La Crosse Technology 513-1417CH-INT Digital Wall/Table Clock Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the setup, operation, and maintenance of your La Crosse Technology 513-1417CH Digital Wall/Table Clock. This atomic clock features a large, easy-to-read display showing time, day of week, date, indoor/outdoor temperatures, and moon phase. It includes a wireless outdoor temperature sensor for accurate external readings and can be mounted on a wall or placed on a table using its built-in stand.

Kontni pake

• 1 x Digital Wall/Table Clock (Model: 513-1417CH-INT)
• 1 x Wireless Outdoor Temperature Sensor (Model: TX141-BV3)
• 1 x manyèl enstriksyon

Enstalasyon

1. Enstalasyon batri

The clock and the outdoor sensor each require 2 AA batteries (not included). For optimal performance and longevity, especially in outdoor conditions, it is recommended to use Energizer Ultimate Lithium batteries.

1. Open the battery compartment on the wireless outdoor temperature sensor.
2. Insert 2 fresh AA batteries, observing the correct polarity (+/-).
3. Close the battery compartment. The sensor's LED indicator will flash once.
4. Open the battery compartment on the main clock unit.
5. Insert 2 fresh AA batteries, observing the correct polarity (+/-).
6. Close the battery compartment. The clock will power on and begin searching for the outdoor sensor signal and the WWVB atomic time signal.

2. Plasman Capteur Deyò

Place the wireless outdoor sensor in a shaded, dry location to ensure accurate temperature readings and to protect it from direct sunlight and rain. An ideal location is under an eave or a covered porch. The sensor has a transmission range of up to 300 feet (100 meters).

Image: La Crosse Technology Digital Clock with its remote outdoor temperature sensor. The sensor is shown next to the clock, indicating its wireless connection.

3. Initial Time and Date Settings

The clock is designed to automatically set the time and date via the WWVB atomic time signal. However, you can manually configure settings if needed.

1. Kenbe la SET button (located on the top edge of the clock) for 3 seconds to enter the settings menu.
2. Sèvi ak la + or - bouton pou ajiste valè yo.
3. Peze a SET bouton pou konfime ajisteman yo epi ale nan pwochen atik la.
4. The settings menu order is: Language (English/Spanish) > Beep ON/OFF > Atomic ON/OFF > DST ON/OFF (Daylight Saving Time) > Time Zone (PST, MST, CST, EST) > Hour > Minute > Year > Month > Date > Temperature Unit (Fahrenheit/Celsius).
5. Once all settings are confirmed, the clock will return to normal display.

Imaj: Dèyè view of the La Crosse Technology Digital Clock, highlighting the battery compartment and printed instructions for setting time, date, atomic time search, and sensor search.

4. WWVB Atomic Time Signal

The clock automatically searches for the WWVB atomic time signal from Fort Collins, Colorado. This ensures accurate timekeeping. The signal icon on the display indicates reception status. If the signal is weak, try repositioning the clock. You can manually initiate a search by pressing the SET button to search for the WWVB atomic time signal.

Enstriksyon Operasyon

1. Montre Enfòmasyon

The large LCD display shows:

• Tan: Large 2.13-inch tall digits.
• Day of Week & Date: Automatically updated.
• Tanperati andedan kay la: Tanperati aktyèl anndan an.
• Tanperati deyò: Tanperati aktyèl ki soti nan detèktè san fil la.
• Faz Lalin: Montre faz linè aktyèl la.

Imaj: Devan view of the La Crosse Technology Digital Clock, showing the large digital display with time, date, indoor temperature, outdoor temperature, and moon phase.

2. Fonksyon alam

The clock includes an alarm function. To set or activate the alarm:

1. Peze a ALAM button (top edge) to view tan alam la.
2. Kenbe la ALAM bouton pou 3 segonn antre nan mòd anviwònman alam.
3. Sèvi ak la + or - bouton pou ajiste lè ak minit alam lan.
4. Peze ALAM konfime chak anviwònman.
5. Pou aktive/dezaktive alam lan, peze bouton an ALAM button once. An alarm icon will appear/disappear on the display.
6. To snooze, press the SNOOZE bouton lè alam la sonnen.

3. High/Low Temperature Records

The clock records the highest and lowest indoor and outdoor temperatures. To view dosye sa yo:

• Peze a + bouton pou view the highest recorded temperatures (HI TEMP).
• Peze a + bouton ankò pou view the lowest recorded temperatures (LO TEMP).
• Records reset automatically at midnight every day.

Antretyen

1. Ranplasman batri

Replace batteries in both the main unit and the outdoor sensor when the low battery indicator appears on the display. Always replace both batteries in the sensor and clock simultaneously to ensure proper synchronization.

2. Netwayaj

Sèvi ak yon mou, damp cloth to clean the clock and sensor. Avoid abrasive cleaners or chemicals that may damage the display or casing.

Depanaj

• No Outdoor Temperature Reading: Ensure the outdoor sensor batteries are fresh and correctly installed. Press and hold the - button on the main unit to initiate a sensor search. Move the sensor closer to the main unit to improve signal strength.
• Lè ki pa kòrèk: Verify that the correct time zone and DST settings are selected. Ensure the clock is receiving the WWVB atomic time signal (check the signal icon). If the signal is weak, try repositioning the clock away from electronic interference.
• Display Fading: Replace the batteries in the main unit.

Espesifikasyon

Image: The La Crosse Technology Digital Clock with its dimensions labeled as 12.8 inches wide, 6.61 inches high, and 1.14 inches deep.

Enfòmasyon sou Garanti

This La Crosse Technology product comes with a 1-ane garanti limite covering parts and labor from the date of purchase. For full warranty details and claims, please refer to the official La Crosse Technology support websit oswa kontakte sèvis kliyan.

Sipò

For additional support, troubleshooting tips, FAQs, and product registration, please visit the official La Crosse Technology support websit:

www.lacrossetechnology.com/support

Videyo pwodwi