Craftmade Bolden 50504-FB 4-Light Vanity Bath Lighting Instruction Manual

1. Pwodwi souview

This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade Bolden 4-Light Vanity Bath Lighting fixture, model 50504-FB. This fixture features a flat black finish with clear seeded glass shades, designed for indoor damp kote yo ye.

Image 1.1: Craftmade Bolden 4-Light Vanity Bath Lighting fixture.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Pou diminye risk dife, chòk elektrik, oswa aksidan pèsonèl, toujou swiv prekosyon sekirite sa yo:

• Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• Tout koneksyon fil elektrik yo dwe fèt an akò ak kòd elektrik lokal ak nasyonal yo.
• This fixture is CUL Approved for DAMP Locations. Do not install in areas exposed to direct water spray.
• Pwopozisyon 65 Avètisman: Pwodui sa a ka genyen pwodui chimik Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif. Lave men w apre w fin manyen w.
• Pa depase wat maksimòm lantage espesifye pou anpoul yo.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Limyè twalèt (1)
• Glass Shade(s) (4)
• pake pyès ki nan konpitè (1)
• Gid enstalasyon (1)

Nòt: Anpoul yo pa enkli epi yo dwe achte separeman.

4. Enstalasyon ak Enstalasyon

Assembly is required. Follow these steps for proper installation:

1. Prepare pou enstalasyon: Koupe kouran an nan disjonktè a. Degaje zòn travay la.
2. Materyèl aliye: Attach the mounting bracket to the existing junction box (junction box not included) using the provided hardware. Ensure the bracket is securely fastened.
3. Fil elektrik: Connect the fixture's electrical wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
4. Aparèy sekirite: Carefully align the fixture with the mounting bracket and secure it in place with the provided screws.
5. Enstale lonbraj yo: Gently attach the clear seeded glass shades to the fixture.
6. Enstale anpoul: Screw in the appropriate E26 base bulbs (not included). Do not exceed 100 watts per bulb.
7. Retabli pouvwa: Yon fwa enstalasyon an fini epi tout konpozan yo byen fiks, retabli kouran an nan disjonktè a.

Imaj 4.1: Dimansyon pwodwi pou planifikasyon enstalasyon.

Image 4.2: Assembled fixture detail.

5. Operasyon Enstriksyon

The Craftmade Bolden vanity light operates via a standard wall switch (rocker or push button, not included). This fixture is designed for use with four E26 medium base bulbs, up to 100 watts each, for a total of 400 watts.

• Anpoul konpatibilite: Compatible with Incandescent, CFL, Halogen, or LED bulbs.
• Fonksyonalite gradyasyon: The fixture is dimmable when used with dimmable bulbs and a compatible dimmer switch (sold separately).
• Kontwòl limyè: Use your existing wall switch to turn the light fixture on or off.

6. Antretyen

Regular maintenance ensures the longevity and appearance of your lighting fixture.

• Netwayaj: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Ranplasman anpoul: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 medium base bulbs, not exceeding 100 watts per bulb.
• Tout koulè an vè: The clear seeded glass shades can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.

NAN. Depanaj

If your fixture is not functioning correctly, refer to the following common issues and solutions:

• Limyè pa limen:
  • Tcheke si gen kouran nan disjonktè a.
  • Ensure bulbs are screwed in tightly and are not burnt out.
  • Verifye tout koneksyon fil yo byen fèm.
• Limyè yo tranble:
  • Ensure bulbs are compatible with the dimmer switch, if one is installed.
  • Tcheke pou koneksyon fil elektrik ki lach.
• Diminisyon an pa fonksyone:
  • Confirm that both the bulbs and the wall switch are dimmable.
  • Ensure the dimmer switch is correctly installed and compatible with the bulb type.

Si pwoblèm pèsiste, kontakte sipò kliyan.

8. Espesifikasyon

Detailed technical specifications for the Craftmade Bolden 50504-FB fixture:

Image 8.1: Key specifications overview.

9. Garanti ak sipò

Garanti: This Craftmade lighting fixture comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

Sipò Kliyan: For technical assistance, warranty claims, or any questions regarding your product, please contact Craftmade customer support:

Telefòn: (800) 486-4892

Please have your model number (50504-FB) and date of purchase available when contacting support.