Manyèl Itilizatè Crankset PRAXIS Cadet M30 DM 32T

Entwodiksyon

This manual provides essential information for the installation, operation, and maintenance of your PRAXIS Cadet M30 DM 32T Aluminium Crankset. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

The PRAXIS Cadet M30 DM 32T is an aluminium crankset designed for mountain bikes. It features a direct mount (DM) interface for a 32-tooth chainring (chainring sold separately) and requires a Praxis M30 bottom bracket for compatibility.

Pwodwi souview

Image: The PRAXIS Cadet M30 DM crankset, showing both crank arms. The left crank arm features the M30 spindle, while the right crank arm is designed for direct mount chainrings.

Key features of the PRAXIS Cadet M30 DM 32T Crankset include:

• Aluminium construction for durability and light weight.
• Direct Mount (DM) interface compatible with SRAM 3-bolt chainrings (chainring sold separately).
• Designed for use with Praxis M30 bottom brackets (sold separately).
• Total item weight approximately 558g (crankset only).

Enstalasyon ak Enstalasyon

Proper installation is crucial for the performance and safety of your crankset. If you are unsure about any steps, it is recommended to seek assistance from a qualified bicycle mechanic.

Zouti obligatwa (pa enkli):

• Kle koupl
• Hex keys (various sizes, typically 8mm for crank bolt)
• Bottom bracket tool compatible with Praxis M30 bottom brackets
• Grès
• Thread locker (optional, for chainring bolts)

Etap enstalasyon:

1. Prepare sipò anba a: Ensure your Praxis M30 bottom bracket is correctly installed and torqued to the manufacturer's specifications in your bicycle frame. Apply a thin layer of grease to the spindle bore of the bottom bracket.
2. Enstale chèn an: Attach your direct mount chainring (SRAM 3-bolt compatible) to the right crank arm. Ensure the chainring is oriented correctly. Torque the chainring bolts to the manufacturer's recommended specifications.
3. Install Right Crank Arm: Carefully slide the right crank arm (with chainring attached) through the drive-side bearing of the bottom bracket.
4. Install Left Crank Arm: Align the splines of the left crank arm with the splines on the spindle extending from the bottom bracket. Push the left crank arm onto the spindle.
5. Tighten Crank Bolt: Insert the main crank bolt into the left crank arm. Using a torque wrench, tighten the crank bolt to the specified torque. Refer to the Praxis M30 bottom bracket instructions for the exact torque value, typically around 40-50 Nm (30-37 ft-lbs). Overtightening or undertightening can cause damage or unsafe operation.
6. Tcheke pou Jwe: After tightening, check for any lateral play in the crankset. The crank arms should spin freely without any side-to-side movement.

Enstriksyon Operasyon

The PRAXIS Cadet M30 DM 32T crankset is designed for standard bicycle operation. Once installed, ensure all components are secure before riding.

• Tèks regilye: Before each ride, quickly check that the crank arms are securely attached and there is no excessive play.
• Chainring Compatibility: Ensure your chainring is compatible with your bicycle's drivetrain (e.g., 1x, 10-speed, 11-speed, 12-speed).
• Kondisyon monte: This crankset is designed for mountain biking. Avoid using it in conditions or for activities beyond its intended design, such as extreme downhill racing without proper additional components.

Antretyen

Regular maintenance will extend the life of your crankset and ensure optimal performance.

• Netwayaj: Clean the crankset regularly with mild soap and water, especially after riding in dirty or wet conditions. Avoid high-pressure washing directly on bearings.
• Enspeksyon: Periodically inspect the crank arms for any signs of damage, cracks, or bending. Check the chainring teeth for wear.
• Koupl boulon: Re-check the torque of the main crank bolt and chainring bolts periodically (e.g., every 100-200 km or after a few hard rides). Loose bolts can lead to damage or failure.
• Bracket anba: The Praxis M30 bottom bracket should be serviced according to its own manual. This typically involves cleaning and re-greasing bearings or replacement if worn.
• Lubrifikasyon: While the crankset itself doesn't require lubrication, ensure your chain and chainring are properly lubricated according to your chain manufacturer's recommendations.

Depanaj

Si pwoblèm yo pèsiste apre ou fin eseye solisyon sa yo, konsilte yon mekanisyen bisiklèt pwofesyonèl.

Espesifikasyon

Garanti ak sipò

For warranty information and support, please refer to the official Praxis Cycles websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.

Manifakti: PRAXIS

Dat premye disponib: 4 jiyè 2023