Eurotime Quartz Alarm Clock Model 27000-03 User Manual

Entwodiksyon

The Eurotime Quartz Alarm Clock Model 27000-03 is designed for ease of use and features a silent, non-ticking quartz movement. It includes a crescendo alarm, snooze function, and a white backlight for nighttime visibility. This manual provides detailed instructions to help you get the most out of your alarm clock.

Figi 1: Devan view of the Eurotime Quartz Alarm Clock. This image displays the clock's face with yellow numbers, black hour and minute hands, and a silver second hand, all set within a white plastic casing.

Enstalasyon

1. Enstalasyon batri

Your Eurotime alarm clock requires 1 AA 1.5V alkaline battery (not included). For optimal performance and to avoid common functional errors, ensure a new, full alkaline battery is used. Non-alkaline batteries are not suitable for this model.

1. Louvri kouvèti lòj batri a ki sitiye sou do revèy la.
2. Insert one AA 1.5V alkaline battery, ensuring the polarity (+ and -) matches the indicators inside the compartment.
3. Fèmen kouvèti lòj batri a byen.

2. Setting the Time and Alarm

Use the adjustment knobs located on the back of the clock to set the current time and your desired alarm time.

1. Bouton pou ajiste tan: Rotate this knob to adjust the hour and minute hands to the current time.
2. Bouton pou ajiste alam: Rotate this knob to set the alarm hand to your desired wake-up time.

Figi 2: Retounen view of the alarm clock. This image highlights the battery compartment, the time setting knob, and the alarm setting knob, essential for initial setup.

Enstriksyon Operasyon

1. Turning the Alarm ON/OFF

A switch on the side of the clock controls the alarm function.

1. To activate the alarm, slide the switch to the ON pozisyon.
2. To deactivate the alarm, slide the switch to the OFF pozisyon.

Figi 3: Side view of the alarm clock. This image clearly shows the ON/OFF switch for the alarm function.

2. Fonksyon Snooze ak Limyè

The button located on the top of the clock serves two functions:

• Limyè: Press the button to illuminate the clock face with a white backlight for easy viewing in the dark. The light will stay on as long as the button is pressed.
• Repetisyon: When the alarm is sounding, press this button to temporarily silence the alarm. The alarm will sound again after approximately 5 minutes.

3. Alam Kwasanndo

The alarm features a crescendo (ascending) sound, meaning it starts softly and gradually increases in volume to gently wake you up.

Antretyen

Netwayaj

To clean your alarm clock, gently wipe the casing and plastic lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.

Ranplasman batri

If the second hand stops moving or the alarm function becomes unreliable, it is an indication that the battery needs to be replaced. Follow the battery installation steps outlined in the Setup section to replace the battery.

Depanaj

• Clock not working or alarm not sounding:
  The most common cause for functional errors is an incorrect or depleted battery. Ensure you are using a new, full 1.5V AA alkaline battery.
• Alarm sounds immediately after setting:
  Analog alarm clocks do not distinguish between AM and PM. If you set the alarm within approximately one hour of the current time, it may trigger immediately. To ensure the alarm sounds at the desired time (e.g., 7:00 AM), set it outside this one-hour window (e.g., set it at 9:00 PM for a 7:00 AM alarm).
• Second hand stops or clock runs intermittently:
  This indicates that the battery power is low and the battery needs to be replaced.

Espesifikasyon

Garanti ak sipò

For any further questions or issues with your Eurotime Quartz Alarm Clock, please contact the manufacturer or your retailer for assistance. Please refer to your purchase documentation for specific warranty information.