Pwodwi souview
The Fire-Lite ES-200X is a sophisticated 198-point addressable fire alarm control panel designed for comprehensive fire and CO detection. It features built-in dual path communications, user-programmable buttons, and supports combined fire and carbon monoxide addressable detection, making it a versatile solution for various safety applications.
Figi 1: Devan view of the ES-200X Intelligent Addressable Fire Alarm Control Panel, showing the red enclosure and the central control interface with an LCD display and keypad.
Enstalasyon ak Enstalasyon
Proper installation of the ES-200X control panel is crucial for its reliable operation. This section outlines the general steps for setting up the unit.
1. Debalaj ak Enspeksyon
- Carefully remove the ES-200X panel from its packaging.
- Inspect the unit for any signs of shipping damage. Report any damage to the supplier immediately.
- Verifye ke tout konpozan ki nan lis nan fich anbalaj la prezan.
2. Mounting Panel la
- Select a suitable location for mounting, ensuring it is clean, dry, and accessible for maintenance.
- Mount the panel securely to a wall or other stable surface using appropriate fasteners. Ensure the mounting surface can support the panel's weight (approximately 26.9 pounds).
3. Koneksyon fil elektrik
- Connect the primary power source to the panel. The panel is designed for battery-powered operation, but requires AC power for charging and primary operation.
- Connect all addressable devices (detectors, modules, manual pull stations) to the SLC (Signaling Line Circuit) loop. The ES-200X supports up to 198 addressable devices.
- Wire the four built-in, independently programmable NACs (Notification Appliance Circuits) for connecting audible and visual notification appliances (e.g., horns, strobes). The panel supports selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
- Ensure all wiring complies with local electrical codes and NFPA standards.
4. Inisyal Konfigirasyon
- Power on the panel. The integral 80-character LCD display with backlighting will illuminate.
- Utilize the auto-programming (learn mode) feature to automatically detect and assign addresses to connected devices. This feature helps reduce installation time and reports if two devices are set to the same address.
- Configure programmable buttons and system settings as required for your specific application.
- Set the real-time clock/calendar, which includes automatic daylight savings control.
Enstriksyon Operasyon
This section provides guidance on the daily operation of the ES-200X control panel.
1. Understanding the Display and Indicators
The ES-200X features an 80-character LCD display that provides real-time system status, event messages, and programming prompts. Various LED indicators on the panel illuminate to show system conditions such as Alarm, Supervisory, Trouble, and AC Power.
2. Acknowledging Events
- When an event (e.g., alarm, trouble) occurs, the panel's audible signal will activate, and relevant indicators will illuminate.
- Peze a REKONÈT button (typically labeled) to silence the panel's audible signal and acknowledge the event. The event message will remain on the LCD display until resolved.
3. Silansye Alam yo
- After an alarm is acknowledged, the notification appliances (horns, strobes) will continue to activate.
- Peze a SILANS button to deactivate the notification appliances. The panel will remain in an alarm state until reset.
4. Reyajiste sistèm lan
- Once the cause of an alarm or trouble condition has been resolved, the system can be reset.
- Peze a RESET button. The panel will attempt to clear all active alarms and trouble conditions and return to a normal operating state.
- If the condition persists, the panel will re-indicate the alarm or trouble.
5. Using Programmable Buttons
The ES-200X features programmable buttons that can be configured for specific functions, such as activating the ECC-50/100 Emergency Command Center or other custom actions. Refer to the installation manual for detailed programming instructions for these buttons.
Antretyen
Regular maintenance ensures the continued reliability and optimal performance of your ES-200X fire alarm control panel.
1. Routine Inspections
- Chak jou: Observe the panel's LCD display for a "SYSTEM NORMAL" message. Note any active trouble or alarm indicators.
- Chak mwa: Conduct a visual inspection of the panel and connected devices for any physical damage, loose wiring, or obstructions.
- Chak ane: Perform a comprehensive system test, including testing all detectors, manual pull stations, and notification appliances, in accordance with NFPA 72 standards.
2. Antretyen batri
- The panel relies on backup batteries during power outages. Inspect batteries periodically for corrosion or swelling.
- Test battery functionality annually by simulating a power failure and ensuring the system operates on battery power for the required duration. Replace batteries as recommended by the manufacturer or when they fail to hold a charge.
3. Netwayaj
- Keep the panel's exterior clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure ventilation openings are free from dust and debris.
4. Tan senkronizasyon
- The ES-200X features a real-time clock/calendar with automatic daylight savings control. Verify that the date and time displayed on the LCD are accurate during routine checks.
Depanaj
This section provides solutions to common issues you may encounter with the ES-200X control panel. For complex problems, contact qualified service personnel.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Panel does not power up. | No AC power, faulty power supply, disconnected battery, or internal fault. |
|
| System displays "Trouble" message. | Device fault, wiring issue, ground fault, or low battery. |
|
| Alam lan aktive sanzatann. | Actual fire condition, faulty detector, or environmental factors (e.g., dust, steam). |
|
| Auto-programming reports duplicate addresses. | Two or more addressable devices are configured with the same address. |
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Fire-Lite |
| Nimewo Modèl | ES-200X |
| Nimewo Pati | ES-200X |
| UPC | 783008112608 |
| Addressable Device Capacity | 198 points (SLC Loop) |
| NACs (Notification Appliance Circuits) | 4 (Style Z/Class A or Style Y/Class B) |
| Kominikè | Built-in dual path (IPOTS-COM) |
| Ekspozisyon | Integral 80-Character LCD with Backlighting |
| Sous pouvwa | Battery Powered (requires AC for charging/primary) |
| Koulè | Wouj |
| Pwa atik | 26.9 liv |
| Dimansyon pake | 23 x 20 x 7 pous |
| Batri enkli? | Non |
| Dat Premye Disponib | 4 septanm 2019 |
Garanti ak sipò
For detailed warranty information regarding your ES-200X Intelligent Addressable Fire Alarm Control Panel, please refer to the documentation provided with your purchase or visit the official Fire-Lite website. Warranty terms and conditions typically cover manufacturing defects and vary by region.
For technical support, service, or inquiries about replacement parts, please contact Fire-Lite customer service or an authorized Fire-Lite distributor. Contact information can usually be found on the manufacturer's official websit oswa nan anbalaj pwodwi a.
It is recommended that all installation, maintenance, and troubleshooting beyond basic operations be performed by qualified and certified fire alarm technicians to ensure compliance with safety standards and proper system functionality.
