Manyèl Itilizatè Reseptè PoE Bidireksyonèl Kramer TP-789R 4K60 4:2:0 HDMI HDCP 2.2

1. Entwodiksyon

The Kramer TP-789R is a high-performance HDBaseT receiver designed for extending 4K60Hz (4:2:0) HDMI, RS-232, and IR signals over twisted pair cabling. This device supports bidirectional Power over Ethernet (PoE), allowing it to either supply power to a PoE acceptor device or receive power from a remote PoE provider. It extends video signals up to 40 meters (130 feet) for 4K@60Hz (4:2:0) resolution and up to 70 meters (230 feet) for 1080p HD video resolutions over Kramer copper cables. This manual provides essential information for the proper installation, operation, and maintenance of your TP-789R receiver.

2. Karakteristik kle

HDBaseT 1.0 receiver for reliable signal extension.
Supports bidirectional PoE (Power over Ethernet/HDBaseT) for flexible power solutions.
Extends 1080p signals up to 70 meters (230 feet).
Extends 4K@60Hz (4:2:0) signals up to 40 meters (130 feet).
Includes control extension capabilities for RS-232 and IR signals.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

Kramer TP-789R Receiver Unit
Adaptè kouran (si w pa itilize PoE)
Twous Support Mounting
Gid Quick Start

4. Deskripsyon Fizik

Familiarize yourself with the ports and indicators on the TP-789R receiver.

Kramer TP-789R front and rear panel view

Figi 1: Front and Rear Panels of the Kramer TP-789R Receiver. The image displays the compact black casing of the TP-789R, with the Kramer DigiTOOLS logo on the top. The front panel shows DIP switches for setup, and LED indicators for IN, OUT, LINK, POE, and ON/FEEDER status. The rear panel features an HDBT IN port (RJ-45), HDMI OUT port, IR port, RS-232 terminal block, and a 48V DC power input.

4.1 Panèl devan

ENSTALASYON Entèriptè DIP yo: Used for configuring device settings. Refer to the detailed setup guide for specific configurations.
NAN dirije: Indicates incoming HDBaseT signal.
SOTI LED: Indicates outgoing HDMI signal.
Lyen ki ap dirije: Indicates HDBaseT link status.
POE LED: Indicates Power over Ethernet status.
ON/FEEDER LED: Indicates power status and PoE feeding activity.

4.2 Panèl dèyè

HDBT NAN: RJ-45 connector for HDBaseT input from a compatible transmitter.
HDMI SOTI: HDMI connector for connecting to a display device.
IR: 3.5mm jack for IR receiver/emitter connection.
AK-232-RS Terminal block for serial control communication.
48V DC: Power input for external power adapter (if not using PoE).

5. Enstalasyon ak Enstalasyon

Follow these steps to properly set up your Kramer TP-789R receiver.

5.1 Dyagram Koneksyon

Figi 2: Typical Connection Diagram for Kramer TP-789R. This diagram illustrates the connection of a Blu-ray Player (HDMI source) to a Kramer WP-20 wall plate (HDBaseT transmitter) via HDMI and RS-232. The WP-20 then connects to the TP-789R receiver via HDBaseT (Cat cable), which also carries PoE. The TP-789R outputs HDMI to a display and RS-232 to a control device (SL-240C). An optional external power supply can be connected to the TP-789R.

5.2 Etap enstalasyon yo

Aparèy koupe pouvwa: Ensure all devices, including the TP-789R, source, and display, are powered off before making any connections.
Connect HDBaseT Cable: Connect a Cat cable (e.g., Cat 6a) from the HDBaseT output of a compatible transmitter (e.g., Kramer WP-20) to the HDBT IN port on the TP-789R. Ensure the cable length is within the specified limits (up to 40m for 4K, 70m for 1080p).
Konekte Sòti HDMI a: Konekte yon kab HDMI nan HDMI SOTI port on the TP-789R to the HDMI input of your display device (e.g., TV, projector).
Connect Control (Optional):
- For RS-232 control, connect your control system to the RS-232 blòk tèminal.
- For IR control, connect an IR emitter/receiver to the IR pò.
Koneksyon pouvwa:
- If using PoE, ensure your HDBaseT transmitter or network switch is providing power and the POE LED is on.
- If using an external power adapter, ensure it is correctly connected and the power outlet is functional.
Pouvwa sou: Power on all connected devices. The LEDs on the TP-789R should illuminate to indicate proper connection and operation.

5.3 Konfigirasyon switch DIP

The SETUP DIP switches on the front panel are used for advanced configuration. Refer to the Kramer TP-789R product page or full user manual on the Kramer website for detailed information on DIP switch settings for EDID management, HDBaseT modes, and other functionalities.

6. Operasyon Enstriksyon

Once properly installed, the TP-789R operates largely automatically. Ensure your source device is outputting a compatible HDMI signal and your display is set to the correct input.

Transmisyon siyal: The TP-789R will automatically detect the incoming HDBaseT signal and convert it to HDMI for your display.
Endikatè ki ap dirije: Monitor the front panel LEDs (IN, OUT, LINK, POE) to confirm active connections and power status. A solid LINK LED indicates a stable HDBaseT connection.
Kontwòl Transmisyon: RS-232 and IR signals are passed bidirectionally (if supported by the transmitter) allowing control of source or display devices from either end of the extension.

