Artemide Cadmo LED Wall Lamp (Model 1373028A) User Manual

1. Entwodiksyon

This manual provides detailed instructions for the safe and efficient use of your Artemide Cadmo LED Wall Lamp, Model 1373028A. Please read this manual thoroughly before installation and operation, and retain it for future reference. This product is designed for indoor use only.

Enfòmasyon enpòtan sou sekirite: Always disconnect power before installation, maintenance, or bulb replacement. Installation should be performed by a qualified electrician in accordance with local electrical codes.

2. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Artemide Cadmo LED Wall Lamp aparèy
• Materyèl pou monte (vis, lank miray)
• Manyèl Enstriksyon (dokiman sa a)
• Note: GU10 LED bulbs are not included and must be purchased separately.

3. Spécifications pwodwi

4. Enstalasyon ak Enstalasyon

Anvan ou kòmanse: Ensure the power supply to the installation area is turned off at the circuit breaker. Consult a qualified electrician if you are unsure about any steps.

4.1 Zouti obligatwa

• Tournevis (Phillips ak/oswa Flathead)
• Denude Fil
• Tep elektrik
• Drill (if wall anchors are needed)
• Kreyon
• Nivo

4.2 Monte aparèy la

1. Etenn pouvwa: Locate the circuit breaker controlling the light switch for the installation area and turn it off. Verify power is off using a voltage tèsteur.
2. Prepare Sifas Montage: Mark the desired mounting location on the wall. Ensure it is structurally sound and can support the fixture's weight.
3. Enstale Support Mounting: Attach the fixture's mounting bracket to the wall using the provided screws and wall anchors (if necessary). Use a level to ensure it is straight.
4. Koneksyon elektrik: Carefully connect the electrical wires from the wall to the fixture's wires.
   • Connect the live (black) wire from the wall to the live wire of the fixture.
   • Connect the neutral (white) wire from the wall to the neutral wire of the fixture.
   • Connect the ground (green or bare copper) wire from the wall to the ground wire of the fixture.
   Tache tout koneksyon ak nwa fil ak tep elektrik.
5. Aparèy sekirite: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched.

4.3 Installing GU10 LED Bulbs

The Artemide Cadmo lamp requires two GU10 LED bulbs (not included). Ensure the bulbs are rated for 120V and do not exceed 10W each.

1. Gently insert the GU10 bulb into the socket.
2. Twist the bulb clockwise until it is securely seated in the socket.
3. Repeat for the second bulb.

Figure 1: Artemide Cadmo LED Wall Lamp enstale, montreasing its upward and downward light emission.

5. Operasyon Enstriksyon

After successful installation and bulb insertion, you can operate your Artemide Cadmo LED Wall Lamp.

5.1 Limen/Etenyen

Restore power at the circuit breaker. Use the wall switch connected to the fixture to turn the lamp sou oswa koupe.

5.2 Fonksyonalite gradyasyon

This fixture supports 2-wire dimming. If connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is suitable for LED lighting.

L laamp is also compatible with App and Remote Control methods for dimming, provided the appropriate smart home system and GU10 smart bulbs are used.

6. Swen ak Antretyen

Regular maintenance ensures the longevity and optimal performance of your Artemide Cadmo LED Wall Lamp.

6.1 Netwayaj

• Toujou etenn kouran an to the fixture before cleaning.
• Siye sifas ekstèn yo ak yon twal mou, sèk, oswa yon ti kras mouye.amp twal.
• Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Asire w ke aparèy la sèk nèt anvan ou retabli kouran an.

6.2 Ranplasman anpoul

When a GU10 LED bulb reaches the end of its life:

1. Fèmen pouvwa nan disjoncteurs a.
2. Allow the bulb to cool completely if it was recently in use.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert a new GU10 LED bulb (max 10W) by aligning the pins and twisting clockwise until secure.
5. Retabli pouvwa nan disjoncteurs a.

Figi 2: Pwofesyonèl bò kotefile of the Artemide Cadmo LED Wall Lamp, illustrating its sleek design.

NAN. Depanaj

If you encounter issues with your Artemide Cadmo LED Wall Lamp, gade pwoblèm ak solisyon komen sa yo:

If these steps do not resolve the issue, please contact Artemide customer support or a qualified electrician.

8. Garanti ak sipò

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or visit the official Artemide websit. Tèm ak kondisyon garanti yo ka varye selon rejyon an ak détayan an.

For technical support, replacement parts, or further assistance, please contact Artemide customer service directly. Contact information can typically be found on the manufacturer's websit oswa anbalaj pwodwi a.

Ofisyèl Artemide Websit: www.artemide.com