Mesqool Loud Alarm Clock with Bed Shaker

Entwodiksyon

The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.

Ki sa ki nan bwat la

• Revèy ki byen fò
• Kabann Shaker
• Manyèl itilizatè
• Adaptè pouvwa
• 1.5 mèt kab

Enstalasyon

Alimente revèy la

1. Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
2. Plug the Power Adapter into a standard electrical outlet. The display will light up.
3. For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.

Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.

Connecting the Bed Shaker

4. Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
5. Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.

Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.

Enstriksyon Operasyon

Mete tan an

• Peze epi kenbe la METE TAN button on the top panel. The hour digits will begin to flash.
• Sèvi ak la + or - bouton pou ajiste lè a.
• Peze METE TAN again to confirm the hour and move to minute adjustment. The minute digits will flash.
• Sèvi ak la + or - bouton pou ajiste minit yo.
• Peze METE TAN one more time to save the time setting.
• Pou chanje ant fòma 12 èdtan ak 24 èdtan, peze bouton an 12/24H bouton.
• To activate or deactivate Daylight Saving Time (DST), press the DST bouton.

Setting Alarms (AL1 & AL2)

Revèy la sipòte de alam endepandan (AL1 ak AL2).

• Peze epi kenbe la AL1 or AL2 bouton. Chif lè alam lan ap flache.
• Sèvi ak la + or - bouton yo pou mete lè alam ou vle a.
• Peze AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
• Sèvi ak la + or - bouton yo pou mete minit alam ou vle yo.
• Peze AL1 or AL2 yon lòt fwa ankò pou sove paramèt alam lan.
• To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
• To adjust the alarm volume, use the VOLIM ALARM slide switch on the side of the clock (Low, Medium, High).

Figi 3: Side view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.

Fonksyon Snooze

• Lè alam lan sonnen, peze gwo bouton an SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
• Pou etenn alam lan nèt, peze bouton an ALAM OFF bouton.

Figure 4: The prominent snooze button on top of the alarm clock for easy access.

Limyè lannwit ak gradateur

• The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
• The 7-inch LED display has a full slider dimmer (0%-100%). Use the DIMMER slide switch on the side of the clock to adjust the display brightness to your preference.

Figure 5: The alarm clock showcasing its 7-color night light options.

Doub USB chaje pò

• The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
• Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.

Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.

Antretyen

• Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Asire w ke aparèy la dekonekte anvan w netwaye.
• Kenbe aparèy la lwen dlo ak imidite ki wo.

Depanaj

No Display / Power Issue

• Check if the power adapter is securely plugged into both the clock and the wall outlet.
• Ensure the wall outlet is functioning correctly by plugging in another device.
• If using battery backup, ensure batteries are correctly inserted and not depleted.

Alarm Not Sounding/Vibrating

• Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
• Tcheke la BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
• Ajiste a VOLIM ALARM slide switch to a higher setting if the buzzer is too quiet.
• Ensure the bed shaker is properly connected to its port.

Display Too Bright/Dim

• Sèvi ak la DIMMER slide switch on the side of the clock to adjust the display brightness.

Espesifikasyon