1. Entwodiksyon
Welcome to the Yedoo S2016 Scooter user manual. This document provides essential information for the safe assembly, operation, and maintenance of your new scooter. Please read it thoroughly before first use to ensure optimal performance and safety.
2. Enstriksyon Sekirite Enpòtan
Sekirite ou pi enpòtan. Swiv direktiv sa yo:
- Toujou mete yon kas ak ekipman pwoteksyon apwopriye (pwoteksyon jenou, pwoteksyon koud, pwoteksyon ponyèt) lè w ap monte bisiklèt.
- Regularly inspect the scooter before each ride, checking brakes, tire pressure, and all fasteners.
- Pa depase kapasite pwa maksimòm lan 150 kg (330 liv).
- Avoid riding in heavy traffic, on slippery surfaces, or in adverse weather conditions.
- This scooter is designed for adults. Children should only use it under direct adult supervision.
- Be aware of your surroundings and other pedestrians or vehicles.
- Do not modify the scooter in any way, as this may compromise its safety and void the warranty.
3. Pake kontni
Please verify that all the following components are present in your Yedoo S2016 package:
- Yedoo S2016 Scooter Frame
- Front Wheel (20 inch)
- Rear Wheel (16 inch)
- Asanble gidon
- Quick Release Levers (for wheels)
- Allen Key (for handlebar adjustment)
- Manyèl Itilizatè (dokiman sa a)
4. Enstriksyon Asanble
The Yedoo S2016 scooter requires minimal assembly. Follow these steps carefully to ensure proper setup.
4.1. Attaching the Front Wheel
Insert the front wheel into the fork. Align the wheel axle with the dropouts on the fork. Secure it using the provided quick-release lever. Ensure the wheel is centered and spins freely without rubbing against the brake pads.

Image: Fully assembled Yedoo S2016 Scooter in black, shown from the side. This illustrates the final appearance after assembly.
4.2. Enstale Guidon yo
Insert the handlebar stem into the head tube of the scooter frame. Ensure the handlebars are facing forward and are aligned with the front wheel. Tighten the stem bolt securely using the appropriate tool (usually an Allen key) to prevent any rotation or movement during use.

Imaj: Devan view of the Yedoo S2016 Scooter in black, highlighting the handlebar and front wheel assembly.
4.3. Adjusting Handlebar Height
The handlebar height can be adjusted to suit your preference. Loosen the quick-release clamp or bolt on the stem, adjust the handlebar to a comfortable height (between 92-98 cm from the ground), and then securely tighten the clamp/bolt. Ensure the handlebars are at a height that allows for comfortable and controlled steering.
5. Konpozan souview
Familiarize yourself with the main components of your Yedoo S2016 Scooter:

Image: Technical diagram of the Yedoo S2016 Scooter showing key dimensions including overall length (149 cm), handlebar width (64 cm), handlebar height range (92-98 cm), and wheel sizes (20 inch front, 16 inch rear).
- Guidon: Pou direksyon ak kontwòl.
- Levye fren yo: Located on the handlebars, control the front and rear brakes.
- Ankadreman: The main structure of the scooter, made from alloy steel.
- Footboard: The platform where you stand, featuring an anti-slip surface.
- Wou: 20-inch front wheel and 16-inch rear wheel with wide tires for various terrains.
- Quick Release Levers: Allow for easy removal of wheels for transport or storage.
6. Operating Your Yedoo S2016 Scooter
6.1. Riding Position
Place one foot firmly on the footboard, close to the front. Use your other foot to push off the ground, gaining momentum. Once moving, place both feet on the footboard, one behind the other, or side-by-side if comfortable, ensuring balance.
6.2. frenaj
To slow down or stop, gently and evenly squeeze both brake levers. Avoid sudden braking, especially at high speeds, to prevent loss of control. Practice braking in a safe, open area before riding in more challenging environments.
6.3. Footboard Height Adjustment
The Yedoo S2016 features a two-position adjustable footboard. The lower position is ideal for smooth roads, reducing effort when pushing. The higher position provides increased ground clearance, suitable for rougher terrain or off-road riding. Consult the scooter's frame near the rear wheel for the adjustment mechanism.

Image: A person riding the Yedoo S2016 Scooter (blue/grey variant) on a dirt path, demonstrating typical riding posture and use on varied terrain.
7. Antretyen ak Swen
Regular maintenance will extend the life of your scooter and ensure safe operation.
7.1. Netwayaj
Clean your scooter regularly with a damp cloth and mild soap. Avoid using harsh chemicals or high-pressure washers, which can damage components or bearings. Dry thoroughly after cleaning.
7.2. Presyon kawotchou
Maintain proper tire pressure as indicated on the tire sidewall (typically 45-65 PSI). Check pressure before each ride using a bicycle pump with a pressure gauge. Correct tire pressure ensures optimal performance, comfort, and tire longevity.
7.3. Ajisteman fren
Periodically check the brake pads for wear and ensure the brake cables are taut. If brakes feel loose or ineffective, adjust the cable tension at the brake levers or calipers. Replace worn brake pads promptly.
7.4. Enspeksyon jeneral
Before each ride, quickly inspect all bolts, nuts, and quick-release levers to ensure they are securely tightened. Check for any signs of damage, cracks, or unusual play in moving parts. Lubricate moving parts like brake pivots and wheel axles as needed.
NAN. Depanaj
This section addresses common issues you might encounter with your Yedoo S2016 Scooter.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Brakes feel weak or unresponsive. | Worn brake pads, loose brake cable, misaligned calipers. | Check brake pad wear and replace if necessary. Adjust brake cable tension. Realign brake calipers. |
| Squeaking noise from wheels. | Dry bearings, dirt in bearings, loose wheel axle. | Clean and lubricate wheel bearings. Ensure quick-release levers are tight. |
| Handlebars feel loose or rotate. | Stem bolt or quick-release clamp se lach. | Tighten the stem bolt and/or quick-release clamp securely using the Allen key. |
| Tires lose air quickly. | Puncture, valve stem issue, improper seating. | Inspect tires for punctures and repair/replace inner tube. Check valve stem for leaks. Ensure tire is properly seated on the rim. |
9. Espesifikasyon teknik
Detailed specifications for the Yedoo S2016 Scooter:
| Karakteristik | Spesifikasyon |
|---|---|
| Non modèl | Yedoo S2016 (Yedoo Steel 2016 Black) |
| Nimewo Modèl | 12404 |
| Materyèl ankadreman | Alloy Steel |
| Gwosè wou | Front: 20 inches, Rear: 16 inches (with wide tires) |
| Kapasite chaj maksimòm | 150 kg (330 liv) |
| Wotè gidon reglabl | Yes, 92 - 98 cm (36.2 - 38.6 inches) |
| Dimansyon pwodwi (L x W x H) | 149 cm x 64 cm x 92-98 cm (58.7 x 25.2 x 36.2-38.6 inches) |
| Pwa pwodwi | 9.0 kg (19.8 liv) |
| Karakteristik espesyal | Wide platform, Adjustable handlebar height, Anti-slip footboard surface, Two-position footboard for varied terrain. |
| Laj Rekòmande | Granmoun |
10. Garanti ak Sipò Kliyan
The Yedoo S2016 Scooter comes with a 3-ane garanti from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your retailer or visit the official Yedoo website. Detailed contact information can usually be found on the product packaging or the retailer's websit.
Nòt: Pa gen okenn videyo ofisyèl vandè ki te jwenn pou pwodui sa a.



