Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of the DIGITEN DFC15 Water Flow Control System. This system is designed for precise measurement and control of water flow, suitable for various applications requiring quantitative liquid dispensing.
Kontni pake
The DIGITEN DFC15 Water Flow Control System package includes the following components:
- 1 x DFC15 Controller
- 1 x G3/4" Flow Sensor
- 1 x G3/4" Electric Solenoid Valve (Normally Closed)
- 1 x DC 12V pouvwa adaptè
- 1 x Capteur Tanperati
- 1 x manyèl itilizatè
Yon souview of all components included in the DIGITEN Water Flow Control System kit, featuring the DFC15 controller, G3/4" flow sensor, G3/4" solenoid valve, power adapter, and temperature sensor.
Espesifikasyon teknik
DFC15 Controller
- Kondisyon pou pouvwa: 12VDC
- Adaptè pouvwa: Input: 100-240VAC; Output: 12VDC, max 2A
- Adapter Lead Length: 1m
- Mezire Presizyon: ± 1%
- Output for Solenoid Valve: 12VDC, max 5A
- Capteur Tanperati: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉, Thread: M8
- Max Total Volume: 999999 G/L
- Quantitative Range: 0-9999.99 G/L
- Ranje pousantaj koule: 0-9999.99 LPM (GPM)
- Longè kab: 1m
- Dimansyon: 88mm x 126mm x 30mm
- Pwa: 200g
- Anviwònman operasyon: Temperature: 0-50℃/32-122℉; Relative Humidity: <85%
G3/4" Flow Sensor
- Frekans: F=5.5 * Q (L / Min)
- Ranje koule: 1-60L/min
- Allowable Compression: Water pressure 1.75 Mpa below
- Kalite Capteur: Efè Hall
- Longè kab: 15cm
- Erè: ± 2%
G3/4" Solenoid Valve
- Presyon travay: 0.02-0.8Mpa
Enstalasyon ak Enstalasyon
Proper installation is crucial for accurate operation. Follow these steps:
- Plasman Konpozan: Properly install the flow sensor and solenoid valve in the water line. Ensure the flow sensor and solenoid valve direction aligns with the water flow direction. An arrow on the flow sensor indicates the correct flow path.
- Fil elektrik: Connect the flow sensor, solenoid valve, and temperature sensor to the DFC15 controller according to the wiring diagram. Connect the 12VDC power adapter to the controller.
- Premye Anviwònman: Before operation, set the K value, quantitative value, and maximum alarm value on the DFC15 controller. Refer to the operating instructions for details on setting these parameters.
- Konsiderasyon anviwònman an: Avoid exposing the controller to water or excessive humidity to prevent damage.
A schematic diagram illustrating the wiring connections for the DIGITEN DFC15 controller, power adapter, solenoid valve, temperature sensor, and flow sensor, along with their placement in the water line.
An illustrative diagram showing a typical installation of the DIGITEN water flow control system, with the controller, solenoid valve, and flow sensor integrated into a water pipe.
The G3/4 inch water flow sensor, highlighting the arrow indicating the correct direction of water flow for proper installation.
Enstriksyon Operasyon
Once the system is installed and initial settings are configured, follow these steps for operation:
- Kòmanse operasyon: Peze a KOURI / SISPANN button to initiate the control process. The controller will begin displaying the current flow volume, current flow rate, and the faucet animation will start.
- Quantitative Control: The controller will automatically turn off the solenoid valve when the total flow reaches the pre-set quantitative value. At this point, the total value display will stop, the faucet animation will cease, and the flow rate will return to zero.
- Repeat Operation: To repeat the same job, press the KOURI / SISPANN bouton ankò.
The DIGITEN DFC15 LCD display controller, illustrating its dimensions and button layout for operation.
Antretyen
To ensure the longevity and proper functioning of your DIGITEN DFC15 Water Flow Control System, observe the following maintenance guidelines:
- Pwoteje Kontwolè a: Always avoid direct contact of the controller with water or other liquids. Ensure it is installed in a dry environment.
- Enspeksyon regilye: Tcheke tout koneksyon yo detanzantan pou wè si yo sere epi si gen siy itilizasyon.
- Netwayaj: Clean the exterior of the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Depanaj
If you encounter issues with your DIGITEN DFC15 Water Flow Control System, consider the following:
- Solenoid Valve Not Actuating: If you are using a solenoid valve that requires more than 2A, ensure you are using a suitable power adapter capable of supplying up to 5A. The included power adapter is rated for a maximum of 2A.
- Lekti koule ki pa egzak: Verify that the flow sensor is installed correctly with the water flow direction matching the arrow on the sensor. Check for any blockages in the flow path.
- Kontwolè a pa limen: Ensure the 12VDC power adapter is securely connected to both the controller and a functional power outlet.
Garanti
The DIGITEN DFC15 Water Flow Control System comes with a 12-mwa garanti apati dat acha a, ki kouvri domaj fabrikasyon. Tanpri konsève prèv acha ou pou reklamasyon garanti.
Sipò
For further assistance, technical support, or warranty inquiries regarding your DIGITEN DFC15 Water Flow Control System, please contact DIGITEN customer service through their official channels.
