Lepro LED Strip Light Instruction Manual

1. Pwodwi souview

The Lepro LED Strip Light is a versatile and dimmable lighting solution designed for various indoor applications. This 32.8-foot strip features 600 high-brightness 2835 LEDs, providing 6000K Daylight White illumination. It comes with a dimmer for convenient brightness adjustment and utilizes strong 3M adhesive for easy installation. The strip is durable, environmentally friendly, and operates at a safe 24V, ensuring low heat and touch safety.

Karakteristik kle:

Fonksyonalite dimmable pou klète reglabl.
Strong 3M adhesive for secure mounting, complemented by extra mounting brackets and fixing clips.
Easy installation on smooth, dust-free surfaces.
Durable and environmentally conscious design with low carbon footprint, no radiation, and no flicker.
Safe to use with a 24V working voltage and extremely low heat output.

Lepro LED Strip Light kit showing the coiled strip, dimmer, and power adapter

Figure 1: Components of the Lepro LED Strip Light kit, including the 32.8ft LED strip, dimmer, and power adapter.

2. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your LED strip light:

Prepare sifas la: Ensure the mounting surface is clean, dry, and smooth. Dust, dirt, or moisture can compromise the adhesive's effectiveness.
Mezire epi koupe (Si ou vle): If a shorter length is required, the LED strip can be cut at designated marks (usually indicated by a scissor icon or copper pads). Ensure the power is disconnected before cutting.
Retire papye adezif la: Carefully peel off a small section of the 3M adhesive backing from the strip. Avoid touching the adhesive side to maintain its stickiness.
Aplike bann lan: Press the exposed adhesive section firmly onto the prepared surface. Gradually peel more of the backing while pressing the strip along the desired path.
Sekirize ak klip (Si ou vle): For added security, especially on textured surfaces or corners, use the provided mounting brackets and fixing clips.
Konekte pouvwa: Connect the LED strip to the dimmer, and then connect the dimmer to the 24V power adapter. Ensure all connections are secure.
Ploge nan: Ploge adaptè pouvwa a nan yon priz elektrik estanda.

Four-panel image showing steps for LED strip installation: cleaning surface, removing adhesive, cutting, and pressing the strip.

Figure 2: Visual guide for installing the LED strip, from surface preparation to final adhesion.

Diagram showing the connection of the 10-meter LED strip, dimmer, and 24V power adapter.

Figure 3: Wiring diagram illustrating how to connect the LED strip to the dimmer and power supply.

3. Operasyon Enstriksyon

The Lepro LED Strip Light is designed for simple operation using the included dimmer.

Limen/Etenyen: Rotate the knob on the dimmer clockwise to turn the lights on. Continue rotating clockwise to increase brightness. Rotate counter-clockwise to decrease brightness and turn the lights off.
Dimming: The dimmer allows for stepless adjustment of brightness from 10% to 100%. Adjust the knob to achieve your desired lighting level.

Image showing the dimmer control for the LED strip light, with an illustration of dimming levels from 10% to 100%.

Figure 4: The dimmer allows for precise control over the LED strip's brightness.

4. Antretyen

To ensure the longevity and optimal performance of your Lepro LED Strip Light, follow these simple maintenance guidelines:

Netwayaj: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use abrasive cleaners or excessive moisture, as this can damage the LEDs or adhesive.
Verifikasyon adezif: Periodically check the adhesive along the strip to ensure it remains firmly attached to the surface. If any sections become loose, re-secure them with additional mounting clips or a suitable adhesive if necessary.
Pwovizyon pou pouvwa: Ensure the power adapter is kept in a dry environment and is not subjected to physical stress.
Kondisyon anviwònman: This product is designed for indoor use. Avoid exposing the strip to direct water, high humidity, or extreme temperatures, as it is not water-resistant.

NAN. Depanaj

If you encounter issues with your LED strip light, please refer to the following common troubleshooting steps:

Pwoblèm	Kòz posib	Solisyon
Limyè pa limen.	Pa gen kouran nan priz la. Koneksyon ki lach. Dimmer knob is turned off. Damaged power adapter or strip.	Tcheke priz kouran an ak yon lòt aparèy. Ensure all connections (strip to dimmer, dimmer to adapter, adapter to outlet) are secure. Rotate the dimmer knob clockwise to turn on and increase brightness. Contact customer support if components appear damaged.
Limyè yo ap tranble oswa yo fèb.	Ensifizan pouvwa. Koneksyon ki lach. Anrejistreman gradatè a twò ba.	Ensure the power adapter is correctly rated for the strip length. Tcheke tout koneksyon pou sere. Adjust the dimmer knob to increase brightness.
Adhesive is not holding.	Surface was not clean or smooth. Adhesive touched during installation.	Clean the surface thoroughly and reapply with new adhesive tape or use mounting clips. Use additional mounting clips or a suitable strong adhesive.

6. Espesifikasyon

Karakteristik	Detay
Mak	Lepro
Nimewo Modèl	LED Strip Light,
Longè	32.8 pye (10 mèt)
Kalite sous limyè	LED (SMD 2835)
Kantite poul	600
Tanperati Koulè	6000 Kelvin (lajounen blan)
Flux lumineux	1800 Lumen
Voltage	24 Volts
Wattage	18 wat
Sous pouvwa	Fil elektrik
Karakteristik espesyal	Dimmable
Itilizasyon Andedan kay la / Deyò	Andedan kay la
Materyèl	Plastik, kwiv
Nivo rezistans dlo	Pa reziste dlo
Sètifikasyon	UL ki nan lis
Konpozan ki enkli	32.8ft led strip lights

7. Garanti ak sipò

For detailed warranty information and customer support, please refer to the official Lepro website or the documentation included with your product. You may also find additional resources and contact information on the Lepro Store on Amazon.

Ou ka jwenn yon vèsyon dijital manyèl itilizatè a atravè lyen sa a: Lepro LED Strip Light User Manual (PDF).