Huskie Tools REC-B6510 12 Ton Compression Tool Kit User Manual

1. Pwodwi souview

The Huskie Tools REC-B6510 is a 12-ton battery-operated compression tool designed for crimping electrical connectors. It is engineered for single-handed operation, making it suitable for overhead applications and situations where one hand is needed to manage the work piece. This tool eliminates the need for external hoses and heavy equipment, offering enhanced portability and ease of use.

Karakteristik kle yo enkli:

• Operasyon yon sèl men: Facilitates use in challenging environments.
• Tested Up to 75kV: Ensures safety in high-voltage aplikasyon yo.
• Rotational Head: Provides flexibility for various crimping angles.
• Rapid Advance System: Reduces crimp cycle time, increasinefikasite g.
• Ergonomically Balanced: Designed for user comfort and reduced fatigue.
• Wide Jaw Opening: 1.65" opening accommodates mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al.
• Die Compatibility: Accepts all standard "U" type dies.
• Bypass otomatik: A built-in 10,000 psi bypass cartridge audibly signals when optimal pressure is reached.

2. Enfòmasyon enpòtan sou sekirite

Li epi konprann tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon ki vini ak zouti elektrik sa a. Si ou pa swiv tout enstriksyon ki anba yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

• Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and protective clothing.
• Asire w ke zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan.
• Pa opere zouti elektrik nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz, oswa pousyè.
• Kenbe timoun yo ak moun ki t ap gade yo lwen pandan w ap opere yon zouti elektrik. Distraksyon ka lakòz ou pèdi kontwòl.
• Evite demaraj aksidantèl. Asire w ke switch la nan pozisyon "off" anvan ou konekte l ak pake batri a, anvan ou ranmase l oswa anvan ou pote zouti a.
• Pa depase. Kenbe bon pye ak balans tout tan. Sa a pèmèt pi bon kontwòl zouti pouvwa a nan sitiyasyon inatandi.
• Dekonekte pake batri a soti nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje Pwodwi pou Telefòn, oswa estoke zouti elektrik.
• Sèvi ak zouti elektrik la, Pwodwi pou Telefòn ak zouti Bits elatriye an akò ak enstriksyon sa yo, pran an kont kondisyon travay yo ak travay la yo dwe fèt.
• Kenbe zouti elektrik ak Pwodwi pou Telefòn. Tcheke pou move aliyman oswa obligatwa nan pati k ap deplase, rupture nan pati ak nenpòt lòt kondisyon ki ka afekte operasyon zouti elektrik la.
• Only use battery packs and chargers specified by the manufacturer.

3. Pwodwi konpozan

Familiarize yourself with the main parts of your REC-B6510 compression tool:

Figure 1: Huskie Tools REC-B6510 12 Ton Compression Tool. This image displays the complete tool, featuring its blue and black housing, the crimping head, trigger, and battery compartment.

• Crimping Head: The front part of the tool where dies are inserted and the crimping action occurs. It features a rotational design for versatility.
• Die Retainer Pin: Secures the crimping dies in place.
• Chanjman deklanche: Activates the hydraulic pump for crimping.
• Bouton Retounen: Releases hydraulic pressure to retract the ram and open the dies.
• Manch/Priz: Fèt ergonomikman pou yon manyen konfòtab ak an sekirite.
• Lòj batri: Located at the base of the handle, houses the Lithium-Ion battery.
• Pake batri: Provides power to the tool. (Not visible in main image, but implied)
• Charger: Used to recharge the battery pack. (Not visible in main image, but implied)

4. Enstalasyon ak Preparasyon

4.1 Chaje batri a

1. Ensure the battery charger is connected to a suitable power outlet.
2. Insert the battery pack into the charger. The charger's indicator light will show the charging status.
3. Allow the battery to fully charge before first use. Refer to the charger's manual for specific charging times and indicators.
4. Yon fwa li chaje, retire batri a nan plato a.

4.2 Enstale batri a

1. Ensure the tool's trigger is not engaged.
2. Align the charged battery pack with the battery compartment at the base of the tool's handle.
3. Glise pake batri a byen fèm nan plas li jiskaske li fè yon klik, sa ki endike li byen bloke.
4. To remove, press the battery release button (if present) and slide the battery out.

4.3 Installing Dies

1. Ensure the tool is off and the battery is removed for safety.
2. Retract the ram fully by pressing the return button.
3. Open the die retainer pin or mechanism on the crimping head.
4. Insert the appropriate "U" type dies for the specific connector and cable size you are working with.
5. Close and secure the die retainer pin. Ensure dies are properly seated and aligned.

5. Operasyon Enstriksyon

5.1 Verifikasyon Pre-Operasyon

• Verify the correct dies are installed for the application.
• Asire w ke batri a byen chaje epi li byen enstale.
• Inspect the tool for any visible damage or loose parts.
• Confirm the work piece (cable and connector) is clean and prepared according to manufacturer specifications.

5.2 Performing a Crimp

1. Open the crimping head by pressing the return button until the dies are fully retracted.
2. Position the cable and connector within the open dies. Ensure the connector is properly seated and aligned for the crimp.
3. If necessary, rotate the crimping head to achieve the optimal working angle.
4. Press and hold the trigger switch. The dies will advance rapidly until they contact the connector, then slow down as crimping pressure builds.
5. Continue holding the trigger until the tool's internal bypass system audibly "bypasses" (a distinct click or hiss), indicating that optimal crimping pressure has been reached.
6. Lage switch la deklanche.
7. Press the return button to retract the ram and open the dies.
8. Remove the crimped connector and inspect the crimp for quality and completeness.

5.3 Single-Handed Operation

The REC-B6510 is designed for single-handed use. This allows the operator to hold the tool with one hand while the other hand is free to position the cable or connector, particularly useful in overhead or confined spaces. Ensure a firm grip and stable footing when operating with one hand.

6. Antretyen ak Swen

6.1 Netwayaj jeneral

• After each use, wipe down the tool with a clean, dry cloth to remove dirt, dust, and debris.
• Pay special attention to the crimping head and die areas to prevent accumulation that could affect performance.
• Do not use harsh chemicals or solvents that could damage the tool's housing or internal components.

6.2 Swen ak Depo Batri

• Sere pil yo nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
• Pa sere pil yo dechaje pou yon bon bout tan. Rechaje yo detanzantan si w pa ap itilize yo.
• Avoid dropping or physically damaging battery packs.
• If a battery pack becomes hot during use or charging, discontinue use and allow it to cool before handling.

6.3 Die Maintenance

• Keep dies clean and free of debris.
• Inspect dies regularly for wear, cracks, or damage. Replace worn or damaged dies immediately to ensure proper crimps.
• Lightly lubricate dies with a suitable non-conductive lubricant if recommended by the manufacturer.

6.4 Sèvis Pwofesyonèl

For internal repairs or hydraulic system maintenance, contact authorized Huskie Tools service centers. Attempting to service the tool yourself may void the warranty and could lead to injury or damage to the tool.

NAN. Depanaj

This section addresses common issues you might encounter with your REC-B6510 tool. For problems not listed here, contact Huskie Tools customer support.

8. Espesifikasyon teknik

9. Garanti ak sipò

For detailed warranty information, please refer to the warranty card included with your product or visit the official Huskie Tools websit la. Kenbe prèv acha ou pou reklamasyon garanti.

For technical support, service, or to order replacement parts, please contact Huskie Tools customer service:

• Websit: Visit the Huskie Tools Store on Amazon (pou enfòmasyon jeneral sou mak la)
• Refer to your product packaging or included documentation for direct contact information.