7. Antretyen

The Kramer TP-789R is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

Netwayaj: Use a soft, dry cloth to clean the unit. Do not use liquid or aerosol cleaners.
Vantilasyon: Asire w ke gen ase sikilasyon lè toutotou aparèy la. Pa bloke ouvèti vantilasyon yo.
Anviwònman: Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures, direct sunlight, and moisture.
Mizajou mikrolojisyèl: Tcheke Kramer la regilyèman. websit la pou nenpòt mizajou firmwèr ki disponib pou amelyore pèfòmans oswa nouvo fonksyonalite.

NAN. Depanaj

If you encounter issues with your TP-789R, refer to the following common problems and solutions:

Pwoblèm	Kòz posib / Solisyon
Pa gen okenn pwodiksyon videyo sou ekran an.	Check all HDMI and HDBaseT cable connections. Ensure the TP-789R and all connected devices are powered on. Verifye ke ekran an configuré sou bon antre HDMI a. Check the LINK LED on the TP-789R; if off, there's no HDBaseT link. Test with a shorter HDBaseT cable or a different cable. Ensure the source device is outputting a compatible resolution.
Intermittent video or flickering.	Check HDBaseT cable quality and termination. Use high-quality Cat 6a or higher. Ensure cable length is within specifications. Verify power supply is stable (if not using PoE, check adapter). Reduce resolution or refresh rate if possible to test stability.
Pa gen pouvwa nan inite a.	If using PoE, ensure the HDBaseT transmitter or switch is providing power and the POE LED is on. If using an external power adapter, ensure it is correctly connected and the power outlet is functional. Check the ON/FEEDER LED.
Control signals (RS-232/IR) not working.	Verify control cable connections are correct. Ensure the control devices are properly configured. Check if the HDBaseT transmitter also supports control pass-through.

9. Espesifikasyon

Technical specifications for the Kramer TP-789R receiver:

Karakteristik	Detay
Modèl	TP-789R
Mak	Kramer
Koneksyon Teknoloji	Ethernet, HDMI
Kalite Connector	HDMI, RJ45
Rezolisyon videyo	Jiska 4K @ 60Hz (4:2:0)
Max Extension (4K@60Hz)	40m (130ft) over Kramer copper cables
Max Extension (1080p)	70m (230ft) over Kramer copper cables
Sipò PoE	Bidirectional (Power over HDBaseT)
Ekstansyon kontwòl	RS-232, IR
Audio Sòti Mode	Stereo
Konfigirasyon chanèl son antoure	2.2
Pwa atik	200 gram (7.1 ons)
Koulè	Nwa
Manifakti	Kramer
Dat Premye Disponib	7 novanm 2019

10. Garanti ak sipò

Kramer products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Kramer website. For technical support, product registration, or to download the latest drivers and firmware, please visit the Kramer Support Page or contact your local Kramer representative.

Enfòmasyon pou kontakte:

Websit: www.kramerav.com
Sipò: kramerav.com/us/support

	Manyèl Itilizatè Ekstendè HDMI Kramer WP-789T, WP-789R, TP-789R, TP-789Rxr HDBaseT Manyèl itilizatè konplè pou transmetè ak reseptè liy HDMI Kramer WP-789T, WP-789R, TP-789R, ak TP-789Rxr HDBaseT. Li kouvri enstalasyon, konfigirasyon, koneksyon, espesifikasyon teknik, ak enfòmasyon sou garanti.
	Manyèl Itilizatè Ekstansyon Liy HDMI Kramer TP-583Txr/Tx ak TP-583Rxr/R Manyèl itilizatè pou Transmetè Liy HDMI Kramer TP-583Txr, TP-583T ak Reseptè Liy HDMI TP-583Rxr, TP-583R, ki detaye karakteristik, espesifikasyon, enstalasyon, ak kontwòl pou pwolonje siyal HDMI sou HDBaseT.
	Manyèl Itilizatè Ekstendè Kramer EXT3-C-XR-T ak EXT3-POE-XR-R 4K60 Manyèl itilizatè konplè pou Transmetè Kramer EXT3-C-XR-T 4K60 USB-C ak Reseptè HDMI/USB EXT3-POE-XR-R 4K60, ki kouvri enstalasyon, koneksyon, espesifikasyon ak depanaj.
	Gid demaraj rapid pou ekstansyon switch USB HDMI Kramer EXT3-21-XR-TR 4K60 Gid demaraj rapid pou Kramer EXT3-21-XR-TR a, yon ekstansyon switch 4K60 HDMI ak USB 2x1. Aprann plis sou enstalasyon, koneksyon ak operasyon.
	Gid demaraj rapid Kramer TP-583Txr/TP-583Rxr: Enstalasyon ak konfigirasyon This Quick Start Guide from Kramer provides essential information for installing and using the TP-583Txr HDMI Line Transmitter and TP-583Rxr HDMI Line Receiver. It covers box contents, device identification, installation methods, connection diagrams, RJ-45 pinout, DIP-switch configurations, and power connection for 4K HDR HDMI 2.0 over HDBaseT systems.
	Kramer EXT3-H-POE-T Transmitter / EXT3-H-POE R Receiver User Manual User manual for the Kramer EXT3-H-POE-T Transmitter and EXT3-H-POE R Receiver, detailing features, specifications, installation, and operation of these HDBaseT 3.0 extension devices.

Kramer TP-789R