WORKPRO 6-in-1 Cordless Staple Gun Instruction Manual

1. Entwodiksyon

Thank you for choosing the WORKPRO 6-in-1 Cordless Staple Gun. This versatile electric stapler is designed for various home improvement projects, upholstery, DIY artwork, and light construction tasks. It offers cordless convenience and compatibility with six types of fasteners, including T50, JT21, T25, T20 staples, Brad nail BN18, and PIN nails. Please read this manual thoroughly before operation to ensure safe and efficient use of the tool.

2. Enstriksyon Sekirite

Toujou swiv prekosyon sekirite debaz yo lè w ap itilize zouti elektrik pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl.

• Li tout enstriksyon yo: Familiarize yourself with the tool's operation and safety features.
• Mete pwoteksyon pou je: Toujou mete linèt sekirite oswa pwoteksyon pou pwoteje tèt ou kont debri k ap vole.
• Kenbe Zòn Travay la Apwòp: Asire w ke espas travay ou a byen limen epi li pa gen dezòd.
• Do Not Operate While Charging: The staple gun cannot be used during the charging procedure.
• Proper Hand Position: Maintain a firm grip and keep hands away from the firing area.
• Evite tire aksidantèlman: The tool features a double safety mechanism; ensure the ON/OFF switch is in the "O" (off) position when not in use or when loading/unloading fasteners.
• Use Correct Fasteners: Only use staples and nails compatible with this tool as specified in the manual.
• Sere san danje: Sere zouti a nan yon kote ki sèk, an sekirite, lwen timoun yo.

3. Pwodwi souview

Understand the key components of your WORKPRO Cordless Staple Gun for proper operation.

Figi 3.1: Labeled components of the WORKPRO Cordless Staple Gun. This image highlights the Charging Indicator, Trigger, On/Off Switch, Magazine Window, Quick Release Magazine, and Charging Sockets for easy identification.

• Endikatè chaje: Displays battery charging status.
• Deklanche: Activates the stapling mechanism when pressed.
• Bouton On/Off: Controls the power to the tool. Set to "-" for ON, "O" for OFF.
• Magazine Window: Allows monitoring of staple/nail levels.
• Quick Release Magazine: For fast and easy loading/unloading of fasteners.
• Charging Sockets: Pò pou konekte chajè a.

4. Enstalasyon

4.1 Chaje batri a

The staple gun is equipped with a rechargeable Lithium-Ion battery. Ensure the battery is fully charged before first use and after each use to prolong its life.

1. Ensure the ON/OFF switch is in the "O" (off) position.
2. Connect the charger to the charging socket on the tool.
3. Ploge plato a nan yon priz elektrik estanda.
4. Limyè endikatè chaj la ap limen pou montre eta chaj la.
5. Once fully charged, disconnect the charger. The tool cannot be operated while charging.
6. If the staple gun is not used often, recharge every 2-3 months to maintain battery health.

Figi 4.1: Charging the WORKPRO Cordless Staple Gun. This image illustrates the charger indicator, the comfortable bi-material handle, and the charger being connected to the tool.

4.2 Chaje Atik Fikse

This staple gun is compatible with 6 types of fasteners: T50, JT21, T25, T20 staples, Brad nail BN18, and PIN nails. Ensure the ON/OFF switch is in the "O" (off) position before loading.

Figi 4.2: Step-by-step guide for loading staples and nails. This image demonstrates squeezing the magazine end, placing staples with sharp edges upwards, placing nails in the left side, and closing the magazine until it locks.

1. Magazin Louvri: Squeeze the magazine end and slide it out from the bottom of the tool.
2. Chaje Staples: Place staples into the magazine with the sharp edge pointing upwards.
3. Load Nails (if applicable): Place nails in the left side of the magazine with the sharp edge pointing upwards.
4. Fèmen Magazin: Push the magazine back into the tool until it locks securely into position.

Figi 4.3: Compatible fastener types for the WORKPRO 6-in-1 Cordless Staple Gun. This image displays the icons and names for T50, JT21, T20, CT10X/Rapid No.36, Gauge18, and PIN/Rapid No.9 fasteners.

Figi 4.4: Specifications for T50, JT21, and T20 staples. This image provides details on compatible rapid numbers, foot length ranges, and recommended nail lengths for different wood densities.

Figi 4.5: Specifications for T25, BN18, and PIN fasteners. This image provides details on compatible rapid numbers, foot length ranges, and recommended nail lengths for different wood densities.

5. Operasyon Enstriksyon

5.1 Limen/Etenyen

• To turn ON the staple gun, slide the ON/OFF switch to the "-" position.
• To turn OFF the staple gun, slide the ON/OFF switch to the "O" position. Always turn off the tool when not in use or when performing maintenance.

5.2 Firing the Staple Gun

The WORKPRO staple gun features a double safety mechanism to prevent accidental firing.

Figi 5.1: Double Safety Mechanism. This image explains how the tool prevents firing until the nose is in contact with the work surface, protecting against accidental dents and dings.

1. Ensure the ON/OFF switch is in the "-" (on) position.
2. Place the nose of the staple gun firmly against the work surface. The contact safety device must be pressed in for the tool to activate.
3. Press the trigger to fire a staple or nail.
4. For optimal penetration, a two-handed operation is recommended, applying firm pressure to the tool against the surface.

Figi 5.2: Tips for good penetration and safety features. This image illustrates using two hands for better penetration and explains how the ON/OFF switch and contact safety device prevent accidental firing.

Figi 5.3: WORKPRO staple gun in use. This image shows the tool being operated to secure material, highlighting its practical application.

The staple gun can fire up to 60 staples per minute and delivers approximately 1100 shots per full charge, making it efficient for large surfaces. It is suitable for materials like pine, oak, drywall, and MDF.

6. Antretyen

Regular maintenance ensures the longevity and optimal performance of your staple gun.

• Netwayaj: Keep the tool clean and free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use solvents or harsh chemicals.
• Magazine Inspection: Periodically check the magazine for any obstructions or bent fasteners that could cause jamming.
• Swen batri: As mentioned, recharge the battery every 2-3 months if not in frequent use. Avoid fully discharging the battery for extended periods.
• Depo: Store the staple gun in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the ON/OFF switch is in the "O" (off) position before storage.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO websit la. Kenbe resi acha ou kòm prèv acha.

Manifakti: HANZGHOU GREATSTAR INDUSTRIEL CO.LTD