Enfòmasyon enpòtan sou sekirite
Tanpri li tout enstriksyon yo ak anpil atansyon anvan ou monte epi itilize li. Kenbe manyèl sa a pou referans pita.
- Kapasite pwa maksimòm: 275 liv (125 kg). Pa depase limit sa a.
- Asire ke tout vis ak boulon byen sere anvan ou itilize.
- Pa kanpe sou chèz la.
- Sèvi ak chèz la sou yon sifas ki plat.
- Kenbe timoun yo lwen pati k ap deplase yo.
Lis Pati
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Syèj (1)
- Dosye (1)
- Akoudwa (2)
- baz (1)
- Woulo (5)
- Silenn asansè gaz (1)
- Kouvèti Asansè Gaz (1)
- Pakè pyès ki nan konpitè (vis, rondelles, kle Allen)
Figi 1: Eksploze view of chair components. Ensure all parts are accounted for before assembly.
Enstalasyon ak Asanble
Follow these steps for easy assembly. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
Etap 1: Mete wou yo nan baz la
- Insert each of the five casters into the holes at the end of each leg of the chair base.
- Push firmly until each caster clicks securely into place.
Figi 2: The assembled chair base with casters and the gas lift cylinder inserted.
Etap 2: Enstale Asansè Gaz la ak Kouvèti a
- Place the gas lift cover over the top of the gas lift cylinder.
- Insert the narrow end of the gas lift cylinder into the center hole of the assembled base.
Step 3: Attach Armrests to Seat
- Align the armrests with the pre-drilled holes on the underside of the seat cushion.
- Secure each armrest using the provided screws and washers. Do not overtighten.
Figi 3: Detail of the armrest connection point to the seat cushion.
Step 4: Attach Backrest to Seat and Armrests
- Align the backrest with the rear attachment points on the seat and the armrests.
- Secure with the remaining screws and washers. Ensure all connections are firm.
Figi 4: The fully assembled executive desk chair.
Etap 5: Konekte Asanble Syèj la ak Asansè Gaz la
- Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center mechanism aligns with the top of the cylinder.
- Peze desann byen fèm pou sekirize koneksyon an.
Enstriksyon Operasyon
The Amazon Basics Executive Desk Chair offers several adjustable features for personalized comfort.
Ajisteman Wotè
- To raise the seat: While standing, pull the lever located under the right side of the seat upwards. The seat will rise automatically. Release the lever at the desired height.
- To lower the seat: While seated, pull the lever located under the right side of the seat upwards. The seat will lower. Release the lever at the desired height.
Figi 5: The lever for adjusting chair height and tilt lock.
Panche mekanis
- To unlock the tilt: Pull the same lever (used for height adjustment) outwards from the chair. The backrest will now recline.
- To lock the tilt: Push the lever inwards towards the chair. The backrest will lock in its upright position.
Ajisteman tansyon enklinezon
- To adjust the tension of the tilt mechanism, turn the round knob located under the front-center of the seat.
- Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
Figi 6: The executive chair positioned at a desk, demonstrating its use.
Antretyen ak Swen
Proper maintenance ensures the longevity and appearance of your executive chair.
- Netwayaj: Spot clean the LeatherSoft polyurethane upholstery with a damp twal ak savon dou. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Enspeksyon: Tcheke tout vis ak boulon yo detanzantan pou asire yo rete byen sere. Sere boulon yo si sa nesesè.
- Woulèt: Kenbe wou yo pwòp san debri pou asire yo woule san pwoblèm.
- Evite limyè solèy la dirèk: Ekspozisyon pwolonje nan limyè solèy dirèk ka lakòz amebleman an defòme oswa fann.
Depanaj
Si ou rankontre nenpòt pwoblèm ak chèz ou a, gade pwoblèm ak solisyon komen sa yo.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chèz la pa ajiste wotè. | Silenn asansè gaz la pa fonksyone byen oubyen levye a pa angaje. | Ensure the height adjustment lever is fully pulled. If the issue persists, the gas lift cylinder may need replacement. |
| Chair is wobbly. | Vis ki lach oswa move asanblaj. | Check and tighten all assembly screws. Ensure the base and gas lift are securely connected. |
| Rou yo pa woule san pwoblèm. | Debri nan wou yo oubyen wou ki domaje. | Clean any hair or debris from the caster wheels. If damaged, replace casters. |
| Backrest does not tilt or lock. | Tilt lock lever not engaged or tension too high. | Ensure the tilt lock lever is correctly positioned. Adjust the tilt tension knob. |
Espesifikasyon
- Non modèl: GF-80747H-3
- Mak: Amazon Basics
- Koulè: Gri
- Materyèl: LeatherSoft (Polyurethane, Faux Leather), Foam fill
- Dimansyon pwodwi: 29.13"D x 25.2"W x 43.11"H
- Rekòmandasyon pou pwa maksimòm: 275 liv
- Pwa atik: 40 liv
- Karakteristik espesyal: Adjustable Height, Tilt Mechanism, Swivel, Padded Armrests
- Konfòmite: BIFMA standard
Videyo pwodwi
Watch these official product videos for visual guidance on assembly and features.
Amazon Basics Executive Desk Chair Overview
Videyo sa a bay yon apèsi jeneral souview of the Amazon Basics Executive Desk Chair, highlighting its design and key features. It demonstrates the chair's swivel and rolling capabilities, as well as the padded armrests and overall comfort.
Comfort and Adjustability Features
This video showcases the comfort and adjustability of the chair, including the soft LeatherSoft material, back support, and the functionality of the height adjustment and tilt mechanisms. It emphasizes the chair's suitability for extended use.
Garanti ak sipò
Pou enfòmasyon sou garanti a oswa pou sipò kliyan, tanpri al gade gid ofisyèl Amazon Basics yo. website or contact their customer service directly. This product complies with BIFMA standards.
Enfòmasyon sou sekirite: Max weight limit: 275 lbs. Assembly requires careful following of instructions.
