Orbit 24620 1-Outlet Hose Faucet Timer User Manual

Entwodiksyon

Thank you for choosing the Orbit 24620 1-Outlet Hose Faucet Timer. This device is designed to automate your watering schedule, providing convenience and efficiency for your lawn and garden. With its user-friendly interface and robust construction, you can easily program precise watering times, helping to conserve water and maintain healthy plants. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your timer.

Enfòmasyon enpòtan sou sekirite

• Read all instructions carefully before operating the timer.
• Do not immerse the timer in water. It is water-resistant, not waterproof.
• Use only fresh alkaline batteries of the specified type (e.g., AA or AAA). Do not mix old and new batteries or different battery types.
• Remove batteries if the timer will not be used for an extended period to prevent corrosion.
• Do not expose the timer to extreme temperatures (below freezing or above 120°F / 49°C).
• Asire ke tout koneksyon yo sere pou anpeche koule.
• Kenbe soti nan atenn timoun yo.

Pwodwi konpozan

Familiarize yourself with the main parts of your Orbit 1-Outlet Hose Faucet Timer:

• Koneksyon Inlet: Li konekte ak wobinèt deyò ou a.
• Koneksyon priz: Connects to your garden hose.
• Ekspozisyon dijital: Shows time, program settings, and status.
• Kontwole Dial: Used to navigate through programming options.
• Bouton: For setting specific values (e.g., "SET CLOCK", "START TIME", "HOW LONG", "HOW OFTEN", "AUTO/MANUAL", "OFF").
• Lòj batri: Located on the back or side, for battery installation.

Figi 1: Devan view of the Orbit 1-Outlet Hose Faucet Timer, showing the digital display and control dial. The inlet is at the top, and the outlet is at the bottom.

Enstalasyon ak Enstalasyon

1. Enstalasyon batri

1. Locate the battery compartment on the back or side of the timer.
2. Remove the battery tray or cover.
3. Insert two (2) new AA alkaline batteries, ensuring correct polarity (+/-).
4. Replace the battery tray or cover securely. The display should light up.

2. Attaching the Timer to the Faucet

1. Asire w ke wobinèt deyò w la fèmen.
2. Thread the timer's inlet connection (top) onto your outdoor faucet.
3. Hand-tighten until snug. Do not overtighten.
4. Turn on your faucet fully. The timer is designed to operate under full water pressure.

3. Mete tiyo a an kontak

1. Thread your garden hose onto the timer's outlet connection (bottom).
2. Men-sere boulon jiskaske byen byen.

Figi 2: Side view of the Orbit 1-Outlet Hose Faucet Timer, showing the robust construction and connections.

Enstriksyon Operasyon

The Orbit timer features a large digital display and a simple dial for programming. Rotate the dial to select a setting, then use the buttons to adjust values.

1. Mete revèy

1. Vire rele nan Mete revèy.
2. Lè a ap flache. Sèvi ak la + epi - buttons to set the current hour (AM/PM).
3. Peze a PWOCHÈ bouton an pou ale nan minit yo.
4. Sèvi ak + epi - to set the current minutes.
5. Peze PWOCHÈ pou konfime.

2. Kòmanse Tan

1. Vire rele nan KÒMANSE TAN.
2. Set the desired time for watering to begin using the + epi - buttons for hour and minutes.
3. Peze PWOCHÈ pou konfime.

3. How Long (Watering Duration)

1. Vire rele nan KONBYEN TAN.
2. Set the duration for each watering cycle from 1 to 360 minutes using the + epi - bouton.
3. Peze PWOCHÈ pou konfime.

4. How Often (Watering Frequency)

1. Vire rele nan Konbyen fwa.
2. Mete frekans lan:
   • Every hour (for short, frequent watering)
   • Every 6, 12 hours
   • Every 1, 2, 3... up to 7 days
3. Sèvi ak la + epi - buttons to select the desired interval.
4. Peze PWOCHÈ pou konfime.

5. Auto/Manual Operation & Rain Delay

• OTO: Vire rele nan OTO/MANYÈL. The timer will now operate according to your programmed schedule.
• MANYÈL: To manually water, turn the dial to OTO/MANYÈL, Lè sa a, peze la MANYÈL bouton. Sèvi ak + epi - to set a manual watering duration, then press ANTRE to start. The timer will revert to AUTO after the manual cycle.
• RETAN LAVYE: If rain is expected, you can pause your watering schedule. Turn the dial to OTO/MANYÈL, Lè sa a, peze epi kenbe la DETA LAPLUI bouton. Sèvi ak + epi - to select a delay of 1 to 7 days. The timer will resume its schedule after the delay.

6. OFF

Vire rele nan OFF to stop all automatic and manual watering. The timer will remain off until the dial is moved to another setting.

Antretyen

Ranplasman batri

When the battery indicator on the display shows low power, or if the display becomes dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup and Installation" section. Replacing batteries typically retains your programmed settings for a short period, but it's good practice to verify them after replacement.

Netwayaj

Siye revèy la ak anonsamp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.

Winterization

Before the first frost, remove the timer from the faucet. Drain any water from the timer and store it indoors in a dry, protected location where temperatures will not drop below freezing. Remove batteries before storage.

Depanaj

Espesifikasyon

Figi 3: Dimensions of the Orbit 1-Outlet Hose Faucet Timer: 7.62cm depth, 18.11cm height, 22.56cm width.

Enfòmasyon sou Garanti

Orbit products are manufactured with quality materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Orbit websit la. Kenbe resi acha ou kòm prèv acha.

Sipò pou Kliyan

If you have any questions, require technical assistance, or need to troubleshoot issues not covered in this manual, please contact Orbit customer support.

• Websit: www.orbitanline.com
• Telefòn: Refer to the Orbit websit pou nimewo kontak rejyonal yo.