Manyèl Itilizatè Limyè Kiltivasyon LED MARS HYDRO TS600 100W

1. Entwodiksyon

This manual provides essential information for the safe and effective use of your MARS HYDRO TS600 100W LED Grow Light. Please read all instructions carefully before installation and operation. This LED grow light is designed to provide full-spectrum illumination for indoor plants, supporting all stages of growth from seedling to bloom.

2. Enfòmasyon sou Sekirite

• Asire ekipman pou pouvwa a voltage is within the specified range (110-130V). Incorrect voltage ka domaje pwodwi a.
• Do not touch the light when it is working.
• Suitable for operation in ambient temperatures not exceeding 40°C.
• Apwopriye pou damp locations, but not for direct water exposure.
• Not suitable for intracanopy applications.
• Toujou dekonekte kouran an anvan ou netwaye oswa fè antretyen.
• Kenbe soti nan atenn timoun yo.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• 1 x MARS HYDRO TS600 LED Grow Light
• 2 x Adjustable Rope Hangers
• 2 x Hanging Kits (steel wire hangers)
• 1 x pouvwa kòd
• 1 x manyèl itilizatè

Figure 3.1: Contents of the MARS HYDRO TS600 package.

4. Enstalasyon

4.1 Mounting the Grow Light

1. Attach the hanging kits (steel wire hangers) to the designated points on the top of the TS600 LED Grow Light.
2. Connect the adjustable rope hangers to the steel wire hangers.
3. Hang the light securely from a sturdy support structure within your grow tent or growing area.
4. Adjust the height of the light using the rope hangers to achieve the desired distance from your plants.

Figure 4.1: MARS HYDRO TS600 LED Grow Light with included hanging accessories.

4.2 Konekte pouvwa

Plug the provided power cord into the light and then into a compatible 110-130V power outlet. Ensure the connection is secure.

5. Operasyon Enstriksyon

5.1 Light Spectrum

The TS600 features a full-spectrum LED design, including 730-740nm Red IR, 3200-4200Knm, and 5200-6800Knm spectra. This combination provides optimal light for all plant stages, promoting rapid growth from seed to flower and increasing yield and crop quality. Over 90% of the light energy can be absorbed by plants.

Figure 5.1: Full spectrum output of the TS600 LED Grow Light.

5.2 Recommended Hanging Heights

Adjust the light's height based on the plant's growth stage to optimize light intensity and coverage:

• Plantules Stage: Approximately 24 inches (60 cm) above the plants.
• Vejetatif Stage: Approximately 14 inches (36 cm) above the plants.
• Flè Stage: Approximately 12 inches (30 cm) above the plants.

Figure 5.2: Recommended hanging heights for different plant growth stages.

5.3 Zòn Kouvèti

The TS600 is ideal for a 2x2 ft (60x60cm) grow tent, providing uniform light distribution and maximizing plant yield. When paired with a high reflectivity tent, it efficiently harnesses light for robust growth.

Figure 5.3: PPFD (Photosynthetic Photon Flux Density) map for TS600 in a 2x2ft grow tent.

6. Antretyen

6.1 Netwayaj

Ensure the light is unplugged and cool before cleaning. Gently wipe the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.

6.2 Dissipation chalè

The TS600 features a high-reflective and noise-free fanless design with aluminum material for efficient heat dissipation. This design reduces heat loss and increases light intensity, allowing plants to receive more energy without the risk of burning.

Figure 6.1: Advanced cooling system for the TS600.

NAN. Depanaj

If you encounter any issues with your MARS HYDRO TS600 LED Grow Light, please refer to the following general advice:

• Limyè pa limen: Check the power cord connection and ensure the outlet is functional. Verify the voltage se nan seri a espesifye.
• Reduced light output: Ensure the light surface is clean and free from dust or debris.
• Surchof: While designed for efficient heat dissipation, ensure adequate airflow around the unit. Do not obstruct the heat sink.

For persistent issues, please contact MARS HYDRO customer support.

8. Espesifikasyon

9. Garanti & Sipò

The MARS HYDRO TS600 LED Grow Light comes with a 5-year warranty, as indicated in product information. For warranty claims, technical support, or any inquiries, please contact MARS HYDRO customer service.

You can also visit the official MARS HYDRO store for more products and information: Magazen MARS HYDRO

10. Pwodwi souview Videyo