RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The RS PRO RSDS 1052 DL+ is a versatile 2-channel digital storage oscilloscope with a 50 MHz bandwidth, designed for precise signal analysis. It features a 7-inch TFT LCD display for clear waveform visualization and supports various measurement parameters and mathematical operations.

2. Enfòmasyon sou Sekirite

Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the instrument.

• Sous pouvwa: Asire w ke osiloskop la konekte ak yon sous kouran ki nan vòltaj espesifye a.tagranje e (100-240V AC, 50/60Hz).
• Atè: The instrument must be properly grounded to prevent electric shock. Do not defeat the grounding plug.
• Anviwònman: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
• Sondaj: Use only probes supplied or recommended by RS PRO. Ensure probes are correctly rated for the voltage ke yo te mezire.
• Antretyen: Konfere tout sèvis bay pèsonèl sèvis kalifye. Pa eseye louvri enstriman an.asing unless explicitly instructed.
• Kategori sekirite: This device is rated CAT I, CAT II. Observe all safety warnings on the device and in this manual.

3. Pwodwi souview ak Konpozan

Seksyon sa a bay yon souview of the RS PRO RSDS 1052 DL+ oscilloscope and its main components.

Figi 3.1: Devan View of the Oscilloscope. This image shows the front panel of the RS PRO RSDS 1052 DL+ oscilloscope, highlighting the 7-inch TFT LCD display, control knobs, function buttons, and input connectors for channels 1 and 2. The screen displays a typical waveform and FFT analysis.

Figi 3.2: Angle View of the Oscilloscope. This image provides an angled perspective of the RS PRO RSDS 1052 DL+ oscilloscope, showcasing its compact design and integrated handle for portability. The side ventilation grilles are also visible.

Figi 3.3: Dèyè View of the Oscilloscope. This image displays the rear panel of the RS PRO RSDS 1052 DL+ oscilloscope, featuring the power input, USB device port, USB host port, LAN port, and Pass/Fail output. Safety warnings and product labels are also visible.

Figure 3.4: Oscilloscope Probe and Accessories. This image shows a passive oscilloscope probe (1:1/10:1) along with various accessories, including colored rings for channel identification and probe tip covers. These are essential for connecting signals to the oscilloscope.

Figure 3.5: Power Plugs and Probe Tip. This image displays an assortment of power plugs (EU, UK, US types) that may be included with the oscilloscope, along with a specialized probe tip. These ensure compatibility with various power outlets and provide versatility for measurements.

3.1 Pwodwi pou Enkli

The RS PRO RSDS 1052 DL+ typically includes the following accessories:

• Passive Probe 1:1/10:1 (x2)
• USB kab
• Gid Quick Start
• Sètifika Kalite
• Power Cord (region-specific)
• CD (including User Manual and EasyScopeX software)

4. Enstalasyon

4.1 Debalaj ak enspeksyon

1. Carefully remove the oscilloscope and all accessories from the packaging.
2. Inspect the instrument for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
3. Verify that all included accessories listed in Section 3.1 are present.

4.2 Koneksyon pouvwa

1. Ensure the power switch on the rear panel is in the OFF position.
2. Connect the provided power cord to the AC input on the rear panel of the oscilloscope.
3. Plug the other end of the power cord into a grounded AC power outlet. The oscilloscope supports 100-240V AC, 50/60Hz.

4.3 Probe Connection and Compensation

1. Connect the BNC connector of the passive probe to one of the input channels (CH1 or CH2) on the front panel.
2. Attach the probe tip to the probe compensation output (usually a square wave test signal) on the front panel.
3. Adjust the compensation trimmer on the probe until the displayed square wave is flat-topped, without overshoot or undershoot. This ensures accurate measurements.

5. Operasyon Enstriksyon

5.1 Operasyon debaz

• Limen/Etenyen: Press the power button on the front panel to turn the oscilloscope on or off.
• Enstalasyon oto: Peze a Oto button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
• Kontwòl vètikal: Sèvi ak la VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the POZISYON knob to move the waveform vertically.
• Kontwòl orizontal: Sèvi ak la SEC/DIV knob to adjust the horizontal scale (time per division) and the POZISYON knob to move the waveform horizontally.
• Kontwòl deklanchè: Ajiste a NIVO knob to set the trigger threshold. The trigger ensures a stable display of repetitive waveforms.

5.2 Fonksyon avanse

• Fonksyon Mezi: Peze a Mezire button to access automatic measurement parameters such as Vpp, Vmax, Vmin, Freq, Period, etc.
• Fonksyon matematik: Peze a Matematik button to perform mathematical operations on waveforms (e.g., Add, Subtract, Multiply, Divide, FFT).
• Storage and Recall: Sèvi ak la Sove / Rapèl buttons to save waveform data, setups, or screenshots to internal memory or a USB drive.
• Koneksyon USB: Connect a USB drive to the front panel USB host port for data storage. Use the rear USB device port to connect the oscilloscope to a PC for data transfer and control via EasyScopeX software.

6. Antretyen

6.1 Netwayaj

• Dekonekte fil elektrik la anvan w netwaye.
• Sèvi ak yon mou, damp cloth with mild detergent to clean the exterior of the instrument.
• Do not use abrasive cleaners or solvents that may damage the plastic parts.
• Ensure no liquid enters the instrument.

6.2 Kalibrasyon

The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified personnel is recommended, typically every 12-24 months, depending on usage and environmental conditions.

6.3 Depo

When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, away from extreme temperatures and humidity.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen ou ka rankontre.

If the problem persists after attempting these solutions, please contact RS PRO customer support.

8. Espesifikasyon

Key technical specifications for the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope:

• Chanèl analòg: 2
• Oscilloscope Type: Depo dijital
• Bandwidth: 50 MHz
• An tan reyèl Sampto: Up to 500 MSa/s
• Pwofondè memwa: 32 Kpts
• Kalite ekspozisyon: TFT LCD
• Gwosè ekspozisyon: 7 inches (800 x 480 pixels)
• Vertical Sensitivity: 2mV/div to 10V/div
• Entèval Baz Tan: 10ns/div pou 50s/div
• Pwovizyon pou pouvwa: Mains operated (100-240V AC, 50/60Hz)
• Pwa: 2.5 kg
• Kategori sekirite: CAT I, CAT II
• Entèfas: RS232, USB Host, USB Device, LAN

9. Garanti ak sipò

RS PRO products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official RS PRO websit la pou wè tèm ak kondisyon garanti detaye yo.

For technical support, service, or inquiries regarding your RS PRO RSDS 1052 DL+ oscilloscope, please contact RS PRO customer service through their official channels. Contact information can usually be found on the RS PRO website or in the documentation provided with the product.

RS PRO Official Websit: https://uk.rs-online.com/web/