Entwodiksyon
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics Outdoor Wall Lantern with Integrated LED and Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.
Enfòmasyon sou Sekirite
AVÈTISMAN: Risk pou chòk elektrik.
- Always turn off the power at the circuit breaker or fuse box before installation, servicing, or changing any part of the fixture.
- Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
- Ensure all electrical connections are made according to local codes and ordinances.
- Pa eseye modifye aparèy la. Nenpòt modifikasyon ka anile garanti a epi kreye yon danje pou sekirite.
- This fixture is designed for outdoor use. Ensure proper sealing against moisture.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an.
- Outdoor Wall Lantern with Integrated LED
- Mounting Bracket
- Montaj Vis
- Fil nwa
- Manyèl Enstriksyon
Image: The outdoor wall lantern shown with its mounting bracket, screws, and wire nuts.
Enstalasyon ak Enstalasyon
- Prepare pou enstalasyon: Turn off power at the main circuit breaker. Ensure the power is off before proceeding.
- Retire ansyen enstalasyon an (si sa aplikab): Dekonekte epi retire tout aparèy limyè ki egziste deja avèk anpil atansyon.
- Atache Sipò Montaj la: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
- Fè koneksyon elektrik:
- Konekte a nwa fil soti nan aparèy la rive nan la nwa fil (cho) ki soti nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
- Konekte a blan fil soti nan aparèy la rive nan la blan fil (net) ki nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
- Konekte a tè fil soti nan aparèy la rive nan la tè wire from the junction box (or to the green ground screw on the mounting bracket) using a wire nut.
Asire w tout koneksyon yo byen fèm epi pa gen okenn fil ki pa kouvri.
- Monte aparèy la: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure a tight seal against the wall to prevent moisture intrusion.
- Retabli pouvwa: Retounen kouran nan disjoncteurs a.
Imaj: Devan view of the installed outdoor wall lantern, showing its design and integrated LED.
Imaj: Bò kote view of the outdoor wall lantern, highlighting its upward-facing design and motion sensor at the base.
Enstriksyon Operasyon
This outdoor wall lantern features an integrated motion sensor for automatic illumination.
Fonksyonalite Capteur Mouvman
- The motion sensor has a 120-degree detection angle and an 8-meter range.
- The light will activate when motion is detected within its range, typically at dusk or in low-light conditions.
- The duration the light stays on after motion detection can often be adjusted. Refer to the sensor's specific controls, usually small dials or switches located on the sensor itself, for time and sensitivity settings.
Imaj: Yon gwo plan view of the motion sensor located at the base of the lantern, showing its dome-shaped lens.
Adjusting Sensor Settings
The motion sensor typically has adjustable settings for sensitivity (how easily it detects motion) and time (how long the light stays on after detection). These adjustments are usually made via small dials on the sensor unit. Use a small screwdriver to carefully turn these dials to your desired settings.
Image: The outdoor wall lantern installed on a dark garage wall, providing illumination to the area below.
Antretyen
- Netwayaj: Netwaye aparèy la ak yon mou, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or plastic components.
- Dirije entegre: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need replacement.
- Enspeksyon: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Limyè rete limen kontinyèlman. |
|
|
| Limyè a flache oubyen li tranble. |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | G10021P-NA |
| Dimansyon (L x W x H) | 11.5" x 8.7" x 6.3" |
| Sous pouvwa | AC 120V |
| Wattage | 11W (Integrated LED) |
| Koulè limyè | Blan Cho (3000 Kelvin) |
| Materyèl | Aluminum (Fixture), Plastic (Shade) |
| Fini | Nwa |
| Mouvman Sensor Range | 120 degrees / 8 meters |
| Itilizasyon Andedan kay la / Deyò | Deyò |
Garanti
This Amazon Basics Outdoor Wall Lantern is covered by a 3-ane garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from accident, misuse, abuse, improper installation, or unauthorized repair.
Pou reklamasyon garanti, tanpri konsève prèv acha ou epi kontakte sèvis kliyan.
Sipò pou Kliyan
For technical assistance, troubleshooting, or warranty inquiries, please visit the Amazon Basics support page or contact Amazon customer service directly.
Sipò sou entènèt: Magazen Amazon Basics
