Manyèl Itilizatè Subwoofer Marin FUSION FM-S10SB la

Entwodiksyon

Thank you for choosing the FUSION FM-S10SB Flush Mount Marine Subwoofer. This 10-inch, 400W subwoofer is engineered for marine environments, featuring a square grille, sealed water-resistant construction, and a polypropylene cone with a rubber surround. It is designed to deliver high-quality bass while withstanding harsh marine conditions, meeting IP65 water and dust resistance standards and complying with ASTM standards for UV stability and salt/fog resistance.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FUSION marine subwoofer. Please read it thoroughly before installation and keep it for future reference.

Enfòmasyon sou Sekirite

Always observe the following safety precautions to prevent injury or damage to the product and vessel:

• Dekoneksyon pouvwa: Disconnect the vessel's power supply before beginning any installation or wiring.
• Fil elektrik kòrèk: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Refer to the wiring diagram in the installation section.
• Vantilasyon: Ensure adequate ventilation around the subwoofer to prevent overheating.
• Kote montaj: Choose a stable and secure mounting location that can support the weight of the subwoofer and is free from obstructions.
• Ekspozisyon dlo: While the subwoofer is water-resistant (IP65 rated), avoid direct high-pressure water jets or submersion.
• Enstalasyon pwofesyonèl: If you are unsure about any aspect of the installation, consult a qualified marine electronics installer.
• Nivo volim: Ekspozisyon pwolonje a nivo volim ki wo ka lakòz domaj nan tande.

Pwopozisyon 65 Avètisman: Pwodui sa a ka ekspoze ou ak pwodui chimik Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.

Ki sa ki nan bwat la

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• FUSION FM-S10SB Flush Mount Marine Subwoofer
• Installation Material (screws, mounting template if applicable)
• Fèy Enstriksyon (manyèl sa a)

Enstalasyon ak Enstalasyon

Proper installation is crucial for optimal performance and longevity of your subwoofer. Follow these steps carefully:

1. Chwazi yon kote pou monte

Select a flat, stable surface on your vessel that can accommodate the subwoofer's dimensions (9.84 x 5.51 x 5.04 inches) and provide sufficient clearance behind for wiring and air circulation. The subwoofer is designed for flush mounting.

2. Preparing the Mounting Surface

1. Using the provided mounting template (if included), mark the cutout area on the chosen surface.
2. Carefully cut the opening using appropriate tools. Ensure the cut is clean and precise to allow for a snug fit.
3. Drill pilot holes for the mounting screws as indicated by the template.

3. Fil elektrik Subwoofer la

The FM-S10SB features a dual 2-ohm voice coil. Ensure your amplifier is compatible with this impedance. Proper wiring is essential for sound quality and to prevent damage to the subwoofer or amplifier.

• Parallel Wiring (1 Ohm): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Connect the combined positive to the amplifier's positive output and the combined negative to the amplifier's negative output. This configuration presents a 1-ohm load.
• Fil elektrik seri (4 Ohms): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Connect the remaining positive terminal to the amplifier's positive output and the remaining negative terminal to the amplifier's negative output. This configuration presents a 4-ohm load.

Use marine-grade wiring of appropriate gauge for your power requirements. Ensure all connections are secure and protected from moisture.

4. Mounting the Subwoofer

1. Carefully insert the subwoofer into the prepared cutout.
2. Secure the subwoofer using the provided mounting screws. Do not overtighten, as this can damage the mounting flange.
3. Ensure the grille is properly aligned and seated.

Imaj: Devan view of the FUSION FM-S10SB Marine Subwoofer, showcasing its black square grille and flush-mount design. The grille features a dense pattern of small circular perforations for sound output and protection.

Fonksyonman Subwoofer la

The FUSION FM-S10SB subwoofer is a passive component and requires an external amplifier to operate. Once installed and wired correctly, its operation is controlled by your marine audio system's head unit and ampanviwònman lifier.

• AmpAnviwònman lifier: Adjust the gain, crossover frequency (low-pass filter), and phase settings on your amplifier to optimize the subwoofer's performance with your main speakers. A typical low-pass crossover setting for a subwoofer is between 60Hz and 100Hz.
• Kontwòl Volim: Control the overall system volume through your head unit. Avoid pushing the subwoofer to distortion, which can cause damage.
• Peryòd enskripsyon: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve its long-term performance.

Antretyen

To ensure the longevity and optimal performance of your FUSION marine subwoofer, follow these maintenance guidelines:

• Netwayaj: Regularly wipe down the grille and surrounding surfaces with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water. Avoid abrasive cleaners or solvents.
• Enspeksyon: Periodically inspect the subwoofer for any signs of wear, corrosion, or damage to the cone, surround, or grille. Check wiring connections for tightness and corrosion.
• Pwoteksyon UV: While the grille is UV-resistant, prolonged exposure to direct sunlight can still affect its appearance over time. Consider using a cover when the vessel is not in use for extended periods.
• Winterization: If storing your vessel in freezing temperatures, ensure the subwoofer is protected from extreme cold and moisture.

Depanaj

If you experience issues with your FUSION FM-S10SB subwoofer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Fusion customer support or a qualified service technician.

Espesifikasyon

Garanti ak sipò

Enfòmasyon sou garanti: Your FUSION FM-S10SB Marine Subwoofer comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official Fusion websit la pou wè kondisyon detaye konsènan pwoteksyon garanti a, dire a, ak pwosedi pou fè reklamasyon yo.

Sipò Kliyan: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fusion customer support. Contact information can typically be found on the Fusion websit la oubyen sou anbalaj pwodwi a.

Resous sou entènèt: Vizite Fusion ofisyèl la website for the latest product information, FAQs, and additional support resources.