Explore Scientific RDC1004 Radio-Controlled Desk Clock User Manual

1. Entwodiksyon

This user manual provides detailed instructions for the setup, operation, and maintenance of your Explore Scientific RDC1004 Radio-Controlled Desk Clock. This compact and modern clock features an LED backlit display, alarm with snooze function, and displays indoor temperature and humidity. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

2. Enfòmasyon sou Sekirite

• Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite ki wo.
• Evite jete oswa sibi aparèy la nan gwo enpak.
• Pa eseye demonte oswa repare aparèy la tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Kenbe pil yo lwen timoun yo. Jete pil itilize yo yon fason responsab dapre règleman lokal yo.
• Netwaye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.

3. Pake kontni

Tanpri verifye sa ki nan pake a pou asire w tout atik yo la:

• Explore Scientific RDC1004 Radio-Controlled Desk Clock
• 3 x AAA pil
• Manyèl Itilizatè (dokiman sa a)

4. Pwodwi souview

Familiarize yourself with the components and display of your RDC1004 clock.

Figi 4.1: Devan view of the Explore Scientific RDC1004 Radio-Controlled Desk Clock. The clock features a large, clear digital display showing the current time prominently. Below the time, smaller digits indicate the indoor temperature and humidity. An alarm icon and set alarm time are visible in the upper right corner. The base of the clock shows touch-sensitive buttons labeled "SET", "AL.SET", "UP", "DOWN", and "ON/OFF" for backlight control.

Figi 4.2: Detaye view of the RDC1004 clock's display. This image provides a closer look at the LCD screen, emphasizing the crisp white LED backlight. The main display shows "9:40" as the current time. To the right, the alarm is set for "7:00". Below that, the indoor temperature is "17.7°C" and humidity is "46%". The touch-sensitive controls are clearly visible at the bottom of the clock's face.

Figure 4.3: The RDC1004 clock in a typical home environment. The white clock is positioned on a light wooden table, demonstrating its compact size and modern aesthetic. A green potted plant is visible behind it, suggesting its suitability as a desk or bedside accessory. The display is clearly visible from a distance, indicating good readability.

4.1 Aranjman ekspozisyon

• Ekspozisyon tan: Large digits for hours and minutes.
• Tan alam: Smaller digits, typically in the upper right.
• Tanperati andedan kay la: Displays current indoor temperature in Celsius or Fahrenheit.
• Andedan kay la Imidite: Displays current indoor relative humidity percentage.
• Date/Month Display: Shows the current month and date.
• Radio Control Icon: Indicates successful synchronization with the radio time signal.
• Icône alam: Indicates if the alarm is active.

4.2 Kontwòl

• SET bouton: Used to enter time/date setting mode and confirm selections.
• AL.SET Button: Itilize pou antre nan mòd konfigirasyon alam.
• UP bouton: Used to increase values during setting or toggle display modes.
• DESANN bouton: Used to decrease values during setting or toggle display modes.
• ON/OFF (Backlight) Button: Activates the white LED backlight and night light mode. This is a touch-sensitive control.

5. Enstalasyon

5.1 Enstalasyon batri

1. Jwenn lòj batri a sou do revèy la.
2. Louvri kouvèti lòj batri a.
3. Insert 3 new AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Fèmen kouvèti lòj batri a byen.

Note: The clock will power on automatically once batteries are inserted.

5.2 Initial Setup and Radio-Controlled Time Synchronization

Upon initial power-on, the clock will automatically attempt to synchronize with the DCF (radio-controlled) time signal. This process may take several minutes to several hours, depending on your location and signal strength. During synchronization, the radio control icon will typically flash on the display.

• Place the clock near a window or in an open area for optimal signal reception.
• Avoid placing it near electronic devices that may cause interference (e.g., TVs, computers, microwaves).
• Once synchronized, the radio control icon will appear solid on the display, and the time will be automatically set and updated daily.

If the time does not synchronize automatically after several hours, you may need to manually set the time zone or initiate a manual search for the signal. Refer to the "Operating Instructions" section for manual settings.

6. Operasyon Enstriksyon

6.1 Manual Time and Date Setting

While the clock is radio-controlled, you can manually set the time and date if needed, or adjust the time zone.

1. Peze epi kenbe la SET button for approximately 3 seconds to enter time setting mode. The digit to be set will flash.
2. Sèvi ak la UP or DESANN buttons to adjust the flashing value (e.g., time zone, 12/24 hour format, hour, minute, year, month, date).
3. Peze a SET button again to confirm the current setting and move to the next setting item.
4. Repeat steps 2 and 3 until all desired settings are configured.
5. The clock will automatically exit setting mode if no button is pressed for approximately 15 seconds.

6.2 Mete alam la

1. Peze epi kenbe la AL.SET button for approximately 3 seconds to enter alarm setting mode. The alarm hour will flash.
2. Sèvi ak la UP or DESANN bouton pou ajiste lè alam la.
3. Peze AL.SET ankò pou konfime lè a epi ale nan paramèt minit alam lan.
4. Sèvi ak la UP or DESANN bouton pou ajiste minit alam la.
5. Peze AL.SET again to confirm and exit alarm setting mode.

6.3 Aktive/Dezaktive Alam lan

Yon ti tan peze la AL.SET bouton pou aktive oubyen dezaktive alam lan. Yon ikòn alam ap parèt sou ekran an lè alam lan aktif.

6.4 Repete Fonksyon

Lè alam la sonnen, manyen la ON/OFF area (or any button, depending on model variation) on the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes. To completely stop the alarm, press the UP bouton.

6.5 Backlight and Night Light

• Instant Backlight: Manyen yon ti tan ON/OFF area on the top of the clock to activate the bright white LED backlight. It will illuminate for a few seconds and then turn off automatically.
• Mòd limyè lannwit: Peze epi kenbe la ON/OFF area for approximately 3 seconds to activate a continuous, dim night light. Repeat this action to turn off the night light.

6.6 Seleksyon Inite Tanperati

Yon ti tan peze la DESANN button to switch between Celsius (°C) and Fahrenheit (°F) temperature display.

7. Antretyen

• Netwayaj: Wipe the clock's surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Ranplasman batri: When the display dims or the clock stops functioning, replace all 3 AAA batteries with new ones. Ensure correct polarity.
• Depo: Si w ap sere revèy la pou yon peryòd tan pwolonje, retire pil yo pou anpeche likid koule.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

Explore Scientific products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Explore Scientific website. If you encounter any issues not covered in this manual, or require further assistance, please contact Explore Scientific customer support.

Pou dènye enfòmasyon ak sipò, tanpri vizite: www.explorescientific.com