Entwodiksyon
This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.
Figi 1: Devan view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.
Karakteristik pwodwi
- Simple & Hassle-Free Operation: Designed for ease of use.
- Easy-Set Dual Alarms: Program two separate alarm times.
- Gentle Ascending Alarm: Volim alam ogmante piti piti.
- Batri Backup: Maintains settings during power outages (requires 2x AA batteries, sold separately).
- Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.
Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.
Enstriksyon Enstalasyon
1. Koneksyon pouvwa
Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.
2. Enstalasyon sovgad batri
For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.
Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.
Enstriksyon Operasyon
1. Mete Tan an
- Peze epi kenbe la TAN button. The time display will begin to flash.
- Pandan w ap kenbe a TAN bouton, peze a LÈ bouton pou ajiste lè a. Obsève endikatè PM a pou w ka byen ajiste lè AM/PM nan.
- Pandan ke yo toujou kenbe la TAN bouton, peze a MINIT bouton pou ajiste minit yo.
- Lage a TAN bouton yo mete tan an.
2. Setting the Alarm (Dual Alarm)
This clock supports two independent alarms (AL1 and AL2).
- Glise a ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
- Peze epi kenbe la ALAM button. The alarm time display will begin to flash.
- Pandan w ap kenbe a ALAM bouton, peze a LÈ button to adjust the alarm hour. Observe the PM indicator.
- Pandan ke yo toujou kenbe la ALAM bouton, peze a MINIT bouton pou ajiste minit alam lan.
- Lage a ALAM button to set the alarm time.
- To activate the alarm, ensure the ALARM ON / OFF switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
- To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).
Figi 4: Plis paseview of the control buttons on the top of the alarm clock for setting time and alarms.
3. Sèvi ak Fonksyon Snooze a
Lè alam lan sonnen, peze gwo bouton an SNOOZE button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.
4. Turning Off the Alarm
Pou etenn alam lan nèt, glise bouton an ALARM ON / OFF switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.
5. Ascending Alarm Volume
The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.
Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.
Antretyen
- Netwaye revèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
- Evite ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite ki wo.
- Replace backup batteries annually to ensure reliable performance.
Depanaj
| Pwoblèm | Solisyon |
|---|---|
| Ekspozisyon an vid. | Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings. |
| Alam lan pa sonnen. | Tcheke si la ALARM ON / OFF switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate. |
| Paramèt lè/alam yo pèdi apre kouran an koupe.tage. | Ensure fresh AA batteries are installed correctly in the battery backup compartment. |
| Clock feels hot. | Unplug the clock immediately and discontinue use. Contact customer support. |
| Alarm is too quiet/loud. | The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment. |
| Incorrect voltage warning (UK/Gulf regions). | This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk. |
Espesifikasyon
- Mak: Sharp
- Modèl: SPC387
- Koulè: Black - Red LED
- Kalite ekspozisyon: Dijital dirije
- Dimansyon pwodwi: 5.5" lajè x 2.1" wotè
- Sous pouvwa: Electrical (AC) with Battery Backup (2x AA batteries, not included)
- Materyèl: Plastik
- Pwa atik: 8.8 ons
- Karakteristik espesyal: Dual Alarm, Ascending Alarm Volume, Snooze Function
Garanti ak sipò
This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp websit.
For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.
Manifakti: SHARP
