PowerA Spectra Enhanced Illuminated Wired Controller User Manual

1. Entwodiksyon

This manual provides instructions for the PowerA Spectra Enhanced Illuminated Wired Controller. This controller is designed for use with Xbox One, Xbox Series X|S, and Windows 10/11, offering enhanced features such as customizable LED lighting, mappable advanced gaming buttons, and adjustable trigger locks.

2. Pake kontni

• PowerA Spectra Enhanced Illuminated Wired Controller
• Detachable 9.8ft (3m) Braided USB Cable with Snap-Lock and Inline Release

Figure 2.1: Controller and detachable USB cable.

3. Enstalasyon ak Koneksyon

1. Konekte kab USB a: Insert the small end of the detachable braided USB cable into the micro USB port on the top of the controller. Ensure it clicks securely into place with the snap-lock mechanism.
2. Konekte ak konsole/PC a: Plug the standard USB end of the cable into an available USB port on your Xbox One, Xbox Series X|S console, or Windows 10/11 PC.
3. Pouvwa sou: The controller will automatically power on and connect to your device. The LED illumination will activate.

Figure 3.1: USB cable connection point on the controller.

4. Operasyon Enstriksyon

4.1 Kontwolè Layout

The PowerA Spectra Enhanced controller features a standard Xbox layout with additional enhancements. Refer to the diagram below for key components.

Figi 4.1: Devan ak dèyè view of the controller with feature callouts.

4.2 Advanced Gaming Buttons (Mappable)

The controller includes two mappable Advanced Gaming Buttons on the back. These can be programmed to replicate any standard button input for quick access.

1. Mòd pwogram: Press and hold the Program Button (located on the back, near the center) for 2 seconds. The LED indicator will flash to signal program mode.
2. Select Button to Map: Press the button you wish to map (A, B, X, Y, LB, RB, LT, RT, Left Stick Click, Right Stick Click, D-pad).
3. Assign to Advanced Button: Press one of the Advanced Gaming Buttons (AGB1 or AGB2) on the back of the controller. The LED indicator will stop flashing, confirming the button has been mapped.
4. Klè kat jeyografik: To clear a single Advanced Gaming Button, repeat the mapping process but do not press any button after entering program mode. Instead, press the Advanced Gaming Button you wish to clear twice. To clear all mappings, hold the Program Button for 5 seconds.

Figure 4.2: Location of Advanced Gaming Buttons and Program Button.

4.3 ki ap dirije ekleraj

The controller features vibrant LED edge lighting in 7 colors (Red, Orange, Yellow, Green, Blue, Indigo, Violet). Use the Color-Cycle Button (located on the back, near the center) to adjust the lighting.

• Chanje koulè: Press the Color-Cycle Button to cycle through the 7 available colors.
• Sik Otomatik: Hold the Color-Cycle Button for 2 seconds to activate auto-cycle mode, where the colors will continuously fade and change.
• Etenn LED yo: Press and hold the Color-Cycle Button again for 2 seconds to turn off the LED illumination.

Green dirije

Blue dirije

Koulè wouj violèt ki ap dirije

Cyan dirije

Orange dirije

4.4 3-Way Trigger Locks

The controller features 3-way trigger locks for the Left Trigger (LT) and Right Trigger (RT). These switches allow you to adjust the travel distance of the triggers, enabling quicker response times in certain games.

• Full Travel: Default position for maximum trigger movement.
• Medium Travel: Reduces trigger travel for a faster response.
• Short Travel: Minimizes trigger travel for the quickest possible input.

Adjust the physical switches on the back of the controller to select your preferred trigger travel setting.

Figure 4.3: Location of 3-way trigger locks.

4.5 3.5mm Stereo Headset Jack

A 3.5mm stereo headset jack is located on the bottom of the controller, allowing you to connect your gaming headset for audio and chat functionality.

Figure 4.4: Location of the 3.5mm stereo headset jack.

5. Antretyen

• Netwayaj: Use a soft, dry cloth to clean the controller. Avoid using abrasive cleaners or solvents, as these can damage the surface.
• Swen kab: Handle the detachable USB cable with care. Avoid sharp bends or excessive pulling. Always disconnect the cable by gripping the connector, not the cable itself.
• Depo: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

NAN. Depanaj

If you continue to experience issues, please visit the official PowerA support websit pou plis asistans.

7. Espesifikasyon

• Nimewo Modèl: 1510523-01
• Konpatibilite: Xbox One, Xbox Series X|S, Windows 10/11
• Koneksyon: Fil USB
• Longè kab: 9.8 ft (3 meters) braided, detachable
• Ekleraj: 7-color LED edge lighting
• Karakteristik espesyal: 2 mappable Advanced Gaming Buttons, 3-way Trigger Locks, Dual Rumble Motors, 3.5mm Stereo Headset Jack, Anti-friction Rings on thumb sticks
• Dimansyon (Anbalaj): Apeprè 7.76 x 7.76 x 11.14 pous
• Pwa: Apeprè 15.8 ons
• Manifakti: PowerA

8. Garanti ak sipò

The PowerA Spectra Enhanced Illuminated Wired Controller comes with a 2-ane garanti limite apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal.

For warranty claims, technical support, or further product information, please visit the official PowerA support websit la oubyen kontakte sèvis kliyan yo dirèkteman.

PowerA Official Websit: www.powera.com