1. Entwodiksyon
Klein Tools CL120 Digital Cl laamp Meter is an automatically ranging digital clamp-meter designed for professional and DIY electrical tasks. It measures AC current and Non-Contact Voltage (NCVT) via the clamp, ak AC/DC voltage, resistance, and continuity via test-leads. This manual provides essential information for safe and effective operation of your CL120 Digital Clamp Mèt.
2. Enfòmasyon sou Sekirite
WARNING: Risk of electric shock or personal injury.
- Toujou mete pwoteksyon pou je apwouve.
- Pa itilize si mèt la oswa fil tès yo parèt domaje.
- Pa sèvi ak li sou sikui ki depase vòltaj espesifye a.tage ak evalyasyon aktyèl yo.
- Ensure the meter is turned OFF before connecting or disconnecting test leads.
- Use caution when working with live circuits.
- Refer to local and national safety codes.
3. Pake kontni
- CL120 Digital CLamp Mèt
- Ka pote
- Fil tès ak bouchon sekirite CAT III/CAT IV
- 3 x AAA pil
- Manyèl Enstriksyon
4. Pwodwi Features
- Versatile Clamp Mèt: Measures AC current and NCVT via clamp; AC/DC voltage, resistance, and continuity via test-leads.
- Ki pa Peye-Kontakte Voltage Tès: Entegre nan cl laamp jaw for convenient electrical testing.
- Ekspozisyon retroeklere: LCD shows clear readings in low-light conditions for enhanced visibility.
- Mezi egzat: Auto-ranging technology selects the appropriate measurement range for accurate results.
- Karakteristik pratik: Test lead holder on the side of the clamp pou operasyon men lib.
- Karakteristik adisyonèl: Max, Data Hold capability for enhanced functionality and auto-power off after 10 minutes to conserve battery life.
5. Enstalasyon
5.1 Enstalasyon batri
- Asire w ke mèt la etenn.
- Using a Phillips head screwdriver, loosen the screw on the battery compartment cover located on the back of the meter.
- Remove the cover and insert 3 AAA batteries, observing correct polarity.
- Ranplase kouvèti lòj batri a epi sere boulon vis la.
5.2 Koneksyon Plon Tès la
Connect the red test lead to the VΩmA input jack and the black test lead to the COM input jack for voltage, rezistans, ak mezi kontinwite.
6. Operasyon Enstriksyon
6.1 Power On/Off
Rotate the function dial from the OFF position to any desired measurement function to power on the meter. Rotate the dial back to OFF to power off.
6.2 Mezi Kouran AC (Clamp)
- Rotate the function dial to the 2/20A~ or 200/400A~ position.
- Louvri cl laamp machwè a lè w peze deklanche a.
- Mete cl laamp jaw around a single conductor (not a power cord with multiple wires) to measure AC current.
- Li valè aktyèl la sou ekran an.
6.3 AC/DC VoltagMezi (Plon Tès)
- Rotate the function dial to the V~ (AC Voltage) oubyen V- (Volim DCtage) pozisyon.
- Connect the test leads to the circuit points you wish to measure.
- Li voltage valè sou ekspozisyon an.
6.4 Mezi Rezistans ak Kontinuite
- Rotate the function dial to the Ω (Resistance) or Continuity position.
- Connect the test leads across the component or circuit to be measured.
- For continuity, the meter will beep if a continuous path is detected. For resistance, read the value on the display.
6.5 Voltage (NCV) Deteksyon
Press the NCV button and hold the meter's tip near a live AC voltage source. The meter will emit an audible beep and the NCV indicator light will illuminate if AC voltage detekte.
6.6 Backlight and Data Hold/Max Functions
- Ekleraj: Press the backlight button to illuminate the display for better visibility in low-light conditions.
- Done kenbe: Peze bouton HOLD la pou bloke lekti aktyèl la sou ekran an. Peze ankò pou lage li.
- MAX: Press the MAX button to capture the maximum reading during a measurement.
7. Antretyen
7.1 Netwayaj
Siye mèt la avèk yon twal sèk ki pa gen pousyè. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
7.2 Ranplasman batri
Replace batteries when the low battery indicator appears on the display. Refer to section 5.1 for battery installation instructions.
NAN. Depanaj
- Kontè a pa limen: Tcheke enstalasyon pil yo epi asire w pil yo pa fin itilize.
- Lekti ki pa egzak: Ensure test leads are properly connected and the correct function is selected. Verify the circuit is within the meter's specified range.
- Pa gen bip kontinwite: Ensure the circuit is de-energized and the component is not open.
9. Espesifikasyon
| Spesifikasyon | Valè |
|---|---|
| Mak | Zouti KLEIN |
| Nimewo Modèl | CL120 |
| Sous pouvwa | Mache ak pil (3 x AAA enkli) |
| AC Range Kouran | 400 Amp |
| AC / DC Voltage Range | Jiska 600 vòlt |
| Ranje Rezistans | Jiska 20 MΩ |
| Kontinwite | Wi |
| Ki pa Peye-Kontakte Voltage (NCV) | Wi |
| Retroeklere ekspozisyon | Wi |
| Auto-Sòti | Wi |
| Data Hold / Max | Wi |
| Rating sekirite | CAT III 600V |
| Pwa atik | 9.8 ons (0.61 Liv) |
| Dimansyon pwodwi (L x W x H) | 8.45 x 3.51 x 1.51 pous |
10. Videyo pwodwi ofisyèl yo
Video 1: A comprehensive review nan Klein Tools CL120 Digital Cl laamp Meter, demonstrating its features and practical applications, including use with a line splitter.
Video 2: An informational video covering essential aspects and functionalities of the Klein Tools Clamp Mèt.
Video 3: A showcase of Klein Tools Digital Clamp Meters, highlighting their robust design and various measurement capabilities.
Video 4: A comparison between the Klein Tools CL120 and CL390 clamp meters, helping users decide which model best suits their needs.
Videyo 5: Yon revizyon detayeview assessing the value and performance of the Klein Tools CL120 Digital Clamp Mèt.
Video 6: A demonstration of the Klein Digital Clamp Meter in various electrical testing scenarios.
11. Garanti ak sipò
Klein Tools products are manufactured to high standards of quality and durability. For warranty information, product registration, or technical support, please visit the official Klein Tools websit la oubyen kontakte sèvis kliyan yo. Kenbe resi acha w la pou reklamasyon garanti.
For further assistance, please refer to the contact information provided on the official Klein Tools websit: www.kleintools.com
