Raspberry Pi 4 Model B User Manual

Entwodiksyon

The Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Raspberry Pi 4 Model B.

Gid Enstalasyon

1. Ki sa ki nan bwat la

The Raspberry Pi 4 Model B package typically includes the board only. Additional components are required for operation.

• Raspberry Pi 4 Model B board

2. Konpozan obligatwa (pa enkli)

• Pwovizyon pou pouvwa: A 5.1V, 3A USB Type-C power supply is required.
• Kat mikwo SD: A high-quality micro SD card (minimum 8GB recommended) for the operating system and data storage.
• Ekspozisyon kab: Micro HDMI to HDMI cable(s) for connecting to a monitor (supports up to two 4K displays).
• Periferik: USB klavye ak sourit.
• Si ou vle: Ethernet cable for wired network, PoE HAT for Power over Ethernet.

3. Initial Hardware Connection

1. Prepare Micro SD Card: Download and flash an operating system (e.g., Raspberry Pi OS) onto the micro SD card using a tool like Raspberry Pi Imager.
2. Mete Micro SD Kat: Gently insert the prepared micro SD card into the card slot on the underside of the Raspberry Pi board.
3. Konekte Ekspozisyon: Connect your monitor(s) to the micro HDMI ports using appropriate cables. The Raspberry Pi 4 has two micro HDMI ports.
4. Konekte periferik: Plug in your USB keyboard and mouse into the available USB 2.0 or USB 3.0 ports.
5. Konekte Rezo a (Si ou vle): If using a wired connection, plug an Ethernet cable into the Gigabit Ethernet port.
6. Konekte pouvwa: Finally, connect the 5.1V, 3A USB Type-C power supply to the USB-C power port. The Raspberry Pi will power on automatically.

Image: Raspberry Pi 4 Model B board with various ports and components visible.

Imaj: Anwo-anba view of the Raspberry Pi 4 Model B, showing the processor, RAM, and various chips.

Imaj: Bò kote view of the Raspberry Pi 4 Model B, highlighting the USB and Ethernet ports.

Enstriksyon Operasyon

1. First Boot and OS Configuration

Upon first boot, the Raspberry Pi OS will guide you through an initial setup wizard. This includes setting your country, language, timezone, creating a user password, connecting to Wi-Fi, and updating software.

2. Koneksyon

• Wi-Fi: The Raspberry Pi 4 supports dual-band 2.4 GHz and 5.0 GHz 802.11ac Wi-Fi. Connect via the desktop environment's network manager.
• Bluetooth: Bluetooth 5.0 is integrated. Pair devices through the Bluetooth manager in the desktop environment.
• Ethernet: Gigabit Ethernet provides a stable wired network connection.
• Pò USB: Utilize the two USB 3.0 ports (blue) for high-speed peripherals and two USB 2.0 ports (black) for standard devices like keyboards and mice.

3. Sòti videyo

The Raspberry Pi 4 features two micro HDMI ports, allowing for dual-monitor setups. It supports resolutions up to 4Kp60. Ensure your monitors and cables support the desired resolution.

4. GPIO Pins

The 40-pin GPIO (General Purpose Input/Output) header allows for interfacing with a wide range of electronic components, sensors, and custom hardware. Refer to the official Raspberry Pi documentation for detailed pinout diagrams and programming guides.

Antretyen

1. Refwadisman

The Raspberry Pi 4 Model B can generate heat under heavy load. For sustained performance, especially in enclosed cases or high ambient temperatures, consider using a heatsink or an active cooling solution (fan).

2. Mizajou lojisyèl

Regularly update your operating system and installed software to ensure optimal performance, security, and access to the latest features. This can typically be done via the terminal using commands like sudo apt update epi sudo apt full-upgrade.

3. Netwayaj

Keep the board free from dust and debris. Use compressed air or a soft brush to gently clean the components. Ensure the device is powered off and disconnected from all power sources before cleaning.

Depanaj

• Pa gen pouvwa/demaraj: Ensure you are using a 5.1V, 3A USB-C power supply. Check that the micro SD card is properly inserted and has a valid operating system image.
• Pa gen okenn rezilta ekspozisyon: Verify that the micro HDMI cables are securely connected to both the Raspberry Pi and the monitor. Try different micro HDMI ports or cables. Ensure your monitor is set to the correct input source.
• Pwoblèm Wi-Fi/Bluetooth: Check network settings in the OS. Ensure the Raspberry Pi is within range of your Wi-Fi router. For Bluetooth, ensure the device you are trying to pair is in pairing mode.
• Surchof: If the board feels excessively hot or performance degrades, consider adding a heatsink or fan. Ensure adequate airflow around the board, especially if it's in an enclosure.
• Koripsyon Kat SD: Powering off the Raspberry Pi without proper shutdown can corrupt the SD card. Always use the shutdown option in the OS before disconnecting power. If corruption occurs, you may need to re-flash the OS.

For more detailed troubleshooting, consult the extensive online community forums and official Raspberry Pi documentation.

Espesifikasyon

Enfòmasyon sou Garanti

For specific warranty details, please refer to the official Raspberry Pi website or the documentation provided with your purchase. Warranty terms typically cover manufacturing defects for a limited period from the date of purchase.

Sipò ak Resous

For further assistance, detailed documentation, and community support, please visit the following resources:

• Manyèl Itilizatè Ofisyèl (PDF): Telechaje PDF
• Raspberry Pi Official Websit: raspberrypi.org
• Fowòm Kominote: Engage with the global Raspberry Pi community for projects, advice, and troubleshooting.