1. Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of the YANZEO SR692 UHF RFID Reader. The SR692 is an integrated UHF RFID reader designed for long-range identification applications, featuring a 9dBi antenna and various network output options. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Enfòmasyon sou Sekirite
- Asire ekipman pou pouvwa a voltage koresponn ak egzijans aparèy la.
- Pa ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa anviwònman koroziv.
- Avoid direct exposure to the antenna during operation, as it emits radio frequency energy.
- Pa eseye demonte oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
- The device is rated IP67 for dust and water resistance, but avoid submerging it in water.
3. Pake kontni
Verifye ke tout atik ki nan lis anba a yo prezan nan pakè ou a:
- YANZEO SR692 UHF RFID Reader Unit
- Adaptè pouvwa
- Mounting Sipò ak Materyèl
- RS232/RS485 Cable
- RJ45 Network Cable (may vary)
Figure 3.1: YANZEO SR692 UHF RFID Reader with its accessories and indicated dimensions (26cm x 26cm x 3.2cm). The image shows the main reader unit, power adapter, mounting hardware, and various cables including RS232/RS485 and RJ45 connectors.
4. Enstalasyon ak Enstalasyon
4.1 Enstalasyon Fizik
- Montaj: Use the provided mounting bracket and hardware to securely attach the SR692 reader to a stable surface. Ensure the antenna side faces the desired reading area.
- Koneksyon pouvwa: Connect the power adapter to the reader's power input port and then plug it into a suitable power outlet.
- Koneksyon rezo (RJ45): For network communication, connect an Ethernet cable from the reader's RJ45 port to your network switch or router.
- Serial Connection (RS232/RS485): If using serial communication, connect the appropriate cable to the reader's serial port and your host device.
- Wiegand Connection: For Wiegand output, connect the Wiegand interface to your access control system.
Figi 4.1: Dèyè view of the YANZEO SR692 reader, illustrating the various cable connections including power, RJ45, and serial ports.
4.2 lojisyèl konte genyen
After physical installation, the reader typically requires software configuration for optimal performance and integration with your system. This may involve setting IP addresses, communication parameters (baud rate for serial), and specific RFID tag reading modes. Refer to the accompanying software development kit (SDK) or configuration utility for detailed instructions on software setup.
5. Operasyon Enstriksyon
5.1 Operasyon debaz
Once powered on and configured, the SR692 reader continuously emits a UHF radio frequency field. When an RFID tag compatible with the supported protocols (ISO18000-6C/EPC Gen2, ISO18000-6B) enters this field, the reader will detect the tag and read its unique identification data. This data is then transmitted via the configured interface (RJ45, RS232, RS485, or Wiegand) to the connected host system.
5.2 Reading Distance and Performance
The SR692 is designed for long-range reading, with an effective reading distance of up to 9 meters (approximately 30 feet) under ideal conditions. Factors affecting reading performance include:
- Tag Kalite: Passive UHF RFID tags.
- Tag Oryantasyon: Optimal reading occurs when the tag is oriented correctly relative to the antenna.
- Entèferans Anviwònman: Metal objects, liquids, and other RF devices can affect performance.
- Plasman antèn: Proper positioning of the integrated 9dBi antenna is crucial for maximizing read range and coverage.
Figi 5.1: Devan view of the YANZEO SR692 UHF RFID Reader, showing its robust casing and integrated antenna design.
6. Antretyen
- Netwayaj: Use a soft, dry cloth to clean the exterior of the reader. Do not use abrasive cleaners or solvents.
- Kondisyon anviwònman: While the device has an IP67 rating, it is recommended to install it in a location that minimizes direct exposure to harsh weather conditions or extreme temperatures to prolong its lifespan.
- Enspeksyon kab: Periodically inspect all connected cables for signs of wear or damage. Replace damaged cables immediately.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Reader not powering on. | Pa gen ekipman pou kouran; adaptè kouran ki defektye; koneksyon ki lach. | Check power outlet; ensure power adapter is securely connected; test with a known good power adapter if available. |
| Pa ka li tags. | Tag out of range; incorrect tag type; environmental interference; incorrect software configuration. | Deplase tag closer to the reader; ensure tags are UHF RFID; check for metal objects or other RF sources; verify software settings. |
| Pwoblèm koneksyon rezo. | Incorrect IP address; faulty Ethernet cable; network configuration problem. | Verify IP settings; check Ethernet cable; consult network administrator. |
| Enkonsistan tag li. | Tag orientation; multiple tags in field; interference. | Ajiste tag orientation; manage tag density; reduce environmental interference. |
8. Espesifikasyon
- Modèl: SR692
- Mak: Yanzeo
- Pwotokòl Sipò pou: ISO18000-6C/EPC Gen2, ISO18000-6B
- frekans travay: 860-960MHz (wide band)
- Antèn: Integrated 9dBi
- Lekti Distans: Jiska 9 mèt (apeprè 30 pye)
- Entèfas: RJ45 (Network), RS232, RS485, Wiegand
- Evalyasyon Pwoteksyon Ingress (IP): IP67
- Dimansyon: Approximately 26cm x 26cm x 3.2cm (15.43 x 10.67 x 2.99 inches)
- Pwa: Apeprè 1.56 kg (3.44 liv)
- Entèfas pyès ki nan konpitè: USB
- Pousantaj transfè done: 5000 Megabit pou chak segonn
9. Garanti ak sipò
For warranty information and technical support, please contact your point of purchase or visit the official Yanzeo websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.
Yanzeo Store: https://www.amazon.com/stores/Yanzeo/page/47DF12D1-A192-426D-99DE-03F0F94ED170
