Manyèl Itilizatè Ponp Ranfòsè Presyon Truper 13499 PRES-1/3T

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo:

• Asire w ke ekipman pou pouvwa a koresponn ak vòltaj ponp lan.tage and frequency (127 V - 60 Hz).
• Dekonekte kouran an anvan ou fè nenpòt antretyen oswa enstalasyon.
• Pa fè ponp lan fonksyone avèk likid ki ka pran dife.
• Pwoteje ponp lan kont tanperati konjelasyon.
• Se yon pwofesyonèl kalifye ki ta dwe fè enstalasyon an si ou pa sèten.
• Kenbe timoun ak moun ki pa otorize lwen ponp ki ap fonksyone a.

3. Pwodwi konpozan

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

Figi 1: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

Konpozan kle:

• Kò ponp: Dark gray cast iron housing for the impeller and water channels.
• Lojman motè: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• Flow Chanje: Orange component with an arrow, detecting water flow to activate the pump.
• Kòd pouvwa: Electrical connection with an integrated on/off switch.

4. Enstalasyon ak Enstalasyon

Bon enstalasyon enpòtan anpil pou pèfòmans ak lonjevite ponp lan.

1. Kote:
   • Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures.
   • Ensure the pump is placed on a stable, level surface to minimize vibration.
   • Allow adequate space around the pump for ventilation and maintenance access.
2. Koneksyon plonbri:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. Koneksyon elektrik:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. Priming ponp lan:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. Operasyon Enstriksyon

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. Premye kòmansman:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • Ploge ponp lan nan yon priz elektrik apwopriye.
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. Operasyon otomatik:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. Sik devwa:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6. Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi ponp ou a.

• Netwayaj: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• Koneksyon: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• Winterization: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• Enspeksyon: Enspekte fil elektrik la pou wè siy domaj oswa mete. Ranplase si sa nesesè.

Warning: Always disconnect the pump from the power supply before performing any maintenance.

NAN. Depanaj

This section addresses common issues you might encounter with your pressure booster pump.

8. Espesifikasyon teknik

9. Garanti ak sipò

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper websit la oubyen kontakte sant sèvis otorize yo.