommended for securing lag bolts.
• Asistans: Due to the size and weight of TVs, two people are recommended for safe installation.

2. Pake kontni

Verify all components are present before beginning installation. If any parts are missing or damaged, contact ECHOGEAR customer support.

Materyèl ki enkli:

• Full Motion TV Wall Mount Assembly
• Extension Brackets (for 24" stud spacing)
• Modèl Forage
• Assortment of TV screws and spacers
• Lag Bolts and Washers
• Cable Management Clips (2x)
• End Caps for aesthetic finishing

3. Pwodwi Features

The ECHOGEAR EGLF324 Full Motion TV Wall Mount offers versatile positioning and robust support for your television.

• Inivèsèl konpatibilite: Supports 43" to 82" TVs weighing up to 110 lbs. Compatible with VESA patterns from 200x100 to 600x400.
• Flexible Stud Spacing: Designed to accommodate both 16" and 24" stud spacing with included extension brackets.
• Kapasite Mouvman Konplè: Pran plezi nan pi bon fason posib viewing angles with 19" of extension, 140° of swivel, and 15° of tilt.
• Post-Installation Adjustments: Allows for 5.4" lateral shift (left or right) and ±3° post-installation leveling for perfect screen alignment.
• Jesyon kab entegre: Features a through-arm channel and two cable clips to keep cables organized and out of sight.

4. Enstalasyon

Follow these steps carefully to install your ECHOGEAR EGLF324 TV Wall Mount. A detailed video guide is also available below.

Etap enstalasyon:

1. Tache parantèz sou televizyon: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
2. Find Studs: Use a stud finder to locate the center of your wood studs in the desired mounting location. Mark the stud centers.
3. Modèl Perçage Pozisyon: Tape the included drilling template to the wall, aligning it with your marked stud centers. Use a level to ensure it is perfectly horizontal.
4. Fè twou pilòt: Drill pilot holes through the template at the marked locations.
5. Plak miray an sekirite: Attach the wall plate of the mount to the wall using the provided lag bolts and washers. If your studs are 24" apart, attach the extension brackets to the wall plate first, then secure the entire assembly to the wall.
6. Pandye televizyon: Carefully lift your TV and hook the TV brackets onto the wall plate.
7. Televizyon an sekirite: Tighten the security screws on the TV brackets to lock the TV onto the mount.
8. Jere Kab yo: Route your TV cables through the integrated cable management channels on the mount arms and secure them with the included cable clips.
9. Ajiste ak Nivo: Make any final adjustments to the TV's position, including lateral shift and post-installation leveling, to achieve your desired viewang ang.

Video Installation Guide:

5. Operasyon Enstriksyon

Once installed, your ECHOGEAR EGLF324 mount allows for easy adjustment of your TV's position.

• Ekstansyon: Gently pull the TV screen forward to extend the mount up to 19 inches from the wall.
• Swivel: Carefully push or pull the sides of the TV screen to swivel it left or right, up to 140 degrees.
• Enklinezon: To adjust the tilt angle (up to 15 degrees), loosen the tilt adjustment knobs on the TV brackets, set the desired angle, and then re-tighten the knobs securely.
• Lateral Shift: For minor horizontal adjustments after installation, the TV can be slid left or right by up to 5.4 inches on the wall plate.
• Nivelman: The mount allows for ±3 degrees of post-installation leveling. Consult the manual for specific instructions on how to adjust this feature.

6. Antretyen

Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan sipò televizyon ou an.

• Tèks Peryodik: Periodically check that all screws and connections are secure. Re-tighten if necessary.
• Netwayaj: Netwaye montaj la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
• Lubrifikasyon: Moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact support.

NAN. Depanaj

If you encounter issues during installation or use, refer to the following common solutions.

• Televizyon Pa Nivo: Use the post-installation leveling feature (±3 degrees) to correct the TV's horizontal alignment. Ensure the wall plate itself was installed level.
• Difficulty Moving TV: Check for any obstructions or overtightened bolts. Ensure cables are not snagged.
• Mòn nan santi l lach: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into the center of the wood studs.
• Pati ki manke: Refer to the package contents list. Contact ECHOGEAR customer support for replacement parts.

8. Espesifikasyon

9. Garanti ak sipò

ECHOGEAR stands by its products. For warranty information, technical assistance, or to report missing/damaged parts, please contact ECHOGEAR customer support.

Enfòmasyon pou kontakte: Refer to the ECHOGEAR official website or the product packaging for the most current contact details.