Pwodwi souview
The Progress Lighting Eclipse LED Wall Sconce, model P710090-009-30, is a contemporary lighting fixture designed for both residential and commercial applications. It features a satin white glass shade in a half-moon silhouette, complemented by a beveled brushed nickel metal frame.
Imaj: Devan view of the Progress Lighting Eclipse LED Wall Sconce, showcasing its brushed nickel finish and satin white glass shade.
Imaj: Side profile of the wall sconce, highlighting its half-moon design and depth.
Enstalasyon ak Enstalasyon
Enfòmasyon enpòtan sou sekirite: Read all instructions carefully before beginning installation. Turn off electrical power at the main circuit breaker panel before installing or servicing this fixture. Consult a qualified electrician to ensure correct branch circuit connections and compliance with all local electrical codes.
Aparèy sa a apwopriye pou damp kote yo ye.
Lis verifikasyon konpozan yo:
- Fixture Assembly (A)
- Mounting Plate (B)
- Outlet Box Screws (C)
- Montaj Vis (D)
- Wire Nuts (E)
- Ground Screw (F)
- Glass Shade (G)
- Shade Screws (H)
Etap enstalasyon:
- Prepare pou enstalasyon: Ensure power is off at the circuit breaker. Carefully unpack all components and inspect for any damage.
- Tache Plak Montaj: Secure the mounting plate (B) to the electrical outlet box using the provided outlet box screws (C).
- Koneksyon fil elektrik:
- Connect the white wire from the fixture to the white (marked or ribbed) supply wire using a wire nut (E).
- Connect the black wire from the fixture to the black (or smooth) supply wire using a wire nut (E).
- Connect the bare copper or green ground wire from the fixture to the green ground screw (F) on the mounting plate, then to the bare copper or green supply ground wire.
- Mount Fixture: Carefully align the fixture assembly (A) with the mounting plate and secure it using the mounting screws (D).
- Enstale Glass Shade: Place the glass shade (G) onto the fixture and secure it with the shade screws (H).
Image: Detailed diagram illustrating the assembly steps and wiring connections for the wall sconce. Refer to this diagram for visual guidance during installation.
Imaj: Dèyè view of the sconce, showing the integrated LED module and mounting points before installation.
Image: Close-up of the integrated LED light source, which is designed for long-term performance and energy efficiency.
Enstriksyon Operasyon
This LED wall sconce is designed for simple operation. Once properly installed and wired to a standard wall switch, the fixture can be turned on and off using that switch. The integrated LED light source provides consistent illumination without the need for bulb replacement.
Antretyen
To maintain the appearance and performance of your Progress Lighting Eclipse LED Wall Sconce, follow these guidelines:
- Netwayaj: Turn off power to the fixture before cleaning. Wipe the metal frame with a soft, dry cloth. For the glass shade, use a soft cloth dampened with a mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish or glass.
- Ki ap dirije Modil: The LED module is integrated and does not require user maintenance or replacement. Do not attempt to disassemble the LED component.
- Enspeksyon: Tcheke tout koneksyon ak pyès montaj yo detanzantan pou asire yo rete byen fèm.
Depanaj
If your wall sconce is not functioning as expected, consider the following common issues and solutions:
- Limyè pa limen:
- Asire w ke switch miray la nan pozisyon 'ON'.
- Check the circuit breaker to confirm power is supplied to the fixture.
- Verify all wiring connections are secure and correctly made according to the installation instructions. If unsure, consult a qualified electrician.
- Light flickers or dims:
- Ensure the fixture is not connected to an incompatible dimmer switch. This fixture is designed for 120V operation and may not be compatible with all dimmer types.
- Tcheke pou koneksyon fil elektrik ki lach.
If these steps do not resolve the issue, contact customer service for further assistance.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Pwogrè ekleraj |
| Nimewo Modèl | P710090-009-30 |
| Koulè | Brushed Nickel (Frame), Satin White (Shade) |
| Materyèl | Alloy Steel (Frame), Glass (Shade) |
| Fòm aparèy limyè | Sconce |
| Kalite chanm | Living Room, Residential, Commercial |
| Itilizasyon Andedan kay la / Deyò | Outdoor (Suitable for damp kote) |
| Sous pouvwa | AC |
| Kalite sous limyè | Entegre dirije |
| Fini Kalite | Fini |
| Kantite sous limyè | 1 |
| Voltage | 120 Volts |
| Wattage | 17 wat |
| Tanperati Koulè | 3000 Kelvin |
| Sòti Lumen | 1211 Lumen |
| Lavi (èdtan) | 50,000 (L70/TM-21) |
| Chanje Kalite | Touch (Refers to general control, not integrated into fixture) |
| Kalite aliye | Ki vle pèse anvlòp la |
| Asanble obligatwa | Wi |
| Pwa atik | 2.79 liv |
| Dimansyon (W x H x P) | 15.5 pous x 7.5 pous x 4 pous |
| Sètifikasyon | ADA, Energy Star, cCSAus Damp location listed, Meets California Title 24 JA8-2016 |
Image: Technical line drawing displaying the width (15.5 inches), height (7.5 inches), and depth (4 inches) of the wall sconce.
Image: Official product specification sheet providing detailed technical data and dimensions for the P710090-009-30 model.
Enfòmasyon sou Garanti
Pwodui Progress Lighting sa a kouvri pa yon 5-ane garanti limite. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer service.
Sipò pou Kliyan
For any questions, technical assistance, or warranty claims, please contact Progress Lighting customer service:
- Telefòn: 1-800-447-1723
- Websit: Vizite sit ofisyèl Progress Lighting lan websit la pou plis resous ak opsyon pou kontakte yo.
