Jectse VFD 220V AC 2.2KW Frequency Converter Instruction Manual

1. Pwodwi souview

The Jectse VFD 220V AC 2.2KW Frequency Converter is designed for precise motor speed control. This device converts single-phase AC input into a variable frequency single-phase AC output, enabling efficient and controlled operation of compatible motors. It features vector control technology for enhanced performance.

Figure 1.1: Jectse VFD 2.2KW Frequency Converter, front-right view. This image displays the Jectse VFD 2.2KW Frequency Converter from a front-right perspective, showing the control panel, ventilation grilles, and side casing.

Figure 1.2: Jectse VFD 2.2KW Frequency Converter, front-left view. A front-left view of the Jectse VFD 2.2KW Frequency Converter, highlighting the control panel and the left side of the unit.

Figure 1.3: Jectse VFD 2.2KW Frequency Converter, alternative angle. An additional view of the Jectse VFD 2.2KW Frequency Converter, providing further visual detail of the unit's casing and design.

2. Prekosyon sekirite

Read all safety instructions carefully before installation, operation, or maintenance. Failure to comply may result in serious injury or equipment damage.

• Always disconnect power before wiring or performing any maintenance.
• Ensure the VFD is properly grounded.
• Do not install the inverter in environments with flammable gases or explosive atmospheres.
• Only qualified professionals should perform wiring and maintenance due to high voltage andedan inite a.
• Avoid opening the shell unless specifically instructed for maintenance by qualified personnel.

Figi 2.1: Side view with safety precautions label. This image shows the side of the VFD with a label detailing important safety precautions.

Figure 2.2: Multi-language safety warning. An image displaying a multi-language warning about product safety, advising users to read instructions and check age ranges before use.

3. Enstalasyon ak Enstalasyon

3.1 Debalaj ak enspeksyon

Upon receiving the VFD, carefully unpack it and inspect for any signs of damage during transit. Verify that all components are present according to the packing list (not provided in this manual).

3.2 Montaj

Mount the VFD in a clean, dry, and well-ventilated area, away from direct sunlight, excessive dust, corrosive gases, or vibrations. Ensure adequate clearance around the unit for proper heat dissipation.

Figure 3.1: VFD in an industrial setting. The VFD unit is depicted in what appears to be an industrial or workshop environment, suggesting suitable installation locations.

3.3 fil elektrik

All wiring must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the power supply matches the VFD's input requirements (220V AC, single phase). Connect the motor to the VFD's output terminals. Proper grounding is essential.

• Antre pouvwa: Connect 220V AC single-phase power to the designated input terminals.
• Koneksyon motè: Connect the motor to the VFD's output terminals (U, V, W).
• Atè: Connect the ground terminal of the VFD to a reliable earth ground.

Figi 3.2: Dèyè view of the VFD. A view of the rear panel of the Jectse VFD 2.2KW Frequency Converter, showing connection terminals and mounting points for wiring.

4. Operasyon Enstriksyon

The VFD features a user-friendly control panel for setting parameters and controlling motor operation.

Figure 4.1: VFD Control Panel. Close-up view of the VFD's control panel, featuring the digital display, function buttons (DISP, PROG, FUNC/DATA), directional arrows, and the RUN/STOP/RESET rotary knob.

4.1 Fonksyon Panel Kontwòl

• Ekspozisyon (DISP): Toggles between different display modes (e.g., frequency, current, voltagak).
• Program (PROG): Enters or exits parameter setting mode.
• Function/Data (FUNC/DATA): Selects parameters or confirms data entry.
• Flèch anwo/desann: Navige nan paramèt yo oubyen ajiste valè yo.
• FWD/REV: Changes motor rotation direction (Forward/Reverse).
• RUN Knob: Starts motor operation.
• Bouton STOP/RESET: Stops motor operation or resets fault conditions.

4.2 Operasyon debaz

1. Pouvwa sou: Ensure all connections are secure, then apply power to the VFD.
2. Anviwònman paramèt: Use the PROG button to enter parameter mode. Navigate with arrow keys and adjust values with FUNC/DATA and arrow keys. Refer to the detailed parameter manual (if available) for specific settings.
3. Kòmanse motè: Turn the RUN knob to initiate motor operation.
4. Ajiste vitès: Use the rotary knob or programmed settings to adjust the output frequency and thus the motor speed.
5. Sispann motè a: Press the STOP/RESET button to halt motor operation.

5. Antretyen

Regular maintenance ensures optimal performance and extends the lifespan of your VFD.

• Netwayaj: Periodically clean the VFD's exterior and ventilation openings to prevent dust accumulation, which can hinder heat dissipation. Use a soft, dry cloth. Do not use liquid cleaners.
• Enspeksyon: Enspekte koneksyon fil elektrik yo regilyèman pou wè si yo byen sere epi si gen siy itilizasyon oswa domaj. Tcheke pou nenpòt bri oswa odè dwòl pandan w ap opere.
• Anviwònman: Asire w ke anviwònman operasyon an rete nan limit tanperati ak imidite espesifye yo.

Figure 5.1: VFD internal components. This image shows the VFD unit against a stylized blue circuit board background, hinting at its internal electronic complexity and the need for careful handling during maintenance.

NAN. Depanaj

Seksyon sa a bay konsèy pou pwoblèm komen. Pou pwoblèm konplèks, kontakte pèsonèl sèvis kalifye.

7. Espesifikasyon

Figure 7.1: VFD model and specification label. A side view of the VFD, clearly showing the safety precautions label and a label with model information (XSY-AT2) and electrical specifications.

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the manufacturer's official documentation or contact Jectse customer service directly. Keep your purchase receipt for warranty claims.