GOWIN PRELUDE

Manyèl Itilizatè Oratè Bluetooth Pòtab GOWIN Prelude

Model: PRELUDE

Entwodiksyon

Welcome to the user manual for your GOWIN Prelude Portable Bluetooth Speaker. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your speaker to ensure optimal performance.

The GOWIN Prelude is a versatile and compact portable speaker designed for music enthusiasts on the go. It features Bluetooth connectivity for wireless audio streaming, an integrated FM radio, and a hands-free microphone for calls. Its rechargeable battery ensures hours of uninterrupted playback.

GOWIN Prelude Portable Bluetooth Speaker, front view

Figi 1: Devan view of the GOWIN Prelude Portable Bluetooth Speaker.

Kontni pake

Tanpri tcheke kare a pou atik sa yo:

Pwodwi souview

Kontwòl ak pò

Familyarize w ak bouton ak pò oratè a pou w ka itilize li fasilman.

Top view of GOWIN Prelude speaker showing control buttons

Figure 2: Top panel with control buttons (Power, Mode, Volume/Track).

Side view of GOWIN Prelude speaker showing USB, AUX, and Micro SD ports

Figure 3: Side panel with various input ports (USB, AUX, Micro SD, Micro USB charging).

Enstalasyon

Chaje Oratè a

Anvan premye itilizasyon an, chaje oratè a nèt.

  1. Connect the supplied Micro USB charging cable to the Micro USB port on the speaker.
  2. Connect the other end of the cable to a USB power adapter (e.g., phone charger, computer USB port) or a power bank.
  3. The charging indicator light will illuminate (color may vary, typically red) during charging and turn off or change color when fully charged.
  4. Yon chaj konplè pran apeprè 2-3 èdtan.

Nòt: The speaker has a built-in Lithium Ion battery. Do not attempt to replace it.

Enstriksyon Operasyon

Power On/Off

Bluetooth mòd

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no other mode is selected.

  1. Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing blue LED or audible prompt). If not, short press the Mòd (M) bouton pou chanje nan mòd Bluetooth.
  2. Sou telefòn entelijan ou oswa aparèy ki gen Bluetooth, aktive Bluetooth epi chèche aparèy ki disponib yo.
  3. Select "GOWIN Prelude" from the list of devices.
  4. Once paired, the speaker will confirm with an audible prompt, and the LED indicator will stop flashing.
  5. Kounye a ou kapab jwe odyo soti nan aparèy ou an atravè oratè a.

Konsèy: The speaker will automatically reconnect to the last paired device if it's within range and Bluetooth is enabled.

Rele men-gratis

When connected via Bluetooth, the speaker's built-in microphone allows for hands-free calls.

FM Radyo Mode

  1. Kout peze la Mòd (M) bouton an pou chanje nan mòd Radyo FM.
  2. To auto-scan and save available stations, long press the Jwe/Poz bouton. Oratè a pral eskane epi estoke estasyon yo otomatikman.
  3. Kout peze la Previous (-) or Next (+) bouton pou chanje ant estasyon ki anrejistre yo.

Mòd AUX

For devices without Bluetooth, use the AUX input.

  1. Connect a 3.5mm audio cable (not included) from your audio device's headphone jack to the AUX port on the speaker.
  2. Kout peze la Mòd (M) bouton pou chanje nan mòd AUX.
  3. Audio playback will be controlled directly from your connected device.

USB Drive / Micro SD Card Playback

The speaker supports audio playback from USB drives and Micro SD cards.

  1. Insert a USB drive into the USB port or a Micro SD card into the TF card slot.
  2. Oratè a ap chanje otomatikman nan mòd ki koresponn lan epi li pral kòmanse jwe odyo a. files. If not, short press the Mòd (M) bouton an pou chwazi mòd ki kòrèk la.
  3. Sèvi ak la Previous (-) epi Next (+) bouton pou navige sou tras.

