Entwodiksyon
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your EVGA GeForce RTX 3090 FTW3 Ultra Gaming graphics card. This high-performance graphics card is designed for demanding applications, offering advanced features such as 24GB GDDR6X memory, iCX3 Technology for enhanced cooling, and customizable ARGB LED lighting.
Figi 1: Devan view of the EVGA GeForce RTX 3090 FTW3 Ultra Gaming Graphics Card.
Karakteristik kle
- Teknoloji iCX3: Advanced cooling solution with triple HDB fans and 9 iCX3 thermal sensors for optimized performance and reduced acoustic noise.
- Adjustable ARGB LED: Customizable lighting for aesthetic integration into your system.
- All-Metal Backplate: Pre-installed for structural rigidity and additional cooling.
- 24GB GDDR6X Memory: High-speed memory for demanding graphics tasks and gaming.
- Real-Time Ray Tracing: Enhanced graphics realism in supported games.
- PCI Express Gen 4: High-bandwidth interface for optimal data transfer.
- Rezolisyon maksimòm dijital: Supports up to 7680 x 4320.
Figi 2: Plis paseview of iCX3 Interactive Cooling.
Figure 3: Detailed explanation of iCX3 Technology features.
Enstalasyon
1. Kondisyon sistèm
Anvan enstalasyon an, asire w ke sistèm ou an satisfè kondisyon minimòm sa yo:
- PCI Express-compliant motherboard with one x16 graphics slot.
- Minimum 750W power supply with three available 8-pin PCIe power connectors. A 1200W PSU or higher is recommended for optimal performance and stability, especially under heavy load.
- Sufficient space within your PC case for a triple-slot graphics card (dimensions: 15.1 x 12 x 5 inches). Consider a GPU support bracket due to the card's weight (approximately 4.65 pounds).
- Operating system: Windows 10 64-bit or later.
2. Enstalasyon Fizik
- Prepare sistèm ou an: Power off your computer and unplug all cables. Open your PC case.
- Locate PCIe slot: Idantifye yon plas PCI Express x16 ki disponib sou kat manman ou an.
- Install the card: Carefully align the graphics card with the PCIe slot and press down firmly until it is securely seated. Ensure the retention clip locks into place.
- Mete kat la an sekirite: Use screws to fasten the graphics card to the PC case at the rear I/O panel.
- Konekte pouvwa: Connect three 8-pin PCIe power cables from your power supply to the corresponding ports on the graphics card. Ensure all connections are firm.
- Install support bracket (recommended): Due to the card's size and weight, installing a GPU support bracket is highly recommended to prevent sag and potential damage to the PCIe slot.
Figure 4: Display output ports (DisplayPort and HDMI) and exhaust vents.
Figi 5: Egzample of a GPU support bracket for installation.
3. Enstalasyon Chofè ak Lojisyèl
- Pouvwa sou: Close your PC case, reconnect all cables, and power on your computer.
- Install NVIDIA drivers: Download the latest NVIDIA GeForce drivers for the RTX 3090 from the official NVIDIA website. Follow the on-screen instructions for a clean installation.
- Enstale EVGA Precision X1 la: Download and install EVGA Precision X1 software from the official EVGA website. This utility allows for monitoring, overclocking, and customizing the ARGB lighting and fan curves of your graphics card.
Opere
Once installed and drivers are updated, your EVGA GeForce RTX 3090 FTW3 Ultra Gaming graphics card is ready for use. It will automatically handle graphics processing for your applications and games.
ARGB LED Customization
The graphics card features adjustable ARGB LED lighting. You can customize the lighting effects, colors, and patterns using the EVGA Precision X1 software. This allows you to synchronize the card's lighting with other ARGB components in your system.
Figure 6: Graphics card with ARGB LEDs illuminated.
Figi 7: Angle view of the graphics card with ARGB LEDs illuminated.
Antretyen
1. Netwayaj
Regular cleaning helps maintain optimal performance and longevity. Periodically, with the system powered off and unplugged:
- Use compressed air to remove dust from the fans, heatsink fins, and other components of the graphics card.
- Wipe the exterior surfaces with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
2. Fan Curve Adjustment
The EVGA GeForce RTX 3090 FTW3 Ultra Gaming features advanced cooling. However, for users seeking to optimize thermal performance or reduce noise, adjusting the fan curve is recommended. The default fan curve may allow temperatures to reach up to 90°C before maximum fan speeds are engaged. Using EVGA Precision X1, you can create a more aggressive fan curve to maintain lower operating temperatures (e.g., mid-70s °C) under load, which can contribute to better long-term stability and performance.
3. Jesyon tèmik
Ensure adequate airflow within your PC case. Proper case ventilation, including intake and exhaust fans, is crucial for dissipating heat generated by high-performance components like the RTX 3090. Insufficient airflow can lead to higher operating temperatures for the GPU and its memory modules, potentially affecting performance and lifespan.
Depanaj
If you encounter issues with your graphics card, consider the following troubleshooting steps:
- Pa gen ekspozisyon/ekran nwa:
- Asire w kat grafik la byen chita nan plas PCIe a.
- Verify that all three 8-pin PCIe power connectors are securely attached to the card and the power supply.
- Check that your monitor cable is connected to the graphics card's output ports, not the motherboard's integrated graphics ports.
- Si sa posib, fè yon tès ak yon lòt kab ekran oswa monitè.
- Enstabilite/Pwoblèm Sistèm:
- Asire w ke inite ekipman pouvwa ou a (PSU) satisfè rekòmandasyon wat yo.tage (minimum 750W, 1200W or higher recommended for stability under load). Insufficient power can cause instability.
- Update your graphics drivers to the latest version. Perform a clean installation if issues persist.
- Monitor GPU temperatures using EVGA Precision X1 or similar software. High temperatures can lead to throttling or crashes. Improve case airflow if temperatures are consistently high.
- Fan Noise/Overheating:
- Clean dust from the fans and heatsink.
- Adjust the fan curve in EVGA Precision X1 for more aggressive cooling.
- Ensure proper case airflow. Consider adding or repositioning case fans.
- Note that the card can generate significant heat under load, and effective case cooling is essential.
- ARGB LED Issues:
- Ensure EVGA Precision X1 software is installed and running.
- Check for software updates for EVGA Precision X1.
Pou plis asistans, gade sipò EVGA a. websit la oubyen kontakte sipò teknik yo.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 24G-P5-3987-KR |
| Koprosesè grafik | NVIDIA GeForce RTX 3090 |
| memwa | 24 GB GDDR6X |
| Vitès memwa | 19500 MHz Effective |
| Ranfòse revèy | 1800 MHz |
| Digital Max Rezolisyon | 7680 x 4320 |
| Kalite otobis | PCIe 4.0 |
| Entèfas Sorti Videyo | DisplayPort, HDMI |
| Dimansyon atik (LxWxH) | 15.1 x 12 x 5 pous |
| Pwa atik | 4.65 liv |
| Konektè pouvwa | 3x PCIe 8-pin |
| Teknoloji refwadisman | iCX3 Technology with Triple HDB Fans |
| Karakteristik adisyonèl | Adjustable ARGB LED, All-Metal Backplate, Built for EVGA Precision X1 |
Garanti ak sipò
EVGA products are typically covered by a manufacturer's warranty. For specific warranty terms, registration, and support, please visit the official EVGA websit la. Kenbe prèv acha ou pou reklamasyon garanti.
For technical assistance, driver downloads, and software updates, refer to the EVGA support portal. You can also find FAQs and community forums for common issues and solutions.
