Hooke Road QP.GY-1004

Hooke Road RAM Rear Seat Floor Locking Storage Box

Model: QP.GY-1004 | Brand: Hooke Road

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Hooke Road RAM Rear Seat Floor Locking Storage Box. This product is designed to replace the stock plastic storage bin in compatible Dodge RAM pickup trucks, offering a secure and lockable storage solution. It is constructed from durable 13-gauge (3/32 inch) steel with a texture powder coat finish, ensuring longevity and security for your stored items.

Hooke Road RAM Rear Seat Floor Locking Storage Box installed in a truck, with the product shown separately below.

Figure 1.1: The Hooke Road RAM Rear Seat Floor Locking Storage Box and its typical installed location in a Dodge RAM truck.

2. Pwodwi Features

Top-desann view of the Hooke Road locking storage box with a key inserted into the lock.

Figi 2.1: Top view of the locking storage box, highlighting the key lock mechanism.

The Hooke Road locking storage box shown with its lid open, revealing the interior space.

Figure 2.2: The storage box in an open position, demonstrating access to the interior.

3. Espesifikasyon

AtribiDetay
MakSou entènèt jwèt Hooke Road
Nimewo ModèlQP.GY-1004
Dimansyon pwodwi (L x W x H)12.41"D x 4.84"W x 1.06"H
Pwa atik1.04 kilogram (2.29 liv)
MateryèlAlloy Steel, plastik
KoulèNwa
Kalite fèmenKle
Kapasite64 pous kib
Kalite aliyeMount Floor
Konpozan ki enkli1 x Locking Storage Box, 2 x keys
Diagram showing the dimensions of the Hooke Road locking storage box in inches.

Figure 3.1: Product dimensions for the storage box.

4. Enstalasyon ak Enstalasyon

Installation of the Hooke Road RAM Rear Seat Floor Locking Storage Box is designed to be straightforward. It replaces the existing plastic storage bin located under the rear seat floor. For detailed visual instructions, please refer to the official installation manual PDF provided by Hooke Road.

Tan Enstalasyon Estimasyon: Approximately 10-45 minutes, depending on familiarity with the vehicle's interior.

Zouti obligatwa (pa enkli):

Etap enstalasyon:

  1. Prepare machin: Ensure the vehicle is parked on a level surface and the engine is off. Clear any items from the rear floor area.
  2. Remove Stock Bin: Carefully loosen and remove the fasteners securing the existing plastic storage bin in the rear floor. Gently lift and remove the plastic bin.
  3. Position New Box: Place the Hooke Road locking storage box into the vacant floor cavity. Ensure it aligns correctly with the existing mounting points.
  4. Bwat an sekirite: Reinstall the original fasteners (or provided hardware, if applicable) to secure the new steel storage box firmly in place. Tighten all fasteners to manufacturer specifications.
  5. Retain Lid: The original plastic floor lid can be placed back over the installed locking storage box.
Fèmen view of the Hooke Road locking storage box installed in the rear floor of a truck, showing the keyhole.

Figure 4.1: The storage box installed, showing the key access point.

The installed storage box with its lid open, revealing the interior space and the locking mechanism.

Figi 4.2: View of the installed box with the lid open.

For a comprehensive guide, please download the official installation manual: Hooke Road Installation Manual (PDF)

5. Operasyon Enstriksyon

The Hooke Road RAM Rear Seat Floor Locking Storage Box operates with a simple key-based locking mechanism.

To Lock the Storage Box:

  1. Ensure the storage box lid is fully closed and flush with the surrounding floor.
  2. Insert one of the provided keys into the lock cylinder located on the lid.
  3. Turn the key clockwise until the lock mechanism engages and the lid is secured.
  4. Remove the key. Store spare keys in a safe, accessible location outside the vehicle.

To Unlock and Access the Storage Box:

  1. Insert the correct key into the lock cylinder.
  2. Turn the key counter-clockwise to disengage the lock.
  3. Gently lift the lid to access the storage compartment.
  4. When finished, close the lid and lock it for security.

6. Antretyen

Proper maintenance will ensure the longevity and continued functionality of your Hooke Road storage box.

NAN. Depanaj

If you encounter issues with your storage box, refer to the following common problems and solutions:

PwoblèmKòz posibSolisyon
Key is difficult to turn or stuck in lock.Dirt/debris in lock cylinder; lack of lubrication; bent key.Apply graphite lubricant to the lock. Gently wiggle the key. If key is bent, use a spare. Do not force the key.
Lid does not close or latch properly.Obstruction; misaligned installation; damaged hinge.Check for any items blocking the lid. Verify installation alignment and mounting screws. Inspect hinges for damage.
Box feels loose after installation.Fastener montaj yo lach.Re-tighten all mounting fasteners securely.

8. Garanti ak sipò

Hooke Road products are manufactured to high standards. For specific warranty information regarding your Rear Seat Floor Locking Storage Box, please refer to the warranty documentation included with your purchase or visit the official Hooke Road websit.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Hooke Road customer support directly. You can find contact information on the Hooke Road brand store or their official websit.

Visit the Hooke Road Store: Hooke Road Amazon Store

Dokiman ki gen rapò - QP.GY-1004

Preview Hooke Road BXG.8204-S Rear Bumper Installation Guide
Step-by-step installation guide for the Hooke Road BXG.8204-S Rear Bumper, including parts list, required tools, and assembly instructions for Ford F-150 trucks.
Preview Enstriksyon pou enstalasyon pare-chòk dèyè Hooke Road BXG.5101
Comprehensive installation guide for the Hooke Road BXG.5101 Rear Bumper. This document provides a detailed parts list, required tools, and step-by-step instructions with textual descriptions of diagrams for fitting the bumper to your vehicle.
Preview Enstriksyon pou enstalasyon pare-chòk dèyè Hooke Road BXG.6033
Comprehensive installation guide for the Hooke Road BXG.6033 Rear Bumper. Includes a detailed parts list, required tools, step-by-step instructions, and important notes for truck owners.
Preview Gid Enstalasyon Pare-chòk Devan Hooke Road BXG.6024-S pou Dodge Ram 1500
Enstriksyon konplè pou enstalasyon pare-chòk devan Hooke Road BXG.6024-S la, ki fèt pou Dodge Ram 1500 (2013-2018). Gen ladan lis pyès yo, zouti ki nesesè yo, ak yon gid asanblaj etap pa etap.
Preview Hooke Road BXG.9918-S Additional Tool Box Installation Guide
Step-by-step installation instructions for the Hooke Road BXG.9918-S Additional Tool Box. Includes parts list, tools required, and detailed assembly steps for truck beds.
Preview Gid Enstalasyon Revètman Garde-boue Enteryè Dèyè Hooke Road BXG.7025-S
Detailed step-by-step instructions for installing Hooke Road BXG.7025-S Rear Inner Fender Liners. Includes a comprehensive parts list, required tools, and visual aids described in text.