Vileda JetClean 3-in-1 Vacuum and Floor Cleaner Instruction Manual

Entwodiksyon

The Vileda JetClean 3-in-1 is designed to simplify your floor cleaning routine by vacuuming, wiping, and drying hard floors in a single pass. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your appliance.

Enfòmasyon sou Sekirite

Please read and understand all safety instructions before operating the Vileda JetClean. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Read all instructions thoroughly before first use.
• Pa plonje aparèy la nan dlo oswa nan lòt likid.
• Kenbe aparèy la lwen timoun ak bèt kay.
• Sèvi ak sèlman avèk volim espesifye atage jan sa endike sou etikèt pwodwi a.
• Toujou debranche aparèy la nan priz kouran an anvan ou netwaye li, fè antretyen li, oswa lè w pa ap itilize li.
• Do not use the appliance on carpets or rugs. It is designed for hard floors only.
• Do not pick up flammable or combustible liquids, or anything that is burning or smoking.
• Pa sèvi avè l si kòd la oswa ploge a domaje. Si aparèy la pa fonksyone jan li ta dwe, si li tonbe atè, domaje, kite l deyò, oswa si li tonbe nan dlo, retounen li nan yon sant sèvis.

Kontni pake

Please ensure all the following items are present in your Vileda JetClean package:

• JetClean Hard Floor Cleaner Main Unit
• 1 Microfibre Roller
• 1 Filtre
• Parking and Cleaning Station
• Water Tank (Clean Water Tank)
• Manyèl itilizatè

Enstalasyon

Follow these steps to assemble your Vileda JetClean before first use:

1. Tache manch lan: Insert the handle into the main unit until it clicks securely into place. Ensure it is firmly seated to prevent detachment during operation.
2. Ranpli tank dlo pwòp la: Remove the clean water tank from the appliance. Fill it with clean tap water. A non-foaming cleaning solution specifically designed for floor cleaners can be added if desired, following the solution's instructions. Reinsert the tank securely into the appliance.
3. Konekte pouvwa: Dewoule kòd kouran an epi branche li nan yon priz elektrik ki apwopriye.

Enstriksyon Operasyon

The Vileda JetClean offers a comprehensive 3-in-1 cleaning process: vacuuming, wiping, and drying.

Operasyon debaz

1. Pouvwa sou: Press the power button, usually located on the handle, to start the appliance.
2. Vacuuming (Forward Motion): Push the JetClean forward across the floor. The appliance will vacuum loose particles, dust, and even liquids.
3. Wiping (Water Dispense): While moving forward, press the water dispense button (if available, typically on the handle) to activate the water supply. The fast-rotating microfibre roller will simultaneously wipe your floors with clean water.
4. Drying (Backward Motion): Pull the JetClean backward over the same path. The unique rubber lip will absorb remaining water, leaving the floor clean and dry.
5. Netwayaj Spot: For stubborn stains, move the appliance over the affected area multiple times until the stain is removed.

Dual Tank System

The JetClean features a dual tank system, ensuring you always clean with fresh water. The clean water tank supplies water to the microfibre roller, while the dirty water tank collects the absorbed soiled water, preventing cross-contamination.

Suitable Floor Types

The Vileda JetClean is suitable for all sealed hard floor types, including:

• Sele Bois
• Plastifye
• Mozayik
• Stone
• PVC

Antretyen

Regular maintenance ensures optimal performance and longevity of your Vileda JetClean. Always unplug the appliance before performing any maintenance.

Fonksyon pwòp tèt ou netwayaj

The JetClean features an Easy Cleaning storage compartment with a self-cleaning function for the microfibre roller:

1. Place the JetClean in its designated parking and cleaning station.
2. Add approximately 150 ml of clean water to the cleaning station.
3. Activate the self-cleaning function (refer to your device's specific button or mode, usually by pressing the power button while in the station). The microfibre roller will rotate and clean itself.
4. After approximately 60 seconds, the self-cleaning process is complete.

Netwayaj manyèl

• Tank dlo sal: After each use, remove the dirty water tank, empty its contents, and rinse it thoroughly under running water.
• Microfibre Roller: The microfibre roller can be easily removed for deeper cleaning or replacement. Rinse it under running water.
• Roller Cover: The roller cover can also be removed and rinsed under running water.
• Filtre: The high-quality double filter captures allergens and pollen. Clean or replace the filter regularly according to usage and the manufacturer's recommendations.

Depanaj

If you encounter any issues with your Vileda JetClean, refer to the following common problems and solutions:

• Aparèy la pa limen: Check if the power cord is securely plugged into both the appliance and a working electrical outlet. Ensure there is power to the outlet.
• Aspirasyon pòv: Check if the dirty water tank is full and needs emptying. Ensure the filter is clean and properly installed. Inspect the suction path for any blockages.
• Streaks on floor: Ensure the microfibre roller is clean. Use the self-cleaning function or manually clean the roller. Verify that the dirty water tank is not overfilled, as this can affect drying performance.
• Dlo pa ap distribye: Check if the clean water tank is filled. Ensure the water dispense button is being pressed correctly during forward motion.
• Leaking water: Ensure all tanks and covers are securely closed and properly seated. Check for any visible damage to seals or components.

Espesifikasyon

Garanti ak sipò

The Vileda JetClean comes with a 2-year warranty. For warranty claims, technical support, or spare parts, please refer to the contact information provided in your product packaging or visit the official Vileda website. This product has been tested and certified by TÜV Süd (GS - Tested Safety).

Enfòmasyon sou anviwònman an

Vileda is committed to environmental responsibility. This product is delivered in sustainable, eco-friendly packaging.

The Vileda JetClean is designed to remove over 99% of bacteria and viruses from hard floors with just water, reducing the need for harsh chemical cleaning agents.