Manyèl Enstriksyon pou Bwat Odinatè Phanteks Eclipse P500 Air Mid Tower

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Phanteks Eclipse P500 Air Mid Tower Computer Case. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and safety.

The Phanteks Eclipse P500 Air is a mid-tower chassis designed for high airflow performance and versatile component support, including ATX, Micro ATX, Mini ITX, and E-ATX motherboards. It features a steel chassis with a tempered glass side panel and comes with three pre-installed 140mm D-RGB fans in the front.

Figi 1: Devan view of the Phanteks Eclipse P500 Air Mid Tower Computer Case.

2. Enstalasyon ak Enstalasyon

Follow these steps to install your computer components into the Phanteks Eclipse P500 Air chassis.

2.1 Debalaj ak Premye Enspeksyon

• Retire chasi a nan anbalaj li avèk prekosyon.
• Inspect the chassis for any signs of damage during transit.
• Ensure all accessories (screws, cable ties, manual) are present.

Figi 2: Eksploze view showing removable panels and components for assembly.

2.2 Retire Panno Lateral yo

The tempered glass side panel is hinged and secured with magnets. Gently pull the panel open to access the interior. The solid side panel can be removed by unscrewing the thumbscrews at the rear and sliding it off.

2.3 Enstalasyon mèr

• Install the necessary motherboard standoffs for your motherboard form factor (ATX, Micro ATX, Mini ITX, E-ATX).
• Carefully place your motherboard onto the standoffs and secure it with screws.

Figi 3: Enteryè view of the chassis, illustrating motherboard mounting area and fan locations.

2.4 Enstalasyon Disk Depo

The case supports up to 10 x 3.5" internal bays and 3 x 2.5" internal bays.

• Disques 3.5" yo: Utilize the drive cages located in the PSU shroud area or behind the motherboard tray.
• Disques 2.5" yo: Mount 2.5" SSDs/HDDs to the dedicated brackets behind the motherboard tray.

Figi 4: Enteryè dèyè view, highlighting cable management channels and 2.5" drive mounts.

2.5 Enstalasyon ekipman pou pouvwa a

Install your ATX power supply into the dedicated compartment at the bottom rear of the chassis. Secure it with screws from the rear.

2.6 Enstalasyon Kat Grafik ak Kat Ekspansyon

• Remove the necessary PCI slot covers from the rear of the chassis.
• Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.
• The case supports 7+3 PCI slots, allowing for vertical GPU mounting with an optional riser cable (not included).

Figure 5: Rear exterior view, detailing the PCI expansion slots and rear fan mount.

2.7 Jesyon kab

Utilize the integrated Velcro straps and cable ties provided to route and secure cables behind the motherboard tray. This improves airflow and aesthetics.

3. Operasyon

The Phanteks Eclipse P500 Air features convenient front I/O ports and integrated D-RGB lighting controls.

3.1 Panèl Antre/Sòti Devan

The top front panel provides access to essential controls and ports:

• Bouton pouvwa: To turn the system on or off.
• Bouton Mòd LED: Cycles through various D-RGB lighting effects.
• LED Color Button: Changes the color of the D-RGB lighting.
• 2 pò USB 3.0: Pou konekte aparèy USB 3.0.
• Mikwofòn Jack: Pou opinyon odyo.
• Kas ekoutè Jack: Pou pwodiksyon odyo.

Figure 6: Close-up of the top front I/O panel, showing USB ports, audio jacks, and LED controls.

3.2 D-RGB Lighting Control

The three pre-installed 140mm D-RGB fans are controlled via the integrated D-RGB controller. Use the LED Mode and LED Color buttons on the front I/O panel to customize the lighting. The D-RGB lighting can also be optionally synchronized with compatible motherboards and software.

Figure 7: Illustration of the integrated D-RGB lighting effects on the front fans.

4. Antretyen

Regular maintenance helps ensure optimal performance and longevity of your computer case.

4.1 Netwayaj Filtè Pousyè

The Eclipse P500 Air features integrated dust filters on the front, top, and bottom (PSU intake) to prevent dust buildup. Regularly clean these filters to maintain optimal airflow.

• Filtre devan: The front mesh panel acts as a dust filter. It can be removed for cleaning.
• Filtè anwo a: Ou ka retire filtè mayetik ki anlè a fasil pou netwaye.
• Filtè anba a: The PSU intake filter slides out from the rear for cleaning.

Use compressed air or a soft brush to remove accumulated dust. Do not use harsh chemicals or abrasive materials.

Figure 8: Detail of the ultra-fine mesh front panel, designed for dust filtration and airflow.

4.2 Netwayaj jeneral

Siye sifas ekstèn bwat la ak yon twal mou, damp cloth. Avoid direct contact with electronic components inside the case.

NAN. Depanaj

This section addresses common issues you might encounter during the setup or operation of your Phanteks Eclipse P500 Air case.

• Sistèm nan pa limen:
  • Ensure the power supply is properly connected to the wall outlet and switched on.
  • Verifye ke kab switch pouvwa a ki soti nan bwat la byen konekte ak tèt koneksyon sou panèl devan kat manman an.
  • Check all internal power connections (24-pin ATX, 8-pin CPU, PCIe power for GPU).
• D-RGB Fans Not Lighting Up:
  • Confirm that the D-RGB cables from the fans are correctly connected to the integrated D-RGB controller or your motherboard's D-RGB header.
  • Press the LED Mode and LED Color buttons on the front I/O panel to cycle through effects and colors.
  • If connected to the motherboard, ensure the motherboard's RGB software is installed and configured correctly.
• Move sikilasyon lè/Tanperati ki wo:
  • Clean all dust filters (front, top, bottom).
  • Ensure fans are oriented correctly for optimal airflow (front intake, rear/top exhaust).
  • Verify that no cables are obstructing airflow inside the case.
• Front USB Ports Not Functioning:
  • Check that the USB 3.0 header cable from the case is securely connected to the corresponding header on your motherboard.

6. Espesifikasyon

Below are the detailed specifications for the Phanteks Eclipse P500 Air Mid Tower Computer Case (PH-EC500ATG_DWT01).

Figure 9: Manufacturer's specification table for the Eclipse P500 Air.

Figure 10: Visual representation of fan and radiator mounting options within the chassis.

7. Garanti ak sipò

Phanteks provides a manufacturer's warranty for this product.

• Peryòd garanti: 5 Years Manufacturer Warranty.
• For warranty claims or technical support, please contact Phanteks customer service or visit their official websit.
• Kenbe prèv acha ou a pou validasyon garanti a.

For further assistance, refer to the official Phanteks websit la oubyen kontakte chanèl sipò yo.