ErGear Laptop and Monitor Arm (Model EGCM16) User Manual

1. Entwodiksyon

Thank you for choosing the ErGear Laptop and Monitor Arm, Model EGCM16. This product is designed to enhance your workspace by providing a versatile and ergonomic solution for mounting your laptop or monitor. It allows for flexible positioning, helping to reduce strain and improve productivity. Please read this manual carefully before installation and use to ensure proper setup and operation.

Figure 1: ErGear Laptop and Monitor Arm (Model EGCM16) with laptop tray and clamp monte.

Karakteristik pwodwi:

• Doub konpatibilite: Supports laptops up to 15.6 inches (max 10kg) and monitors from 13 to 27 inches (max 10kg) with VESA 75x75mm or 100x100mm patterns.
• Ergonomi reglabl: Offers height, tilt, swivel, and rotation adjustments for optimal viewang ing.
• Konsepsyon pou ekonomize espas: Elevates your device, freeing up valuable desk space.
• De opsyon pou monte: Gen ladan tou de C-clamp and grommet mounting hardware for versatile installation.
• Jesyon kab entegre: Keeps your workspace tidy by routing cables along the arm.

2. Enfòmasyon sou Sekirite

Tanpri obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan pwodwi a:

• Do not exceed the maximum weight capacity of 10kg (22 lbs) for either laptop or monitor.
• Ensure the mounting surface (desk) is stable and strong enough to support the combined weight of the arm and your device.
• Tighten all screws securely during installation. Loose connections can cause instability.
• Kenbe timoun ak bèt kay lwen zòn enstalasyon an.
• Do not attempt to disassemble or modify the product. Contact customer support if you encounter issues.
• Exercise caution when adjusting the arm to avoid pinching fingers or damaging devices.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Pòl prensipal
• Bra Swivel
• Plato Laptop
• C-Clamp Asanble
• Grommet Mount Assembly
• VESA Plak
• Klip kab
• Twous pyès ki nan konpitè (vis, rondelles, kle Allen)
• Manyèl itilizatè

4. Enstalasyon ak Enstalasyon

This arm supports two installation methods: C-clamp ak Grommet mount. Chwazi metòd ki apwopriye pou biwo ou.

Figure 2: Illustration of C-clamp ak opsyon pou monte Grommet.

4.1 Desk Compatibility

• C-Clamp: Compatible with desk thickness from 10mm to 78mm.
• Montur Grommet: Compatible with desk thickness from 10mm to 60mm. Requires a pre-drilled hole in the desk.

Figure 3: Product dimensions and compatible desk thickness for mounting.

4.2 C-Clamp Enstalasyon

1. Tache C-cl laamp assembly to the bottom of the main pole.
2. Position the main pole on your desk edge.
3. Sere boulon C-cl laamp screw until the pole is securely fastened to the desk.

4.3 Grommet Mount Installation

1. Demonte C-cl laamp from the main pole and attach the grommet mount assembly.
2. Insert the main pole through the pre-drilled hole in your desk.
3. Secure the grommet plate and tighten the nut from underneath the desk until the pole is stable.

4.4 Attaching the Arm and Device

1. Slide the swivel arm onto the main pole at your desired height and secure it with the provided collar and screw.
2. Pou Laptop: Attach the laptop tray to the end of the swivel arm. Place your laptop on the tray.
3. Pou monitè kè bebe: Remove the laptop tray. Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure your monitor is VESA 75x75mm or 100x100mm compatible.

Figure 4: VESA mounting patterns (75x75mm and 100x100mm) for monitor installation.

Figure 5: Compatibility for laptops up to 17 inches and monitors from 15-32 inches, both up to 10kg.

4. Slide the monitor (with VESA plate attached) onto the end of the swivel arm.
5. Asire w ke tout koneksyon yo sere epi an sekirite.

5. Operasyon ak Ajisteman

The ErGear arm offers multiple adjustment points to customize your vieweksperyans nan.

Figure 6: Demonstrates the tilt (±90°), swivel (±90°), and 360° rotation capabilities of the arm.

5.1 Ajisteman Wotè

To adjust the height of your device, loosen the collar on the main pole, slide the arm to the desired height, and then re-tighten the collar securely.

Figure 7: The arm allows for vertical height adjustment along the main pole.

5.2 Enklinasyon, Pivote, ak Wotasyon

• Enklinezon: The laptop tray or monitor can be tilted up or down by ±90 degrees to reduce glare and find a comfortable viewing angle. Adjust the tilt mechanism on the arm.
• Swivel: The arm can swivel left or right by ±90 degrees, allowing you to share your screen or adjust your position.
• Wotasyon: The VESA plate (for monitors) allows for 360-degree rotation, enabling portrait or landscape orientation.

5.3 Jesyon kab

Utilize the integrated cable clips along the arm to route your power and data cables. This helps maintain a clean and organized workspace.

Figure 8: Cables can be neatly routed along the arm using the integrated clips.

5.4 Ventilation Design

The laptop tray features a perforated design to promote airflow and prevent your laptop from overheating during extended use.

Figure 9: The laptop tray's ventilated surface helps dissipate heat from your device.

5.5 Benefis ergonomik

Proper adjustment of the arm can significantly improve your posture and reduce discomfort. Position your screen so that the top of the display is at or slightly below eye level, and your arms are comfortable when typing.

Figure 10: Illustrates how proper arm adjustment can lead to a more comfortable and ergonomic desk setup.

6. Antretyen

Regular maintenance ensures the longevity and optimal performance of your ErGear arm.

• Netwayaj: Wipe the arm and tray with a soft, damp twal. Evite pwodui netwayaj abrazif oswa solvan.
• Verifikasyon sere: Tcheke tout vis ak koneksyon yo detanzantan pou asire yo rete sere. Sere yo ankò si sa nesesè.
• Lubrifikasyon: No lubrication is typically required for this product.

NAN. Depanaj

Si ou rankontre nenpòt pwoblèm, gade pwoblèm ak solisyon komen sa yo:

• Arm is unstable/wobbly:
  • Asire w ke C-cl laamp or grommet mount is securely tightened to the desk.
  • Verify that the swivel arm is properly secured to the main pole.
  • Check that the laptop tray or VESA plate is firmly attached to the arm.
• Device is too heavy/arm sags:
  • Confirm that your device's weight does not exceed the 10kg (22 lbs) capacity.
  • Ensure all adjustment points are tightened sufficiently to hold the weight.
• Difficulty adjusting arm:
  • Loosen the relevant screws slightly before attempting to adjust, then re-tighten.
  • Do not force adjustments.
• Cables are not neat:
  • Re-route cables through the provided cable clips.
  • Ensure cables have enough slack for full arm movement.

If problems persist, please contact ErGear customer support.

8. Espesifikasyon

9. Garanti ak sipò

ErGear products are manufactured with quality and reliability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or the ErGear official websit la pou tèm ak dire garanti espesifik yo.

For technical assistance, troubleshooting, or warranty claims, please contact ErGear customer support through the retailer where you purchased the product or visit the official ErGear websit pou enfòmasyon kontak.