Novastar MCTRL4K LED Display Controller User Manual

1. Entwodiksyon

The Novastar MCTRL4K is a high-performance LED display controller designed for real 4K@60Hz video processing. It offers advanced features for large LED screen applications, supporting ultra-high definition resolutions and various input/output interfaces. This manual provides essential information for the proper setup, operation, and maintenance of your MCTRL4K controller.

Karakteristik kle yo enkli:

• Supports 4K UHD resolution up to 4096×2160@60Hz, with a maximum width of 8K.
• Advanced HDR10/HLG support for enhanced contrast, subtle shading, and a broadened color spectrum.
• Equipped with 16-channel Neutrik Gigabit Ethernet outputs and 4-channel optical fiber outputs for robust connectivity.
• Comprehensive video input interfaces: 1x DisplayPort 1.2, 1x HDMI 2.0, and 2x dual-link DVI.
• Designed for low latency performance in LED display applications.

2. Debale ak Kontni Pakè a

Carefully unpack the Novastar MCTRL4K controller and verify all components are present and undamaged. The standard package includes the MCTRL4K unit, an American-Standard power plug, and various connection cables.

Figure 2.1: Novastar MCTRL4K controller with its main packaging box and accessory box.

Figure 2.2: Novastar MCTRL4K controller unit with included cables and documentation.

Figure 2.3: Contents of the accessory box including various connection cables.

3. Enstriksyon Enstalasyon

Follow these steps to set up your Novastar MCTRL4K LED Display Controller.

3.1 Enstalasyon Fizik

The MCTRL4K is designed for rack mounting. Ensure adequate ventilation around the unit to prevent overheating.

3.2 Konekte pouvwa

1. Ensure the power switch on the rear panel is in the OFF position.
2. Connect the provided American-Standard power plug to the AC input on the rear panel of the MCTRL4K.
3. Ploge lòt bout kab kouran an nan yon priz kouran ki chita.

3.3 Koneksyon Antre ak Sòti

The MCTRL4K offers a variety of input and output ports. Refer to the diagram below for port identification.

Figure 3.1: Rear panel of the Novastar MCTRL4K with input (DP1.2, HDMI2.0, DVI) and output (Ethernet, Optical Fiber) ports.

1. Videyo Antre: Connect your video source (e.g., computer, media player) to the MCTRL4K using one of the following ports:
   • DisplayPort 1.2 (DP1.2)
   • HDMI 2.0
   • Dual-link DVI (DVI-D 1 or DVI-D 2)

   Nòt: Ensure your source device is configured to output a resolution compatible with the MCTRL4K's capabilities (up to 4K@60Hz).

2. LED Display Output: Connect the MCTRL4K to your LED display panels using the output ports.
   • Ethernet Outputs: Use standard Ethernet cables to connect the 16 Neutrik Gigabit Ethernet outputs to your LED receiving cards.
   • Optical Fiber Outputs: For long-distance transmission or high-bandwidth requirements, use optical fiber cables with the 4-channel optical fiber outputs.
3. Koneksyon kontwòl:
   • Kontwòl USB: Connect a USB cable from your computer to the USB IN port on the MCTRL4K for configuration and control via Novastar software.
   • Ethernet kontwòl: Connect an Ethernet cable from your computer or network switch to the CONTROL ETHERNET port for network-based control.

4. Operasyon Enstriksyon

Once all connections are secure, you can power on and operate the MCTRL4K.

4.1 Limen/Etenyen

1. To power on, flip the power switch on the rear panel to the ON position. The front panel display will illuminate.
2. Pou etenn li, vire switch pouvwa a nan pozisyon OFF.

4.2 Konfigirasyon debaz

Initial configuration of the LED display parameters (e.g., screen resolution, mapping, brightness) is typically performed using Novastar's control software on a connected computer. Refer to the software's user guide for detailed instructions on:

• Screen configuration and mapping.
• Input source selection and management.
• Brightness, contrast, and color adjustments.
• HDR10/HLG mode activation and settings.

Figure 4.1: Front panel of the Novastar MCTRL4K, featuring the display screen and control knob for direct adjustments.

4.3 Chanje Sous Antre

Input sources can be switched via the control software or, for basic functions, potentially through the front panel controls (refer to the device's specific firmware interface for exact navigation).

4.4 HDR10/HLG Activation

To utilize the HDR10/HLG features, ensure your video source supports HDR output and activate the corresponding settings within the Novastar control software. This will enable the controller to process and display content with high dynamic range, resulting in improved visual quality.

5. Antretyen

Proper maintenance ensures the longevity and optimal performance of your MCTRL4K controller.

• Netwayaj: Regularly clean the exterior of the unit with a soft, dry cloth. Avoid using liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris.
• Vantilasyon: Maintain clear airflow around the unit. Do not block ventilation holes.
• Mizajou mikrolojisyèl: Periodically check the Novastar official website for firmware updates. Keeping the firmware updated can improve performance, add features, and resolve issues.
• Jesyon kab: Ensure all cables are securely connected and properly managed to prevent accidental disconnections or damage.

NAN. Depanaj

This section addresses common issues you might encounter with the MCTRL4K controller.

6.1 Pa gen pouvwa

• Check if the power cable is securely connected to both the MCTRL4K and the power outlet.
• Verifye ke priz kouran an fonksyone.
• Asire w ke switch pouvwa a sou panèl dèyè a nan pozisyon ON.

6.2 No Video Output on LED Display

• Confirm that the video source is correctly connected to an input port (DP1.2, HDMI2.0, or DVI) and is active.
• Check the connection between the MCTRL4K's Ethernet/Optical Fiber outputs and the LED receiving cards.
• Verify the LED display's power and operational status.
• Ensure the screen configuration and mapping in the Novastar control software are correct.
• Check if the input resolution from the source matches the controller's capabilities and the LED display's configuration.

6.3 Control Software Cannot Connect to MCTRL4K

• If using USB, ensure the USB cable is connected to the USB IN port and the correct drivers are installed on your computer.
• If using Ethernet, verify the network cable connection and IP address settings for both the computer and the MCTRL4K.
• Temporarily disable any firewall software on your computer that might be blocking the connection.

6.4 Image Quality Issues (e.g., flickering, incorrect colors)

• Check the quality of the input video source and cables.
• Verify the color depth and refresh rate settings in the control software.
• If using HDR10/HLG, ensure both the source and the LED display are properly configured for HDR.
• Perform a screen calibration using the Novastar control software.

7. Espesifikasyon

The following table details the technical specifications of the Novastar MCTRL4K LED Display Controller.

8. Garanti ak sipò

For warranty information, please refer to the warranty card included with your product or visit the official Novastar website. Novastar provides technical support for its products.

• Sipò sou entènèt: Visit the Novastar official website for FAQs, documentation, and support resources.
• Kontakte sipò: For direct technical assistance, contact Novastar customer service through the channels provided on their websit.