Manyèl Itilizatè SilverStone Technology SUGO 14 (SST-SG14B)
Mini-ITX Cube Chassis
1. Entwodiksyon
The SilverStone Technology SUGO 14 (SST-SG14B) is a compact Mini-ITX cube chassis designed for high-performance computing in small form factor builds. It features a modular design with four removable panels, offering excellent flexibility for component installation and cooling configurations. This manual provides detailed instructions for setting up, operating, and maintaining your SUGO 14 chassis.
Pwodwi souview Videyo
Video 1: SUGO 14 & SUGO 15 brief introduction. This video provides an overview of the SilverStone SUGO 14 and SUGO 15 chassis, detailing their shared internal structure and differences in exterior design and front I/O ports. It also demonstrates the modularity and component compatibility of the chassis.
2. Gid Enstalasyon
Follow these steps to assemble your system within the SUGO 14 chassis.
2.1 Unpacking and Panel Removal
Carefully remove the chassis from its packaging. The SUGO 14 features four removable panels (top, left, right, and bottom) for easy access during installation. These panels are secured with thumb screws for tool-less removal.
2.2 Enstalasyon mèr
The SUGO 14 is compatible with Mini-DTX and Mini-ITX motherboards. Install your motherboard onto the designated standoffs inside the chassis. Ensure all necessary cables are routed before securing the motherboard.
2.3 Enstalasyon Power Supply Unit (PSU).
The chassis supports ATX PSUs. The power supply is installed from the side, allowing its cables to be routed away from other components for better cable management and airflow.
2.4 Enstalasyon Kat Grafik
The SUGO 14 supports full-length graphics cards up to 3 slots wide, with an adjustable graphics card holder for stability. Install your graphics card into the PCIe slot on your motherboard.
2.5 Enstalasyon Sistèm Refwadisman
The chassis supports up to 240mm radiators for liquid cooling solutions or various air coolers. Multiple fan mounting options are available for optimal airflow.
2.6 Enstalasyon Aparèy Depo
The SUGO 14 offers different configurations to support various storage components, including 5.25", 3.5", and 2.5" drives. The front panel features a hidden 5.25" drive bay.
3. Operasyon Enstriksyon
3.1 Limen/Etenyen
Locate the power button on the front panel of the chassis. Press it once to power on your system. To power off, either shut down through your operating system or press and hold the power button for several seconds.
3.2 Pò Antre/Sòti Devan
The front panel provides convenient access to USB ports and audio jacks for connecting peripherals.
- Pò USB 3.0: Two (2) ports for high-speed data transfer.
- USB 2.0 pò: One (1) port for standard USB devices.
- Pak odyo: Jack kas ekoutè ak mikwofòn.
4. Antretyen
Regular maintenance helps ensure optimal performance and longevity of your SUGO 14 chassis.
4.1 Netwayaj
- Eksteryè: Sèvi ak yon mou, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners.
- Filtè Pousyè: The chassis features magnetic dust filters on the side panels. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
4.2 Enspeksyon Entèn
Periodically open the side panels to inspect for dust accumulation on internal components and fans. Use compressed air to gently remove dust from heatsinks, fan blades, and other areas.
NAN. Depanaj
This section addresses common issues you might encounter with your SUGO 14 chassis.
5.1 Sistèm nan pa limen
- Asire w ke kab kouran an byen konekte ak tou de PSU a ak priz miray la.
- Verify that the PSU switch is in the 'ON' position.
- Check all internal power connections, especially the 24-pin ATX and 8-pin CPU power cables to the motherboard.
- Confirm that the front panel power switch cable is correctly connected to the motherboard's front panel header.
5.2 Overheating Issues
- Ensure all case fans are properly installed and spinning.
- Clean any dust buildup on dust filters, fans, and heatsinks.
- Verify proper airflow direction within the chassis (intake/exhaust).
- Check CPU cooler and GPU cooler for proper seating and thermal paste application.
5.3 Component Fitment Issues
- Refer to the specifications section for maximum component dimensions (GPU length, CPU cooler height, PSU length).
- For large GPUs, ensure the adjustable graphics card holder is correctly positioned.
- Utilize the modular panels for easier access during installation of larger components.
6. Espesifikasyon
Detailed specifications for the SilverStone SUGO 14 (SST-SG14B) chassis:
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | SilverStone |
| Non modèl | SST-SG14B |
| Nimewo Modèl Atik | Sugo 14 |
| Dimansyon pwodwi (LxWxH) | 14.49 x 9.72 x 8.46 pous |
| Pwa atik | 10.78 liv |
| Koulè | Nwa |
| Materyèl | Alloy Steel |
| Mèr konpatibilite | Mini ITX |
| Kalite Ka | Full Tower (Note: This is a classification from the source data, but the chassis is a Mini-ITX cube.) |
| Kalite montaj ekipman pouvwa | Anba mòn |
| Metòd refwadisman | Fanatik |
| Kantite USB 3.0 pò | 2 |
| Kantite USB 2.0 pò | 1 |
| Sipò GPU | 3-slot full length graphics cards |
| Sipò pou radyatè | Jiska 240mm |
| Panno detachable | 4 (top, left, right, bottom) |
| Sipò pou Depo | 5.25", 3.5", 2.5" (various configurations) |
7. Garanti ak sipò
For warranty information and technical support, please refer to the official SilverStone Technology websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.
- Sipò sou entènèt: Vizite la SilverStone Teknoloji websit for FAQs, drivers, and support resources.
- Kontakte: Gade seksyon kontak la sou paj ofisyèl la. websit la pou plis detay sou sipò rejyonal la.