Kontwòl Volim

Antretyen

Depanaj

PwoblèmSolisyon
Oratè pa limen.Ensure the battery is charged. Connect the speaker to a power source using the Micro USB cable and try again after a few minutes.
Pa ka asosye ak aparèy Bluetooth.Make sure the speaker is in Bluetooth pairing mode (flashing LED). Ensure Bluetooth is enabled on your device and it's within 10 meters (33 feet) of the speaker. Forget "GOWIN Prelude" from your device's Bluetooth list and try pairing again.
Pa gen son oswa volim nan ba.Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, AUX, USB, TF) is selected. If using AUX, ensure the cable is fully inserted and not damaged.
Resepsyon radyo FM lan pa bon.Try repositioning the speaker. In some cases, connecting the Micro USB charging cable (without power) can act as an antenna to improve reception.
Speaker freezes or becomes unresponsive.Try turning the speaker off and then on again. If it doesn't respond, let the battery drain completely and then recharge it.

Espesifikasyon

Diagram showing GOWIN Prelude speaker dimensions and features

Figure 4: Key dimensions and features of the GOWIN Prelude speaker.

KarakteristikDetay
Non modèlPrelid
MakGOWIN
Koneksyon TeknolojiBluetooth, Oksilyè, USB, Mikwo SD
Kalite OratèSubwoofer
Karakteristik espesyalBluetooth, Hands-Free Calling, FM Radio
Itilizasyon RekòmandeJwè Klas Mizik
Aparèy konpatibSmartphone
Subwoofer Dyamèt45 mm
Maksimòm puisans sòti oratè3 Watts
Enpedans4 Ohm
Audio Sòti ModeMono, Stereo
MateryèlPlastik
KoulèNwa
Kalite batriLityòm Ion (1 obligatwa, enkli)
Lavi batriJiska 4 èdtan
Dimansyon (L x W x H)14.4 x 12 x 4.1 cm
Pwa220 g
Ki enpèmeyabNon

Garanti ak sipò

The GOWIN Prelude Portable Bluetooth Speaker comes with a 1-ane garanti limite apati dat acha a. Garanti sa a kouvri domaj fabrikasyon ak atizan konn fè.

Garanti a pa kouvri:

For warranty claims or technical support, please contact GOWIN customer service through their official channels. Refer to the contact information provided on the product packaging or the official GOWIN websit.

Sipò sou entènèt: Visit the GOWIN Mexico store on Amazon for more information: GOWIN Mexico Store

Dokiman ki gen rapò - PRELID

Preview Gid Itilizatè Gowin Complex Multiplier IP
Gid itilizatè pou IP Miltiplikatè Konplèks Gowin lan, ki detaye karakteristik li yo, deskripsyon pò yo, tan, konfigirasyon, ak konsepsyon referans. IP sa a fèt pou miltiplikasyon nonm konplèks.
Preview Lojisyèl IDE Gowin_EMPU(GW1NS-4C): Manyèl Referans Konplè pou Devlopman
Manyèl referans sa a bay konsèy detaye sou kijan pou itilize lojisyèl Gowin_EMPU(GW1NS-4C) IDE a, ki gen ladan konfigirasyon ak itilizasyon avèk ARM Keil MDK ak GOWIN MCU Designer pou devlopman sistèm entegre.
Preview Gid Itilizatè Zouti Antre ak Sòti Vityèl Gowin
Gid itilizatè pou zouti Gowin Virtual Input Output (GVIO), yon zouti debogaj dinamik siyal dijital pou FPGA yo. Li kouvri konfigirasyon, itilizasyon, ak debogaj konjwen avèk GAO.
Preview Gid Itilizatè Gowin XCORR IP
Gid itilizatè pou Gowin XCORR IP a, ki detaye karakteristik li yo, konfigirasyon li, ak itilizasyon li pou operasyon korelasyon kwaze nan konsepsyon FPGA yo. Li kouvri paramèt antre, deskripsyon pò, distribisyon tan, ak itilizasyon resous yo.
Preview Gid Itilizatè Kòmandman Tcl Lojisyèl Gowin
This user guide provides a comprehensive reference for the Tcl commands used with Gowin Software, detailing command-line interface operations for efficient project management and FPGA design flows, including command syntax, parameters, and examples.
Preview Gowin云源软件用户指南 - GOWIN
Dokiman sa a bay enstriksyon konplè ak detay sou itilizasyon lojisyèl Gowin Yunyuan an, ki gen ladan koòdone li, jesyon pwojè, zouti entegre, ak rezilta. files, ak kòmandman Tcl yo. Li kouvri enfòmasyon sou vèsyon ak detay sipò.