Manyèl Itilizatè Kamera Dòm IP LTS CMIP3342W-28MA 4MP

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS CMIP3342W-28MA 4MP IP Turret Dome Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Enfòmasyon sou Sekirite

• Ensure the power supply meets the camera's requirements. Incorrect voltage ka lakòz domaj.
• Pa ekspoze kamera a nan tanperati ekstrèm, imidite, oswa anviwònman koroziv.
• Avoid pointing the camera lens directly at strong light sources for extended periods, as this may damage the image sensor.
• Manyen kamera a avèk prekosyon. Pa lage l oswa pa mete l anba gwo vibrasyon.
• All installation and service should be performed by qualified personnel.

3. Pake kontni

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your supplier immediately.

• LTS CMIP3342W-28MA IP Turret Dome Camera
• Vis ak ploge miray pou monte
• Modèl egzèsis
• Kle Egzagòn
• Twous Konektè ki Enpèmeyab
• Gid Quick Start (dokiman sa a)

Imaj 3.1: The LTS CMIP3342W-28MA IP Turret Dome Camera shown with its included accessories, including mounting hardware and a drill template for installation.

4. Pwodwi souview

The LTS CMIP3342W-28MA is a 4MP IP Turret Dome Camera designed for reliable surveillance. It features a 2.8mm fixed lens, built-in microphone, Wide Dynamic Range (WDR), and 100ft (30m) IR night vision.

Imaj 4.1: Devan view of the LTS CMIP3342W-28MA camera, highlighting the lens and IR illuminators.

Imaj 4.2: Side view of the camera, illustrating the turret design which allows for flexible angle adjustment after mounting.

5. Enstalasyon ak Enstalasyon

5.1 Kote montaj

Choose a suitable mounting location that provides the desired field of view and is within range of your network infrastructure. Ensure the surface is strong enough to support the camera's weight.

5.2 Etap montaj

1. Affix the provided drill template to the desired mounting surface.
2. Drill holes according to the template for mounting screws and cable routing.
3. Insert wall plugs into the drilled holes if mounting on masonry.
4. Route the network cable through the designated hole.
5. Fikse baz kamera a sou sifas montaj la avèk vis yo bay yo.
6. Ajiste ang kamera a jan sa nesesè.

5.3 Fil elektrik ak koneksyon

This camera utilizes Power over Ethernet (PoE) for both power and data transmission. Connect a standard Ethernet cable from your PoE-enabled switch or NVR to the camera's network port. The camera is not compatible with DC power or BNC video connections.

Imaj 5.1: Illustration of compatible network cable (PoE) for the camera, contrasting with incompatible DC power and BNC video connections.

6. Operasyon Enstriksyon

6.1 Inisyal Konfigirasyon

Upon first power-up, the camera will obtain an IP address via DHCP if available. You can use a manufacturer-provided IP search tool to discover the camera's IP address on your network. Access the camera's web koòdone pa antre adrès IP li nan yon web navigatè.

6.2 Web Aksè koòdone

Enter the default username and password (refer to your Quick Start Guide or manufacturer's documentation for default credentials). It is highly recommended to change the default password immediately for security purposes.

6.3 Karakteristik kle

• Rezolisyon 4MP: Provides high-definition video for clear image capture.
• 2.8mm lantiy fiks: Ofri yon lajè jaden view, suitable for general surveillance.
• Mikwofòn entegre: Enables audio recording alongside video.
• WDR (Wide Range Dinamik): Amelyore kalite imaj nan sèn ki gen zòn trè klere ak trè fènwa.
• IR Vizyon lannwit: Infrared illuminators provide clear video up to 100ft (30m) in low-light or no-light conditions.
• Deteksyon Mouvman: Configure motion detection zones and sensitivity for event-triggered recording or alerts.

7. Antretyen

7.1 Netwayaj

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent solution applied to the cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7.2 Mizajou Firmware

Tcheke manifakti a regilyèman website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the provided instructions carefully when performing updates.

NAN. Depanaj

• Pa gen pouvwa: Ensure the Ethernet cable is securely connected and your PoE source is active and functioning correctly.
• Pa gen Videyo: Verify network connectivity. Check the camera's IP address and ensure it's accessible on the network. Confirm that the NVR or viewing software is configured correctly.
• Kalite imaj pòv: Clean the lens. Check for obstructions. Adjust camera settings such as exposure, brightness, and WDR in the web koòdone.
• Vizyon lannwit pa travay: Ensure IR illuminators are not obstructed. Check night vision settings in the camera's web koòdone.
• Pa Ka Aksè Web Entèfas: Verify the camera's IP address. Ensure your computer is on the same network segment. Try pinging the camera's IP address.

9. Espesifikasyon

10. Garanti ak sipò

For warranty information and technical support, please refer to the official LTS websit la oubyen kontakte konsesyonè otorize ou a. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.