iBeam Micro Camera Black Fixed Angle User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Enfòmasyon sou Sekirite

• Toujou dekonekte batri machin nan anvan ou kòmanse nenpòt enstalasyon elektrik.
• Asire w ke tout fil elektrik yo byen izole epi byen sere pou anpeche kous kout oswa domaj.
• Pa bloke wout chofè a view or interfere with vehicle controls during installation.
• Konsilte yon enstalatè pwofesyonèl si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an.
• This product is intended as an aid and should not replace safe driving practices.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Câblage lekipay
• Manyèl Enstriksyon (dokiman sa a)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Pwodwi souview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Imaj: Yon gwo plan view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Karakteristik kle:

• Konsepsyon kontra enfòmèl ant: Small footprint for discreet installation.
• Rezistan dlo: IP68 klase pou pèfòmans serye nan divès kondisyon metewolojik.
• Capteur imaj: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view oswa devan view).
• Montaj: Features an 8MM threaded bolt for secure mounting.

5. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your iBeam Micro Camera:

1. Chwazi Kote Montaj: Chwazi yon kote ki bay yon vizibilite san obstak view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Prepare Sifas Montage: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Monte kamera a: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Koneksyon fil elektrik:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Fonksyonalite tès: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Sekirize fil elektrik: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Operasyon Enstriksyon

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Oryantasyon Imaj: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Antretyen

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Netwayaj: Netwaye lantiy kamera a detanzantan avèk yon twal mou,amp twal pou retire pousyè tè, pousyè tè, oswa tach dlo ki ka bouche view. Do not use abrasive cleaners.
• Enspeksyon: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Evite lave anba presyon: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

NAN. Depanaj

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Espesifikasyon

10. Garanti ak sipò

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.

Manifakti: Kòporasyon Elektwonik Metra