Manyèl Itilizatè Twous Perforatè San Fil WORKPRO Woz

1. Entwodiksyon ak souview

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WORKPRO Pink Cordless Drill Driver Set. Please read this manual thoroughly before initial use and retain it for future reference.

Figure 1: The WORKPRO Pink Cordless Drill Driver Set, including the drill, battery, charger, and various bits.

The WORKPRO Pink Cordless Drill Driver is a versatile 12V electric tool designed for various drilling and driving tasks. Its lightweight and ergonomic design makes it suitable for extended use and maneuverability in tight spaces. Key features include a 3/8" keyless chuck, two-speed settings, 18+1 torque adjustment, and an integrated LED light for improved visibility.

2. Konpozan ki enkli

Twous pèseuz san fil WORKPRO woz ou a gen ladan l atik sa yo:

• 1 x 12V Chofè Drill san fil
• 1 x pote sak
• 1 x 1500 mAh ityòm-ion batri
• 1 x 0.4A Charger
• 10 x 1" CR-V Bits (PH1, PH2, PH3, 1/8, 5/32, 3/16, 1/4, T10, T15, T20)
• 6 x Twist Drill Bits (1/8'', 5/32'', 3/16", 11/64", 7/32', 1/4'')
• 1 x Bit Holder

Figure 2: All items included in the WORKPRO Pink Cordless Drill Driver Set.

3. Enstalasyon

3.1 Batri Chaje

Before first use, fully charge the 1500 mAh Lithium-ion battery. To charge, remove the battery from the drill by pressing the release buttons on the sides of the battery pack and sliding it out. Connect the 0.4A charger to the battery's charging port and plug the charger into a standard electrical outlet. The charging indicator light on the charger will change color (e.g., red to green) to indicate a full charge. Charging typically takes several hours.

Figure 3: Detached battery and charger for the drill driver.

3.2 Attaching/Changing Bits (Keyless Chuck)

The drill features a 3/8" keyless chuck for easy bit changes. To insert a bit:

1. Rotate the chuck counter-clockwise until the jaws are wide enough to accept the desired drill bit or screwdriver bit.
2. Mete bit la nèt nan mandrin lan.
3. Rotate the chuck clockwise until the jaws firmly grip the bit. Ensure the bit is centered and securely tightened to prevent slippage during operation.

Figure 4: Detail of the keyless chuck mechanism.

4. Operasyon Enstriksyon

4.1 Powering On/Off and Forward/Reverse Control

The drill is activated by pressing the trigger switch. The forward/reverse switch, located above the trigger, allows you to change the rotation direction. Push the switch to the left for forward rotation (for driving screws) and to the right for reverse rotation (for removing screws). A center position locks the trigger for safety and prevents accidental activation.

4.2 Anviwònman vitès

The drill offers two variable speed settings:

• Vitès ba (0-400 RPM): Ideal for driving screws and applications requiring higher torque and more control.
• Gwo vitès (0-1500 RPM): Suitable for drilling and tasks requiring faster rotation.

Adjust the speed using the speed selector switch located on top of the drill.

Figure 5: Two-speed transmission settings for drilling and screwdriving.

4.3 Torque Adjustment (18+1 Clutch)

The 18+1 torque clutch allows you to select the appropriate torque setting for different materials and screw sizes, preventing overtightening or stripping screws. The "1" setting is for minimal torque, while "18" provides maximum torque. The "+1" setting is for drilling mode, bypassing the clutch for continuous power.

Figure 6: Torque adjustment ring with 18 settings plus a drilling mode.

4.4 Built-in LED Light

A trigger-activated LED light illuminates the work area, providing enhanced visibility in dimly lit environments and reducing shadows.

Figure 7: The built-in LED light provides illumination for dark working environments.

5. Antretyen

5.1 Swen Batri

To prolong the life of your Lithium-ion battery, it is recommended to recharge it every 3-6 months if the drill is not used frequently. Avoid completely draining the battery before recharging, as this can reduce its overall lifespan.

5.2 Netwayaj jeneral

Netwaye deyò dril la regilyèman avèk yon twal mou.amp twal. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif. Kenbe ouvèti vantilasyon yo pwòp san pousyè ak debri pou asire motè a refwadi byen.

NAN. Depanaj

If you encounter issues with your WORKPRO Pink Cordless Drill Driver, refer to the following common troubleshooting steps:

• Perfore a pa limen: Ensure the battery is fully charged and properly inserted. Check that the forward/reverse switch is not in the locked (center) position.
• Batri pa chaje: Verify the charger is correctly plugged into both the battery and a working electrical outlet. Check the charger's indicator light. If the issue persists, the battery or charger may need replacement.
• Mòso a ap glise nan mandrin lan: Ensure the chuck is tightened securely around the bit. If the bit continues to slip, the chuck jaws may be worn or damaged.
• Rediksyon pouvwa/pèfòmans: The battery may be low on charge. Ensure the correct speed and torque settings are selected for the task.

For more complex issues, consult the full User Manual (PDF) or contact WORKPRO customer support.

7. Espesifikasyon

8. Resous ak Sipò Anplis

For detailed instructions, safety guidelines, and further assistance, please refer to the official PDF user manuals:

• Gid itilizatè (PDF)
• Manyèl itilizatè (PDF)

For customer support or warranty inquiries, please visit the official WORKPRO websit la oubyen kontakte depatman sèvis kliyan yo dirèkteman.