Intex 58414EP

Intex Pineapple Baby Pool Instruction Manual

Modèl: 58414EP

1. Pwodwi souview

The Intex Pineapple Baby Pool is designed for young children aged 1 to 3 years. It features a built-in sunshade for partial protection from sunlight and a soft inflatable floor for comfort. The pool has an approximate water capacity of 12 gallons (45 liters) with a 5-inch wall height. Inflated dimensions are approximately 40 inches (102 cm) long by 37 inches (94 cm) wide.

Intex Pineapple Baby Pool with dimensions and features

Imaj 1: Plis paseview of the Intex Pineapple Baby Pool, highlighting its soft inflatable floor and recommended age range of 1-3 years. Approximate inflated size is 39in x 37in (99cm x 94cm).

2. Enfòmasyon sou Sekirite

WARNING: ADULT SUPERVISION REQUIRED AT ALL TIMES.

This is not a life-saving device. Children can drown in very small amounts of water. Empty the pool when not in use. Do not install the paddling pool over concrete, asphalt, or any other hard surface. Keep children within arm's reach. See product for additional warnings and safety labels.

3. Enstriksyon Enstalasyon

  1. Chwazi yon kote: Select a level, soft surface (such as grass) for setting up the pool. Ensure there are no sharp objects or debris that could puncture the pool. Avoid concrete, asphalt, or other hard surfaces.
  2. Depliye pisin lan: Retire pisin lan nan anbalaj li avèk prekosyon epi dewoule l nèt sou sifas ou te chwazi a.
  3. Inflate the Pool: The pool has multiple air chambers. Locate the inflation valves for the main ring, the soft inflatable floor, and the built-in sunshade. Use an air pump (not included) to inflate each chamber until it is firm to the touch but not over-inflated. Ensure all valves are securely closed after inflation.
  4. Ranpli ak dlo: Once fully inflated, fill the pool with water to the recommended level, which is approximately 5 inches (13 cm) of wall height, or 12 gallons (45 liters). Do not overfill.

Video 1: Demonstration of the Intex Pineapple Baby Pool, showing its inflatable bottom and separate inflation points for the main ring and sunshade. This video provides a visual guide to the setup process.

Intex Pineapple Baby Pool with child and features

Image 2: The Intex Pineapple Baby Pool in use, illustrating the built-in sunshade for partial protection and the soft inflatable floor. It also mentions the approximate water capacity of 12 gallons (45L) and the importance of setting up on level ground.

4. Operasyon Enstriksyon

Once the pool is set up and filled, children can enjoy splashing and playing. The built-in sunshade offers partial protection from direct sunlight. Always ensure an adult is actively supervising children in and around the pool.

Video 2: A demonstration of the Intex Pineapple Baby Pool, highlighting its bright colors, shallow depth suitable for babies to sit and splash, and the protective sunshade feature.

5. Antretyen

  • Netwayaj: Regularly clean the pool with mild soap and water. Rinse thoroughly. Do not use abrasive cleaners or brushes.
  • Drenaj: To drain the pool, open the drain valve (if present) or carefully tip the pool to empty the water.
  • Siye: Ensure the pool is completely dry before deflating and storing to prevent mold and mildew.
  • Depo: Deflate all air chambers, fold the pool neatly, and store it in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from sharp objects.

NAN. Depanaj

  • Slow Deflation: If the pool slowly deflates, check all inflation valves to ensure they are securely closed. Inspect the pool surface for small punctures. A repair patch is typically included with the product for minor repairs.
  • Uneven Inflation: Ensure all air chambers are inflated evenly. If one section appears softer, add more air to that specific chamber.
  • Flit dlo: Check for visible tears or holes. Use the provided repair patch according to its instructions to seal any leaks.

7. Espesifikasyon

KarakteristikDetay
MakIntex
Nimewo Modèl58414EP
Dimansyon pwodwi (gonfle)40"L x 37"W x 5"H (102cm x 94cm x 13cm)
MateryèlPlastik
Kapasite12 Gallons (45 Liters) at 5in wall height
Laj (Rekòmande)12 mwa - 3 an
Karakteristik espesyalInflatable, Built-in Sunshade, Soft Inflatable Floor
Pwa atik3.5 liv (1.59 kilogram)
Konpozan ki enkliPisinn, Patch Reparasyon

8. Garanti ak sipò

For warranty information or product support, please refer to the documentation included with your purchase or contact Intex customer service directly. Specific warranty details are not provided in this manual.

Dokiman ki gen rapò - 58414EP

Preview Manyèl Itilizatè Intex Frame Pool Set Family - Modèl 260x160x65cm ak Lòt
Manyèl itilizatè konplè pou modèl Intex Frame Pool Set Family yo, ki gen ladan enstriksyon enstalasyon, gid antretyen, konsèy depanaj, ak enfòmasyon sou garanti pou yon itilizasyon pisin ki an sekirite epi agreyab.
Preview Manyèl Pwopriyetè Pisinn INTEX Easy Set: Gid Enstalasyon, Sekirite ak Antretyen
Manyèl konplè pou pwopriyetè pisin INTEX Easy Set (modèl 6' - 18'). Gen ladan règ sekirite esansyèl, enstriksyon enstalasyon, konsèy antretyen, depanaj, ak enfòmasyon sou garanti pou yon itilizasyon pisin ki an sekirite epi agreyab.
Preview Manyèl Pwopriyetè ak Gid Enstalasyon Netwayaj Pisin Oto Intex la
Manyèl konplè pou pwopriyetè a pou netwayaj pisin otomatik Intex la. Gen ladan l enstriksyon enstalasyon, referans pyès, gid netwayaj, konsèy depanaj, ak enfòmasyon sekirite pou antretyen netwayaj pisin ou an.
Preview Pisinn Intex Prism Frame Oval 503x274x122 cm - Modèl 55213 | Enfòmasyon sou pwodwi ak sekirite
Jwenn detay esansyèl sou pwodwi a ak avètisman sekirite pou pisin Intex Prism Frame Oval la (Modèl 55213). Gen ladan dimansyon, kapasite, akseswa ki enkli yo, kontak manifakti a, ak gid enpòtan pou itilizasyon.
Preview Manyèl pwopriyetè aparèy chofaj pisin elektrik Intex HT30221-2
Manyèl pwopriyetè sa a bay règ sekirite esansyèl, enstriksyon enstalasyon, pwosedi operasyon, gid depanaj, ak enfòmasyon sou garanti pou Chofaj Pisinn Elektrik Intex HT30221-2 la. Aprann kijan pou enstale, opere, epi kenbe chofaj pisinn ou an sekirite pou yon pèfòmans optimal.
Preview Manyèl Pwopriyetè INTEX: Ponp Elektrik Fast-Fill™ Entegre Modèl AP619A
Manyèl konplè pou pwopriyetè ponp elektrik INTEX Built-in Fast-Fill™ modèl AP619A a, ki bay enstriksyon sekirite esansyèl, pwosedi operasyon pou gonfle ak degonfe, nòt enpòtan sou antretyen matla gonflab, ak gid depo. Aprann kijan pou byen itilize epi kenbe ponp matla gonflab INTEX ou a.