Edge Car Audio 12 Inch Active Subwoofer EDB12A User Manual

1. Entwodiksyon

Thank you for choosing the Edge Car Audio 12 Inch Active Subwoofer EDB12A. This active subwoofer enclosure is designed to deliver powerful and clear bass, enhancing your in-car audio experience. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new subwoofer.

Figi 1: Devan ak bò view of the Edge Car Audio 12 Inch Active Subwoofer EDB12A.

2. Enfòmasyon sou Sekirite

Tanpri li tout enstriksyon sekirite yo ak anpil atansyon anvan enstalasyon ak itilizasyon. Si ou pa swiv direktiv sa yo, ou ka blese oswa domaje pwodwi a oswa machin nan.

• Always disconnect the vehicle's battery negative terminal before beginning any electrical work.
• Asire w ke tout fil elektrik yo byen izole epi byen sere pou anpeche kous kout ak domaj.
• Do not install the subwoofer in a location where it may obstruct the driver's view oswa entèfere ak operasyon machin.
• Evite ekspoze aparèy la nan imidite, tanperati ekstrèm, oswa limyè solèy dirèk.
• Use fuses of the correct rating as specified in the wiring diagram.
• Seek professional installation if you are unsure about any part of the process.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• Subwoofer aktif
• Manyèl itilizatè
• Hi Level Speaker adapter cable

4. Pwodwi Features

The Edge Car Audio EDB12A Active Subwoofer boasts the following key features:

• 12" Subwoofer for deep bass reproduction.
• 400 Watts RMS power output.
• 1200 Watts Peak power output.
• Entegre amplifier for an all-in-one solution.
• Compatible with both factory-fitted and aftermarket stereos.
• Built-in Bass Boost functionality.
• Includes Hi-Level Speaker input adapter for easy connection to OEM head units.

5. Enstalasyon ak Enstalasyon

Proper installation is crucial for optimal performance and safety. It is recommended to have this unit installed by a qualified car audio professional.

5.1. Chwazi yon kote pou monte

Consider the dimensions of the subwoofer for placement. Common locations include the vehicle's trunk or luggage compartment. Ensure adequate ventilation around the ampseksyon lifier.

Figure 2: Subwoofer dimensions for planning installation space.

Figure 3: Detailed line drawing with height and depth measurements (413mm x 338mm).

5.2. Koneksyon fil elektrik

The EDB12A features an integrated amplifier, simplifying wiring. Refer to the rear panel image for connection points.

Figure 4: Rear panel with power, ground, remote, and audio input connections.

1. Pouvwa (12V): Connect a fused power cable directly from the vehicle's positive battery terminal to the +12V terminal on the subwoofer. Ensure the fuse is located close to the battery.
2. Tè (GND): Connect a short, heavy-gauge cable from the GND terminal to a clean, unpainted metal point on the vehicle's chassis.
3. Kontwòl a distans (REM): Connect a remote turn-on wire from your head unit's remote output to the REM terminal. This will turn the subwoofer on/off with your stereo. If your head unit does not have a remote output, the high-level input can often provide automatic turn-on.
4. Antre odyo:
   • RCA Input (Low Level): If your head unit has RCA pre-outs, connect them to the RCA input jacks on the subwoofer.
   • High-Level Speaker Input: If your head unit does not have RCA outputs, use the supplied Hi-Level Speaker adapter cable. Connect the speaker wires from your head unit (or factory speaker wires) to the corresponding inputs on the adapter, then plug the adapter into the subwoofer's high-level input port.

6. Operasyon Enstriksyon

Once installed, you can adjust the subwoofer's settings for optimal sound performance.

• Akeri kontwòl: Sa a ajiste sansiblite antre a nan amplifier. Start with the gain at minimum and slowly increase it until the bass blends well with your main speakers without distortion.
• Low Pass Filter (LPF): This control sets the upper frequency limit for the subwoofer. Frequencies above this setting will be filtered out. A common starting point is 80-100 Hz, but adjust to blend seamlessly with your vehicle's main speakers.
• Bass ranfòse: This feature provides an increase in bass output at a specific frequency. Use sparingly to avoid distortion and potential damage to the subwoofer.
• Chanjman Faz: If available, this switch (0°/180°) helps align the subwoofer's output with your main speakers. Listen to both settings and choose the one that provides the most impactful and cohesive bass.

7. Antretyen

Regular maintenance will help ensure the longevity and performance of your subwoofer.

• Netwayaj: Use a soft, dry cloth to wipe down the enclosure. Do not use harsh chemicals or abrasive cleaners.
• Enspeksyon: Periodically check all wiring connections to ensure they are secure and free from corrosion. Inspect the subwoofer cone for any signs of damage.
• Vantilasyon: Asire w la amplifier's heatsink is free from dust and debris to allow for proper cooling.

NAN. Depanaj

Si w gen pwoblèm ak subwoofer ou a, gade pwoblèm ak solisyon komen sa yo:

9. Espesifikasyon

Detailed technical specifications for the Edge Car Audio EDB12A Active Subwoofer:

10. Garanti ak sipò

This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official EDGE website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or the manufacturer's customer service department.

Pou plis enfòmasyon, ou ka vizite EDGE Store on Amazon.