Manyèl Itilizatè Adaptè Plug-In Ring (2yèm Jenerasyon) pou Sonèt Pòt

1. Entwodiksyon

This manual provides essential instructions for the installation, operation, and maintenance of your Ring Plug-In Adapter (2nd Generation). This adapter is designed to provide continuous power to compatible Ring Battery Doorbells, eliminating the need for frequent battery recharging and enabling 24/7 power and protection without existing doorbell wiring.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installing and using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• This adapter is designed for itilize andedan kay la sèlman. Do not expose it to water, moisture, or extreme temperatures.
• Connect the adapter only to standard indoor power outlets (100-240V AC, 50/60Hz).
• The adapter includes built-in short circuit protection. However, ensure proper wiring connections to prevent damage to the device or doorbell.
• Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
• Kenbe soti nan atenn timoun yo.

3. Pake kontni

• Ring Plug-In Adapter (2nd Generation)
• 10-foot cable with fork connectors

4. Enstalasyon ak Enstalasyon

Follow these steps to install your Ring Plug-In Adapter:

1. Prepare Your Doorbell: Ensure your compatible Ring Battery Doorbell has its rechargeable Quick Release Battery Pack inserted. The adapter will keep this battery charged.
2. Connect the Adapter Cable: Locate the two terminal screws on the back of your Ring Doorbell. Connect the fork connectors of the adapter's 10-foot cable to these screws. It does not matter which wire (red or black) connects to which terminal, as long as they do not touch each other. Tighten the screws to secure the connections.
   

   Figi 1: Devan view of the Ring Plug-In Adapter (2nd Generation). This image shows the compact white adapter unit with the Ring logo on the side and the power cable extending from the bottom.
3. Wout kab la: Carefully route the 10-foot cable from your doorbell to a standard indoor power outlet. Ensure the cable is not pinched or damaged, especially if passing through door frames or walls. Use the included clips to secure the cable if needed.
4. Ploge nan pouvwa: Plug the Ring Plug-In Adapter into a standard indoor electrical outlet.
   

   Figi 2: Retounen view of the Ring Plug-In Adapter (2nd Generation) with its electrical specifications label. The label details the model number, input/output power, and regulatory marks.

5. Verifye Koneksyon: Your Ring Doorbell should power on, and the Ring app should indicate a "Hardwired" status in the Device Health section. If the doorbell's light changes to a permanent white color, it indicates a successful power connection.

5. Operasyon

Once installed, the Ring Plug-In Adapter provides continuous power to your compatible Ring Battery Doorbell. This means your doorbell will remain powered without requiring you to remove the battery for recharging.

The adapter utilizes a trickle charge mechanism. This means it will slowly and continuously recharge the battery. It is normal for the battery percentage in the Ring app to fluctuate or drop slightly (e.g., to 90%) before the adapter initiates a recharge cycle. This behavior is designed to prolong the overall lifespan of your doorbell's battery.

6. Konpatibilite

The Ring Plug-In Adapter (2nd Generation) is compatible with the following Ring Doorbell models:

• Videyo Sonèt branche
• Video Doorbell (1st Generation)
• Video Doorbell (2nd Generation - 2020 Release)
• Videyo Sonèt 2
• Videyo Sonèt 3
• Videyo Doorbell 3 Plus
• Videyo Sonèt 4
• Sonèt batri
• Batri Sonèt Plus
• Videyo Sonèt Pro
• Videyo Doorbell Pro 2

Pa konpatib ak:

• Peephole Cam
• Videyo Sonèt Elit

NAN. Depanaj

• Doorbell not showing "Hardwired" in app: During the initial setup tutorial, the doorbell might not immediately recognize the hardwired power source. If this occurs, proceed with the setup. Once the doorbell is fully set up, check the "Device Health" section in the Ring app; it should then correctly display "Hardwired."
• Pousan batritage dropping: As explained in the Operation section, the adapter uses a trickle charge. It is normal for the battery percentage to drop to around 90% before the adapter recharges it back to full. This is a protective measure for battery longevity.
• No power to doorbell:
  • Ensure the adapter is securely plugged into a working indoor outlet.
  • Verify that the cable connections to the doorbell terminals are secure and not loose.
  • Check for any visible damage to the cable or adapter.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or further assistance, please visit the official Ring support websit entènèt la oubyen kontakte sèvis kliyan Ring lan. Anjeneral, ou ka jwenn plis detay sou sit Ring lan. website or within your Ring app.

Ou ka vizite tou Ring Store on Amazon pou plis enfòmasyon ak resous pwodwi yo.