Manyèl Enstriksyon pou Kontè a Distans EPEVER MT50

1. Entwodiksyon

The EPEVER MT50 Remote Meter is designed for monitoring and setting parameters of compatible EPEVER solar charge controllers. It provides real-time operational data, working status, and alarm information through its large LCD screen, enhancing user control and system management.

2. Enfòmasyon sou Sekirite

Please read this manual carefully before installation and operation. Keep it in a safe place for future reference. Improper installation or use may result in damage to the device or connected equipment.

• Ensure all power connections are disconnected before installing or removing the MT50 meter.
• Connect the MT50 only to compatible EPEVER solar charge controllers as specified.
• Evite ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite.
• Do not attempt to disassemble or repair the MT50 meter yourself. Contact qualified personnel for service.

3. Pake kontni

Verifye ke tout atik yo enkli nan pakè ou a:

• EPEVER MT50 Remote Meter
• Communication Cable (RJ45)
• Vis ak bouchon pou monte
• Manyèl Enstriksyon

4. Pwodwi souview

The MT50 remote meter features a large LCD display and intuitive navigation buttons for easy interaction with your EPEVER solar charge controller.

4.1. Karakteristik kle

• Konpatibilite: Designed for EPEVER LS-B(P), VS-BN, Tracer-BN, Tracer-A(N), eTracer, and iTracer series controllers.
• Siveyans an tan reyèl: Displays operational data and working status in digital, graphic, and textual forms.
• Idantifikasyon otomatik: Automatically identifies the connected controller model and relevant parameter data.
• Fonksyon alam: Provides real-time failure information and alarms.
• Entèfas itilizatè-zanmitay: Six navigation function keys for direct and rapid operation.
• Pwovizyon pou pouvwa: Powered directly via the communication cable from the controller, no external power needed.
• Seleksyon Kalite batri: Supports Gel, Sealed, Flooded, and User-defined (programmable) battery types.
• Mòd kontwòl chaj: Offers Manual, Light On/Off, Light On+Timer, and Time Control load modes.

4.2. Front and Back View

5. Enstalasyon ak Enstalasyon

Follow these steps to properly install and connect your EPEVER MT50 Remote Meter to a compatible solar charge controller.

5.1. Mounting the MT50

1. Choose a suitable location for the MT50 meter, ensuring it is easily accessible and visible.
2. Use the provided mounting screws to secure the meter to a flat surface.
3. Ensure the communication cable can reach the solar charge controller without excessive tension.

5.2. Connecting to the Solar Charge Controller

The MT50 connects to the solar charge controller via an RJ45 communication cable. This cable supplies power to the MT50 and facilitates data exchange.

1. Locate the RS485 communication port on your EPEVER solar charge controller.
2. Connect one end of the RJ45 communication cable to the MT50's RS485 port.
3. Connect the other end of the RJ45 communication cable to the RS485 port on your solar charge controller.
4. Once connected, the MT50 display should power on and show real-time data from the controller.

6. Operasyon Enstriksyon

The MT50 provides various screens for monitoring and parameter settings. Use the navigation buttons (Esc, Up, Down, Left, Right, OK) to navigate through the menus and adjust settings.

6.1. Done Siveyans

The main display shows real-time data such as solar panel voltage/current, battery voltage/current, and load voltage/current. Use the navigation buttons to scroll through different monitoring screens.

6.2. Anviwònman Paramèt

To enter the setting interface, press and hold the "OK" button for 1 second. You can then navigate through various parameters such as battery type, battery capacity, voltage control parameters, and load control modes.

• Seleksyon Kalite batri: Choose between Gel, Sealed, Flooded, or User-defined. For User-defined, you can set specific voltage paramèt.
• Mòd kontwòl chaj: Select from Manual, Light On/Off, Light On+Timer, or Time Control to manage your load output.

7. Antretyen

The EPEVER MT50 Remote Meter requires minimal maintenance. Regular checks can ensure optimal performance and longevity.

• Keep the display screen clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Periodically check the communication cable for any signs of damage or loose connections.
• Ensure the meter is securely mounted and not exposed to excessive vibrations.

NAN. Depanaj

If you encounter issues with your MT50 Remote Meter, refer to the following common problems and solutions:

9. Espesifikasyon

10. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your EPEVER solar charge controller or visit the official EPEVER websit la. Kenbe resi acha ou kòm prèv acha.