1. Entwodiksyon
This manual provides essential information for the safe and efficient operation of your Amazon Basics 80W 2-Channel Class D Digital Power Amplifier (Model AP-16U). Please read these instructions thoroughly before using the product and retain them for future reference.
La amplifier delivers 80W per channel, features multi-zone compatibility, and includes auto-sensing for source selection, making it suitable for various home audio setups.
2. Enstriksyon Sekirite Enpòtan
- Li Enstriksyon: Read all safety and operating instructions before using the product.
- Kenbe enstriksyon yo: Kenbe sekirite ak enstriksyon operasyon yo pou referans nan lavni.
- Fè atansyon avètisman yo: Respekte tout avètisman sou pwodwi a ak nan enstriksyon yo opere.
- Swiv enstriksyon yo: Swiv tout enstriksyon operasyon ak itilizasyon.
- Dlo ak imidite: Pa sèvi ak aparèy sa a toupre dlo.
- Netwayaj: Netwaye sèlman ak yon twal sèk.
- Vantilasyon: Pa bloke okenn ouvèti vantilasyon. Enstale an akò ak enstriksyon manifakti a.
- Chalè: Pa enstale tou pre okenn sous chalè tankou radyatè, rejis chalè, recho, oswa lòt aparèy (tankou amplifiers) ki pwodui chalè.
- Pouvwa-kòd Pwoteksyon: Pwoteje kòd elektrik la pou yo pa mache oswa kwense, sitou nan priz, resipyan konvenyans, ak pwen kote yo sòti nan aparèy la.
- Atachman/akseswa: Sèvi ak sèlman atachman/akseswa manifakti a espesifye.
- Sèvis: Refere tout sèvis yo bay pèsonèl sèvis kalifye. Reparasyon nesesè lè aparèy la domaje nenpòt fason, tankou kòd kouran oswa ploge domaje, likid koule oswa objè tonbe nan aparèy la, aparèy la te ekspoze a lapli oswa imidite, li pa fonksyone nòmalman. , oswa li te tonbe.
3. Pake kontni
Asire w ke tout atik ki nan lis anba a prezan nan pake a:
- Amazon Basics 80W 2-Channel Class D Digital Power Amplifier
- Manyèl Mèt kay la
- Detachable kòd pouvwa
4. Pwodwi souview
4.1 Panèl devan
The front panel features controls for volume, balance, and speaker selection. A power indicator LED is also present.
- Endikatè pouvwa: Limen lè a amplifier se limen.
- Speaker A/B Buttons: Selects which set of speakers (A, B, or A+B) is active.
- Bouton balans: Adjusts the audio balance between the left and right channels.
- Volim bouton: Kontwole volim pwodiksyon an jeneral.
4.2 Panèl dèyè
The rear panel provides all necessary input and output connections, along with additional controls for tone and operational modes.
- Kontwòl Bas/Treble: Rotary controls for adjusting bass and treble levels (±12 dB). These are recessed and require a small screwdriver for adjustment.
- Interrupting Input (RCA): An auxiliary input that takes priority over the Main Input when an audio signal is detected.
- Main Input (RCA): The primary audio input for your source devices.
- Main Output (RCA): Provides an unprocessed audio output signal, useful for connecting to another amplifier oswa aparèy anrejistreman.
- Trigger In/Out (3.5mm): Allows for remote power control with other compatible audio equipment.
- Auto On Switch: Selects between Normal (manual power) and Auto (automatic power on/off based on audio signal detection) modes.
- Mono/Stereo Bridged Switch: Konfigirasyon an amplifier for stereo operation or bridged mono output.
- Tèminal Oratè (A & B): Connects to your passive speakers. Supports 8 Ohm speakers.
- Pouvwa Inlet: Connects the detachable power cord.
5. Enstalasyon ak Koneksyon
5.1 Konekte moun kap pale yo
- Asire w la ampLifitè a etenn epi li debranche.
- Connect your passive speakers to the Speaker A and/or Speaker B terminals on the rear panel. Ensure correct polarity (+ to + and - to -).
