Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Enfòmasyon sou Sekirite

• Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak operasyon.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Kenbe aparèy la pa rive nan men timoun yo.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Mounting Support
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Gid demaraj rapid (manyèl sa a)

4. Pwodwi souview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Figi 1: Devan view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Konpozan kle:

• Lantiy PIR: Detects infrared radiation from moving bodies.
• Endikatè ki ap dirije: Provides status feedback (e.g., detection, low battery).
• Lòj batri: Li gen sous kouran an.
• Pwen Montaj: For secure installation on a wall.
• Tamper Chanje: Triggers an alarm if the sensor cover is opened.

5. Enstalasyon

5.1. Enstalasyon batri

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Enstalasyon Capteur a

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Sèvi ak bracket aliye a kòm yon modèl pou make pozisyon vis yo sou miray la.
3. Fè twou nan pozisyon ki make yo epi mete ploge miray yo.
4. Fikse sipò montaj la sou miray la avèk vis yo bay yo.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Fonksyonman Capteur a

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Ki ap dirije Endikatè Estati

• Brief Flash: Endike deteksyon mouvman.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Pa gen limyè: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view olye ke dirèkteman nan direksyon li.

7. Antretyen

7.1. Netwayaj

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Ranplasman batri

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Chèk regilye

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

NAN. Depanaj

9. Espesifikasyon

• Mak: Intelbras
• Modèl: IVP2000SF
• Sous pouvwa: Batri mache
• Kalite batri: Alkalin
• Kalite montaj: Mi mòn
• Aparèy konpatib: Intelbras security systems and smart home hubs
• Dimansyon pwodwi: Apeprè 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 pous)
• Metòd deteksyon: Enfrawouj pasif (PIR)
• Ranje deteksyon: Jiska 12 mèt (39 pye)
• Ang deteksyon: Apeprè 90 degre
• Anviwònman Fonksyònman: Itilize andedan kay la sèlman

10. Enfòmasyon sou Garanti

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras websit la oubyen kontakte sèvis kliyan yo. Kenbe prèv acha ou pou reklamasyon garanti.

11. Sipò

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Websit: Visit the official Intelbras websit pou resous sipò, FAQ, ak enfòmasyon pou kontakte yo.
• Telefòn: Refer to the contact section on the Intelbras websit pou nimewo sipò lokal yo.