Pwodwi souview
The Feit Electric PLUG/WIFI/WP Wi-Fi enabled outdoor smart plug provides convenient control over two outdoor devices from any location. This smart plug allows you to transform any standard device into a smart device, enabling power control, scheduling, and timer functions directly from an intuitive smartphone application. It supports grouping of devices for simplified control and integrates seamlessly with voice assistants like Alexa and Google Assistant. Designed for outdoor use, it is ETL Wet location rated.
Figure 1: Feit Electric Smart Outdoor Plug (Model PLUG/WIFI/WP)
Enstalasyon ak Enstalasyon
Ki sa ki nan bwat la
- Feit Electric Smart Outdoor Plug (PLUG/WIFI/WP)
Etap Enstalasyon Inisyal yo
- Ploge nan: Plug the Smart Wi-Fi Outdoor Plug into an outdoor-rated electrical outlet.
Ensure the plug is securely connected to a suitable outdoor outlet.
- Tcheke Limyè Endikatè: The indicator light on the plug must be blinking rapidly to connect. If the light is not blinking rapidly, press and hold the power button on the plug for 5 seconds until it starts blinking rapidly.
- Telechaje epi ouvri aplikasyon an: Download the Feit Electric App from your smartphone's app store. Open the Feit Electric App.
- Ajoute Aparèy: In the app, choose a location (e.g., "Home") and tap "Add Device" or the "+" icon in the upper right corner.
- Chwazi Kalite Aparèy: Select "Plugs" and then "Outdoor Plug".
- Konfime flache a: If the indicator light is blinking rapidly, press "Confirm" in the app.
- Antre modpas Wi-Fi: You will be prompted to enter the password for your Wi-Fi network. Note: This app and device only work with 2.4GHz Wi-Fi networks. 5GHz networks are not supported. Ensure your phone and device are as close to your router as possible during connection.
Figure 2: App interface for Wi-Fi connection.
- Pwosesis Koneksyon: The plug will begin connecting. If the connection fails, verify your Wi-Fi password (it is case-sensitive) and ensure you are on a 2.4GHz network. You may need to close the app and repeat the steps or consult the help section within the app.
- Rename Device (Optional): Once successfully added, you can rename the plug by tapping the pen icon, entering a new name, and tapping "Save", then "Done".
Operasyon
Once your Feit Electric Smart Outdoor Plug is successfully set up, you can control it and connected devices using the Feit Electric App or voice commands.
Karakteristik kontwòl App
- Aksè Remote: Power devices on or off from anywhere using your smartphone.
- Orè: Set daily or weekly schedules for devices to turn on and off automatically. This is ideal for holiday lights or garden features.
Figure 3: Setting up schedules for automated control.
- Countdown minutri: Set a countdown for devices to turn off after a specified duration.
- Pataje Aparèy: Share control of the smart plug with multiple users through the app.
- Gwoupman: Group multiple smart plugs or other Feit Electric smart devices together for unified control with a single tap.
Figure 4: Grouping multiple plugs for simultaneous control.
Kontwòl vwa
The Feit Electric Smart Outdoor Plug is compatible with Amazon Alexa and Google Assistant. Once connected, you can use simple voice commands to control your connected devices. For example, "Alexa, turn off the lights outside."
Antretyen
The Feit Electric Smart Outdoor Plug is ETL Wet location rated, designed to withstand various weather conditions. To ensure optimal performance and longevity:
- Regularly inspect the plug and connected cords for any signs of damage or wear.
- Keep the plug free from excessive dirt, debris, or standing water. Wipe clean with a damp twal si sa nesesè.
- When not in use for extended periods, store the plug in a dry, protected area.
Figure 5: The plug is designed to be weather resistant.
Depanaj
If you encounter issues with your Feit Electric Smart Outdoor Plug, please refer to the official Gid depanaj (PDF) for comprehensive solutions. Below are some common troubleshooting tips:
- Ploge a pa konekte ak Wi-Fi a:
- Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz networks.
- Verify that you have entered the correct Wi-Fi password. Passwords are case-sensitive.
- Try moving the smart plug closer to your Wi-Fi router during the setup process.
- Reset the smart plug by holding the power button for 5 seconds until the indicator light blinks rapidly.
- Pwoblèm kontwòl vwa:
- Ensure your smart plug is properly linked to your Alexa or Google Assistant account through the Feit Electric App.
- Tcheke koneksyon entènèt ou ak estati aparèy asistan vwa ou a.
- Aparèy pa reponn:
- Unplug the smart plug from the outlet, wait a few seconds, and plug it back in.
- Check if your Wi-Fi network is active and stable.
Espesifikasyon pwodwi
| Spesifikasyon | Valè |
|---|---|
| Dimansyon pwodwi | 1.6 x 1.5 x 2.6 inches; 7.83 ounces (2.6"D x 1.6"W x 1.5"H) |
| Nimewo Modèl Atik | PLUG/WIFI/WP |
| Dat Premye Disponib | 11 jen 2019 |
| Manifakti | Feit elektrik |
| ASIN | B07SXDCF7R |
| Peyi orijin | USA |
| Mak | Feit elektrik |
| Koulè | NWA |
| Voltage | 120 Volts |
| Materyèl | Plastik |
Figure 6: Additional product information and specifications.
Garanti ak sipò
Garanti limite
Pwodui sa a garanti pou li pa gen defo nan atizan konn fè ak materyèl pou jiska 1 ane apati dat achte a. Si pwodwi a echwe nan peryòd garanti a, tanpri kontakte Feit Electric nan info@feit.com oswa vizite feit.com/contact-us pou enstriksyon sou ranplasman oswa ranbousman. Ranplasman oswa ranbousman se sèl remèd ou. EKsepte nan limit ki entèdi pa lwa ki aplikab, nenpòt garanti enplisit yo limite nan DURATION nan dire a nan garanti sa a. RESPONSABLITE POU DOMAJ ENSIDAN OU KONSEKANSYÈL SE MENM EKLISMAN EKLIZE. Gen kèk eta ak pwovens ki pa pèmèt esklizyon domaj ensidan oswa konsekan, kidonk limitasyon ki pi wo a oswa esklizyon pa ka aplike pou ou. Garanti sa a ba ou dwa legal espesifik, epi ou ka genyen tou lòt dwa ki varye de eta a eta oswa pwovens an pwovens.
Atansyon
RISK CHÒK ELEKTRIK. Pa sèvi ak si eksteryè lamp envelope is damaged or broken. Use only on 120 volt 60Hz circuits. Suitable for damp locations. Minimum starting temperature -25°C (-13°F). This device is not intended for use with emergency exit fixtures or emergency lights. Lamp may not be compatible with all dimmers. When installing, make sure that power is switched off before connecting or disconnecting to fixture. Do not look directly into the light. For more information including dimmer compatibility visit www.feit.com. Patent: feit.com/patents
The performance specifications (lumens, watts, life, CCT, and CRI) printed on this product package should only be considered an approximation of expected performance.