- Sa a amplifier is designed for 8 Ohm speakers. Using speakers with lower impedance may cause damage.
5.2 Konekte Sous Odyo yo
- Connect your primary audio source (e.g., CD player, streaming device) to the Antre prensipal la Jack RCA.
- If using an auxiliary source that requires priority (e.g., doorbell system, paging system), connect it to the Interrupting Input Jack RCA. La amplifier will automatically switch to this input when a signal is detected.
- For multi-zone setups, you can use the Trigger In/Out ports to synchronize power with other compatible devices.
5.3 Koneksyon pouvwa
- Connect the detachable power cord to the power inlet on the rear panel of the amplifier.
- Branche lòt bout kòd kouran an nan yon priz miray ki apwopriye.
This diagram illustrates typical connections from various audio sources to the amplifier and then to speakers.
Yon ansyenample setup showing the amplifier connected to a pair of bookshelf speakers.
6. Operasyon Enstriksyon
6.1 Limen/Etenyen
Yon fwa konekte, la amplifier can be powered on by pressing the power button on the front panel. The power indicator LED will illuminate. To power off, press the button again.
6.2 Volume and Balance Control
- Volim: Vire a Volim knob on the front panel clockwise to increase volume and counter-clockwise to decrease it.
- Balans: Sèvi ak la Balans knob to adjust the relative output level between the left and right speakers.
6.3 Kontwòl Ton
La Bass epi Treble controls on the rear panel allow for fine-tuning of the audio output. Use a small flat-head screwdriver to adjust these recessed knobs. Adjusting them clockwise increases the respective frequency, while counter-clockwise decreases it.
6.4 Auto-Sensing Source Selection
Mete la Oto Sou switch on the rear panel to 'Auto' for automatic power management. In this mode, the amplifier will power on when an audio signal is detected on either the Main or Interrupting input and will enter standby mode after a period of no signal.
6.5 Multi-Zone Compatibility
La amplifier's multi-zone compatibility, facilitated by the remote trigger, allows for integration into larger audio systems where devices in different rooms can be controlled synchronously.
6.6 Mono/Stereo Bridged Mode
La Mono/Stereo Bridged switch on the rear panel allows you to configure the amplifier. In 'Stereo' mode, it operates as a 2-channel amplifier. In 'Bridged' mode, the two channels are combined to provide a single, more powerful mono output. Consult a professional if you are unsure about using bridged mode.
7. Swen ak Antretyen
- Netwayaj: Dekonekte a amplifier from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol cleaners.
- Vantilasyon: Asire w ke ouvèti vantilasyon yo pa bloke pou anpeche surchof.
- Depo: Sere a ampSere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa | Power cord not connected; outlet not active; power switch off. | Check power cord connection; test outlet with another device; ensure power switch is on. |
| Pa gen son | Incorrect input selected; speaker wires loose; volume too low; source device not playing. | Verify input selection; check speaker wire connections and polarity; increase volume; ensure audio source is active. |
| Son defòme | Volume too high; incorrect tone settings; faulty speaker connection. | Reduce volume; adjust Bass/Treble controls; check speaker connections. |
| Auto On feature not working | Auto On switch set to 'Normal'; input signal too weak. | Set Auto On switch to 'Auto'; ensure strong audio signal from source. |
9. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | AP-16U |
| Sortie pouvwa | 80W x 2-channel |
| Kantite Chanèl | 2 |
| Dimansyon (L x W x H) | 15.9 x 6.3 x 2.9 pous (40.4 x 16 x 7.4 cm) |
| Pwa atik | 5.5 liv (2.5 kg) |
| Materyèl | Metal |
| Kalite aliye | Sifas mòn |
| UPC | 192233062501 |
10. Garanti ak Sipò Kliyan
This Amazon Basics product is backed by an Amazon Basics 1-Year Limited Standard Warranty. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the Amazon Basics websit.
For customer support, troubleshooting assistance, or to inquire about warranty claims, please contact Amazon Basics customer service through the Amazon websit entènèt la oswa platfòm acha ou a.
